.

vendor/golang.org/x/arch/AUTHORS

@@ -0,0 +1,3 @@
+# This source code refers to The Go Authors for copyright purposes.
+# The master list of authors is in the main Go distribution,
+# visible at https://tip.golang.org/AUTHORS.

vendor/golang.org/x/arch/CONTRIBUTORS

@@ -0,0 +1,3 @@
+# This source code was written by the Go contributors.
+# The master list of contributors is in the main Go distribution,
+# visible at https://tip.golang.org/CONTRIBUTORS.

vendor/golang.org/x/arch/LICENSE

@@ -0,0 +1,27 @@
+Copyright (c) 2015 The Go Authors. All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+   * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+   * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+   * Neither the name of Google Inc. nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

vendor/golang.org/x/arch/PATENTS

@@ -0,0 +1,22 @@
+Additional IP Rights Grant (Patents)
+
+"This implementation" means the copyrightable works distributed by
+Google as part of the Go project.
+
+Google hereby grants to You a perpetual, worldwide, non-exclusive,
+no-charge, royalty-free, irrevocable (except as stated in this section)
+patent license to make, have made, use, offer to sell, sell, import,
+transfer and otherwise run, modify and propagate the contents of this
+implementation of Go, where such license applies only to those patent
+claims, both currently owned or controlled by Google and acquired in
+the future, licensable by Google that are necessarily infringed by this
+implementation of Go.  This grant does not include claims that would be
+infringed only as a consequence of further modification of this
+implementation.  If you or your agent or exclusive licensee institute or
+order or agree to the institution of patent litigation against any
+entity (including a cross-claim or counterclaim in a lawsuit) alleging
+that this implementation of Go or any code incorporated within this
+implementation of Go constitutes direct or contributory patent
+infringement, or inducement of patent infringement, then any patent
+rights granted to you under this License for this implementation of Go
+shall terminate as of the date such litigation is filed.

vendor/golang.org/x/arch/x86/x86asm/Makefile

@@ -0,0 +1,3 @@
+tables.go: ../x86map/map.go ../x86.csv 
+	go run ../x86map/map.go -fmt=decoder ../x86.csv >_tables.go && gofmt _tables.go >tables.go && rm _tables.go
+

vendor/golang.org/x/arch/x86/x86asm/gnu.go

@@ -0,0 +1,956 @@
+// Copyright 2014 The Go Authors.  All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package x86asm
+
+import (
+	"fmt"
+	"strings"
+)
+
+// GNUSyntax returns the GNU assembler syntax for the instruction, as defined by GNU binutils.
+// This general form is often called ``AT&T syntax'' as a reference to AT&T System V Unix.
+func GNUSyntax(inst Inst, pc uint64, symname SymLookup) string {
+	// Rewrite instruction to mimic GNU peculiarities.
+	// Note that inst has been passed by value and contains
+	// no pointers, so any changes we make here are local
+	// and will not propagate back out to the caller.
+
+	if symname == nil {
+		symname = func(uint64) (string, uint64) { return "", 0 }
+	}
+
+	// Adjust opcode [sic].
+	switch inst.Op {
+	case FDIV, FDIVR, FSUB, FSUBR, FDIVP, FDIVRP, FSUBP, FSUBRP:
+		// DC E0, DC F0: libopcodes swaps FSUBR/FSUB and FDIVR/FDIV, at least
+		// if you believe the Intel manual is correct (the encoding is irregular as given;
+		// libopcodes uses the more regular expected encoding).
+		// TODO(rsc): Test to ensure Intel manuals are correct and report to libopcodes maintainers?
+		// NOTE: iant thinks this is deliberate, but we can't find the history.
+		_, reg1 := inst.Args[0].(Reg)
+		_, reg2 := inst.Args[1].(Reg)
+		if reg1 && reg2 && (inst.Opcode>>24 == 0xDC || inst.Opcode>>24 == 0xDE) {
+			switch inst.Op {
+			case FDIV:
+				inst.Op = FDIVR
+			case FDIVR:
+				inst.Op = FDIV
+			case FSUB:
+				inst.Op = FSUBR
+			case FSUBR:
+				inst.Op = FSUB
+			case FDIVP:
+				inst.Op = FDIVRP
+			case FDIVRP:
+				inst.Op = FDIVP
+			case FSUBP:
+				inst.Op = FSUBRP
+			case FSUBRP:
+				inst.Op = FSUBP
+			}
+		}
+
+	case MOVNTSD:
+		// MOVNTSD is F2 0F 2B /r.
+		// MOVNTSS is F3 0F 2B /r (supposedly; not in manuals).
+		// Usually inner prefixes win for display,
+		// so that F3 F2 0F 2B 11 is REP MOVNTSD
+		// and F2 F3 0F 2B 11 is REPN MOVNTSS.
+		// Libopcodes always prefers MOVNTSS regardless of prefix order.
+		if countPrefix(&inst, 0xF3) > 0 {
+			found := false
+			for i := len(inst.Prefix) - 1; i >= 0; i-- {
+				switch inst.Prefix[i] & 0xFF {
+				case 0xF3:
+					if !found {
+						found = true
+						inst.Prefix[i] |= PrefixImplicit
+					}
+				case 0xF2:
+					inst.Prefix[i] &^= PrefixImplicit
+				}
+			}
+			inst.Op = MOVNTSS
+		}
+	}
+
+	// Add implicit arguments.
+	switch inst.Op {
+	case MONITOR:
+		inst.Args[0] = EDX
+		inst.Args[1] = ECX
+		inst.Args[2] = EAX
+		if inst.AddrSize == 16 {
+			inst.Args[2] = AX
+		}
+
+	case MWAIT:
+		if inst.Mode == 64 {
+			inst.Args[0] = RCX
+			inst.Args[1] = RAX
+		} else {
+			inst.Args[0] = ECX
+			inst.Args[1] = EAX
+		}
+	}
+
+	// Adjust which prefixes will be displayed.
+	// The rule is to display all the prefixes not implied by
+	// the usual instruction display, that is, all the prefixes
+	// except the ones with PrefixImplicit set.
+	// However, of course, there are exceptions to the rule.
+	switch inst.Op {
+	case CRC32:
+		// CRC32 has a mandatory F2 prefix.
+		// If there are multiple F2s and no F3s, the extra F2s do not print.
+		// (And Decode has already marked them implicit.)
+		// However, if there is an F3 anywhere, then the extra F2s do print.
+		// If there are multiple F2 prefixes *and* an (ignored) F3,
+		// then libopcodes prints the extra F2s as REPNs.
+		if countPrefix(&inst, 0xF2) > 1 {
+			unmarkImplicit(&inst, 0xF2)
+			markLastImplicit(&inst, 0xF2)
+		}
+
+		// An unused data size override should probably be shown,
+		// to distinguish DATA16 CRC32B from plain CRC32B,
+		// but libopcodes always treats the final override as implicit
+		// and the others as explicit.
+		unmarkImplicit(&inst, PrefixDataSize)
+		markLastImplicit(&inst, PrefixDataSize)
+
+	case CVTSI2SD, CVTSI2SS:
+		if !isMem(inst.Args[1]) {
+			markLastImplicit(&inst, PrefixDataSize)
+		}
+
+	case CVTSD2SI, CVTSS2SI, CVTTSD2SI, CVTTSS2SI,
+		ENTER, FLDENV, FNSAVE, FNSTENV, FRSTOR, LGDT, LIDT, LRET,
+		POP, PUSH, RET, SGDT, SIDT, SYSRET, XBEGIN:
+		markLastImplicit(&inst, PrefixDataSize)
+
+	case LOOP, LOOPE, LOOPNE, MONITOR:
+		markLastImplicit(&inst, PrefixAddrSize)
+
+	case MOV:
+		// The 16-bit and 32-bit forms of MOV Sreg, dst and MOV src, Sreg
+		// cannot be distinguished when src or dst refers to memory, because
+		// Sreg is always a 16-bit value, even when we're doing a 32-bit
+		// instruction. Because the instruction tables distinguished these two,
+		// any operand size prefix has been marked as used (to decide which
+		// branch to take). Unmark it, so that it will show up in disassembly,
+		// so that the reader can tell the size of memory operand.
+		// up with the same arguments
+		dst, _ := inst.Args[0].(Reg)
+		src, _ := inst.Args[1].(Reg)
+		if ES <= src && src <= GS && isMem(inst.Args[0]) || ES <= dst && dst <= GS && isMem(inst.Args[1]) {
+			unmarkImplicit(&inst, PrefixDataSize)
+		}
+
+	case MOVDQU:
+		if countPrefix(&inst, 0xF3) > 1 {
+			unmarkImplicit(&inst, 0xF3)
+			markLastImplicit(&inst, 0xF3)
+		}
+
+	case MOVQ2DQ:
+		markLastImplicit(&inst, PrefixDataSize)
+
+	case SLDT, SMSW, STR, FXRSTOR, XRSTOR, XSAVE, XSAVEOPT, CMPXCHG8B:
+		if isMem(inst.Args[0]) {
+			unmarkImplicit(&inst, PrefixDataSize)
+		}
+
+	case SYSEXIT:
+		unmarkImplicit(&inst, PrefixDataSize)
+	}
+
+	if isCondJmp[inst.Op] || isLoop[inst.Op] || inst.Op == JCXZ || inst.Op == JECXZ || inst.Op == JRCXZ {
+		if countPrefix(&inst, PrefixCS) > 0 && countPrefix(&inst, PrefixDS) > 0 {
+			for i, p := range inst.Prefix {
+				switch p & 0xFFF {
+				case PrefixPN, PrefixPT:
+					inst.Prefix[i] &= 0xF0FF // cut interpretation bits, producing original segment prefix
+				}
+			}
+		}
+	}
+
+	// XACQUIRE/XRELEASE adjustment.
+	if inst.Op == MOV {
+		// MOV into memory is a candidate for turning REP into XRELEASE.
+		// However, if the REP is followed by a REPN, that REPN blocks the
+		// conversion.
+		haveREPN := false
+		for i := len(inst.Prefix) - 1; i >= 0; i-- {
+			switch inst.Prefix[i] &^ PrefixIgnored {
+			case PrefixREPN:
+				haveREPN = true
+			case PrefixXRELEASE:
+				if haveREPN {
+					inst.Prefix[i] = PrefixREP
+				}
+			}
+		}
+	}
+
+	// We only format the final F2/F3 as XRELEASE/XACQUIRE.
+	haveXA := false
+	haveXR := false
+	for i := len(inst.Prefix) - 1; i >= 0; i-- {
+		switch inst.Prefix[i] &^ PrefixIgnored {
+		case PrefixXRELEASE:
+			if !haveXR {
+				haveXR = true
+			} else {
+				inst.Prefix[i] = PrefixREP
+			}
+
+		case PrefixXACQUIRE:
+			if !haveXA {
+				haveXA = true
+			} else {
+				inst.Prefix[i] = PrefixREPN
+			}
+		}
+	}
+
+	// Determine opcode.
+	op := strings.ToLower(inst.Op.String())
+	if alt := gnuOp[inst.Op]; alt != "" {
+		op = alt
+	}
+
+	// Determine opcode suffix.
+	// Libopcodes omits the suffix if the width of the operation
+	// can be inferred from a register arguments. For example,
+	// add $1, %ebx has no suffix because you can tell from the
+	// 32-bit register destination that it is a 32-bit add,
+	// but in addl $1, (%ebx), the destination is memory, so the
+	// size is not evident without the l suffix.
+	needSuffix := true
+SuffixLoop:
+	for i, a := range inst.Args {
+		if a == nil {
+			break
+		}
+		switch a := a.(type) {
+		case Reg:
+			switch inst.Op {
+			case MOVSX, MOVZX:
+				continue
+
+			case SHL, SHR, RCL, RCR, ROL, ROR, SAR:
+				if i == 1 {
+					// shift count does not tell us operand size
+					continue
+				}
+
+			case CRC32:
+				// The source argument does tell us operand size,
+				// but libopcodes still always puts a suffix on crc32.
+				continue
+
+			case PUSH, POP:
+				// Even though segment registers are 16-bit, push and pop
+				// can save/restore them from 32-bit slots, so they
+				// do not imply operand size.
+				if ES <= a && a <= GS {
+					continue
+				}
+
+			case CVTSI2SD, CVTSI2SS:
+				// The integer register argument takes priority.
+				if X0 <= a && a <= X15 {
+					continue
+				}
+			}
+
+			if AL <= a && a <= R15 || ES <= a && a <= GS || X0 <= a && a <= X15 || M0 <= a && a <= M7 {
+				needSuffix = false
+				break SuffixLoop
+			}
+		}
+	}
+
+	if needSuffix {
+		switch inst.Op {
+		case CMPXCHG8B, FLDCW, FNSTCW, FNSTSW, LDMXCSR, LLDT, LMSW, LTR, PCLMULQDQ,
+			SETA, SETAE, SETB, SETBE, SETE, SETG, SETGE, SETL, SETLE, SETNE, SETNO, SETNP, SETNS, SETO, SETP, SETS,
+			SLDT, SMSW, STMXCSR, STR, VERR, VERW:
+			// For various reasons, libopcodes emits no suffix for these instructions.
+
+		case CRC32:
+			op += byteSizeSuffix(argBytes(&inst, inst.Args[1]))
+
+		case LGDT, LIDT, SGDT, SIDT:
+			op += byteSizeSuffix(inst.DataSize / 8)
+
+		case MOVZX, MOVSX:
+			// Integer size conversions get two suffixes.
+			op = op[:4] + byteSizeSuffix(argBytes(&inst, inst.Args[1])) + byteSizeSuffix(argBytes(&inst, inst.Args[0]))
+
+		case LOOP, LOOPE, LOOPNE:
+			// Add w suffix to indicate use of CX register instead of ECX.
+			if inst.AddrSize == 16 {
+				op += "w"
+			}
+
+		case CALL, ENTER, JMP, LCALL, LEAVE, LJMP, LRET, RET, SYSRET, XBEGIN:
+			// Add w suffix to indicate use of 16-bit target.
+			// Exclude JMP rel8.
+			if inst.Opcode>>24 == 0xEB {
+				break
+			}
+			if inst.DataSize == 16 && inst.Mode != 16 {
+				markLastImplicit(&inst, PrefixDataSize)
+				op += "w"
+			} else if inst.Mode == 64 {
+				op += "q"
+			}
+
+		case FRSTOR, FNSAVE, FNSTENV, FLDENV:
+			// Add s suffix to indicate shortened FPU state (I guess).
+			if inst.DataSize == 16 {
+				op += "s"
+			}
+
+		case PUSH, POP:
+			if markLastImplicit(&inst, PrefixDataSize) {
+				op += byteSizeSuffix(inst.DataSize / 8)
+			} else if inst.Mode == 64 {
+				op += "q"
+			} else {
+				op += byteSizeSuffix(inst.MemBytes)
+			}
+
+		default:
+			if isFloat(inst.Op) {
+				// I can't explain any of this, but it's what libopcodes does.
+				switch inst.MemBytes {
+				default:
+					if (inst.Op == FLD || inst.Op == FSTP) && isMem(inst.Args[0]) {
+						op += "t"
+					}
+				case 4:
+					if isFloatInt(inst.Op) {
+						op += "l"
+					} else {
+						op += "s"
+					}
+				case 8:
+					if isFloatInt(inst.Op) {
+						op += "ll"
+					} else {
+						op += "l"
+					}
+				}
+				break
+			}
+
+			op += byteSizeSuffix(inst.MemBytes)
+		}
+	}
+
+	// Adjust special case opcodes.
+	switch inst.Op {
+	case 0:
+		if inst.Prefix[0] != 0 {
+			return strings.ToLower(inst.Prefix[0].String())
+		}
+
+	case INT:
+		if inst.Opcode>>24 == 0xCC {
+			inst.Args[0] = nil
+			op = "int3"
+		}
+
+	case CMPPS, CMPPD, CMPSD_XMM, CMPSS:
+		imm, ok := inst.Args[2].(Imm)
+		if ok && 0 <= imm && imm < 8 {
+			inst.Args[2] = nil
+			op = cmppsOps[imm] + op[3:]
+		}
+
+	case PCLMULQDQ:
+		imm, ok := inst.Args[2].(Imm)
+		if ok && imm&^0x11 == 0 {
+			inst.Args[2] = nil
+			op = pclmulqOps[(imm&0x10)>>3|(imm&1)]
+		}
+
+	case XLATB:
+		if markLastImplicit(&inst, PrefixAddrSize) {
+			op = "xlat" // not xlatb
+		}
+	}
+
+	// Build list of argument strings.
+	var (
+		usedPrefixes bool     // segment prefixes consumed by Mem formatting
+		args         []string // formatted arguments
+	)
+	for i, a := range inst.Args {
+		if a == nil {
+			break
+		}
+		switch inst.Op {
+		case MOVSB, MOVSW, MOVSD, MOVSQ, OUTSB, OUTSW, OUTSD:
+			if i == 0 {
+				usedPrefixes = true // disable use of prefixes for first argument
+			} else {
+				usedPrefixes = false
+			}
+		}
+		if a == Imm(1) && (inst.Opcode>>24)&^1 == 0xD0 {
+			continue
+		}
+		args = append(args, gnuArg(&inst, pc, symname, a, &usedPrefixes))
+	}
+
+	// The default is to print the arguments in reverse Intel order.
+	// A few instructions inhibit this behavior.
+	switch inst.Op {
+	case BOUND, LCALL, ENTER, LJMP:
+		// no reverse
+	default:
+		// reverse args
+		for i, j := 0, len(args)-1; i < j; i, j = i+1, j-1 {
+			args[i], args[j] = args[j], args[i]
+		}
+	}
+
+	// Build prefix string.
+	// Must be after argument formatting, which can turn off segment prefixes.
+	var (
+		prefix       = "" // output string
+		numAddr      = 0
+		numData      = 0
+		implicitData = false
+	)
+	for _, p := range inst.Prefix {
+		if p&0xFF == PrefixDataSize && p&PrefixImplicit != 0 {
+			implicitData = true
+		}
+	}
+	for _, p := range inst.Prefix {
+		if p == 0 || p.IsVEX() {
+			break
+		}
+		if p&PrefixImplicit != 0 {
+			continue
+		}
+		switch p &^ (PrefixIgnored | PrefixInvalid) {
+		default:
+			if p.IsREX() {
+				if p&0xFF == PrefixREX {
+					prefix += "rex "
+				} else {
+					prefix += "rex." + p.String()[4:] + " "
+				}
+				break
+			}
+			prefix += strings.ToLower(p.String()) + " "
+
+		case PrefixPN:
+			op += ",pn"
+			continue
+
+		case PrefixPT:
+			op += ",pt"
+			continue
+
+		case PrefixAddrSize, PrefixAddr16, PrefixAddr32:
+			// For unknown reasons, if the addr16 prefix is repeated,
+			// libopcodes displays all but the last as addr32, even though
+			// the addressing form used in a memory reference is clearly
+			// still 16-bit.
+			n := 32
+			if inst.Mode == 32 {
+				n = 16
+			}
+			numAddr++
+			if countPrefix(&inst, PrefixAddrSize) > numAddr {
+				n = inst.Mode
+			}
+			prefix += fmt.Sprintf("addr%d ", n)
+			continue
+
+		case PrefixData16, PrefixData32:
+			if implicitData && countPrefix(&inst, PrefixDataSize) > 1 {
+				// Similar to the addr32 logic above, but it only kicks in
+				// when something used the data size prefix (one is implicit).
+				n := 16
+				if inst.Mode == 16 {
+					n = 32
+				}
+				numData++
+				if countPrefix(&inst, PrefixDataSize) > numData {
+					if inst.Mode == 16 {
+						n = 16
+					} else {
+						n = 32
+					}
+				}
+				prefix += fmt.Sprintf("data%d ", n)
+				continue
+			}
+			prefix += strings.ToLower(p.String()) + " "
+		}
+	}
+
+	// Finally! Put it all together.
+	text := prefix + op
+	if args != nil {
+		text += " "
+		// Indirect call/jmp gets a star to distinguish from direct jump address.
+		if (inst.Op == CALL || inst.Op == JMP || inst.Op == LJMP || inst.Op == LCALL) && (isMem(inst.Args[0]) || isReg(inst.Args[0])) {
+			text += "*"
+		}
+		text += strings.Join(args, ",")
+	}
+	return text
+}
+
+// gnuArg returns the GNU syntax for the argument x from the instruction inst.
+// If *usedPrefixes is false and x is a Mem, then the formatting
+// includes any segment prefixes and sets *usedPrefixes to true.
+func gnuArg(inst *Inst, pc uint64, symname SymLookup, x Arg, usedPrefixes *bool) string {
+	if x == nil {
+		return "<nil>"
+	}
+	switch x := x.(type) {
+	case Reg:
+		switch inst.Op {
+		case CVTSI2SS, CVTSI2SD, CVTSS2SI, CVTSD2SI, CVTTSD2SI, CVTTSS2SI:
+			if inst.DataSize == 16 && EAX <= x && x <= R15L {
+				x -= EAX - AX
+			}
+
+		case IN, INSB, INSW, INSD, OUT, OUTSB, OUTSW, OUTSD:
+			// DX is the port, but libopcodes prints it as if it were a memory reference.
+			if x == DX {
+				return "(%dx)"
+			}
+		case VMOVDQA, VMOVDQU, VMOVNTDQA, VMOVNTDQ:
+			return strings.Replace(gccRegName[x], "xmm", "ymm", -1)
+		}
+		return gccRegName[x]
+	case Mem:
+		if s, disp := memArgToSymbol(x, pc, inst.Len, symname); s != "" {
+			suffix := ""
+			if disp != 0 {
+				suffix = fmt.Sprintf("%+d", disp)
+			}
+			return fmt.Sprintf("%s%s", s, suffix)
+		}
+		seg := ""
+		var haveCS, haveDS, haveES, haveFS, haveGS, haveSS bool
+		switch x.Segment {
+		case CS:
+			haveCS = true
+		case DS:
+			haveDS = true
+		case ES:
+			haveES = true
+		case FS:
+			haveFS = true
+		case GS:
+			haveGS = true
+		case SS:
+			haveSS = true
+		}
+		switch inst.Op {
+		case INSB, INSW, INSD, STOSB, STOSW, STOSD, STOSQ, SCASB, SCASW, SCASD, SCASQ:
+			// These do not accept segment prefixes, at least in the GNU rendering.
+		default:
+			if *usedPrefixes {
+				break
+			}
+			for i := len(inst.Prefix) - 1; i >= 0; i-- {
+				p := inst.Prefix[i] &^ PrefixIgnored
+				if p == 0 {
+					continue
+				}
+				switch p {
+				case PrefixCS:
+					if !haveCS {
+						haveCS = true
+						inst.Prefix[i] |= PrefixImplicit
+					}
+				case PrefixDS:
+					if !haveDS {
+						haveDS = true
+						inst.Prefix[i] |= PrefixImplicit
+					}
+				case PrefixES:
+					if !haveES {
+						haveES = true
+						inst.Prefix[i] |= PrefixImplicit
+					}
+				case PrefixFS:
+					if !haveFS {
+						haveFS = true
+						inst.Prefix[i] |= PrefixImplicit
+					}
+				case PrefixGS:
+					if !haveGS {
+						haveGS = true
+						inst.Prefix[i] |= PrefixImplicit
+					}
+				case PrefixSS:
+					if !haveSS {
+						haveSS = true
+						inst.Prefix[i] |= PrefixImplicit
+					}
+				}
+			}
+			*usedPrefixes = true
+		}
+		if haveCS {
+			seg += "%cs:"
+		}
+		if haveDS {
+			seg += "%ds:"
+		}
+		if haveSS {
+			seg += "%ss:"
+		}
+		if haveES {
+			seg += "%es:"
+		}
+		if haveFS {
+			seg += "%fs:"
+		}
+		if haveGS {
+			seg += "%gs:"
+		}
+		disp := ""
+		if x.Disp != 0 {
+			disp = fmt.Sprintf("%#x", x.Disp)
+		}
+		if x.Scale == 0 || x.Index == 0 && x.Scale == 1 && (x.Base == ESP || x.Base == RSP || x.Base == 0 && inst.Mode == 64) {
+			if x.Base == 0 {
+				return seg + disp
+			}
+			return fmt.Sprintf("%s%s(%s)", seg, disp, gccRegName[x.Base])
+		}
+		base := gccRegName[x.Base]
+		if x.Base == 0 {
+			base = ""
+		}
+		index := gccRegName[x.Index]
+		if x.Index == 0 {
+			if inst.AddrSize == 64 {
+				index = "%riz"
+			} else {
+				index = "%eiz"
+			}
+		}
+		if AX <= x.Base && x.Base <= DI {
+			// 16-bit addressing - no scale
+			return fmt.Sprintf("%s%s(%s,%s)", seg, disp, base, index)
+		}
+		return fmt.Sprintf("%s%s(%s,%s,%d)", seg, disp, base, index, x.Scale)
+	case Rel:
+		if pc == 0 {
+			return fmt.Sprintf(".%+#x", int64(x))
+		} else {
+			addr := pc + uint64(inst.Len) + uint64(x)
+			if s, base := symname(addr); s != "" && addr == base {
+				return fmt.Sprintf("%s", s)
+			} else {
+				addr := pc + uint64(inst.Len) + uint64(x)
+				return fmt.Sprintf("%#x", addr)
+			}
+		}
+	case Imm:
+		if s, base := symname(uint64(x)); s != "" {
+			suffix := ""
+			if uint64(x) != base {
+				suffix = fmt.Sprintf("%+d", uint64(x)-base)
+			}
+			return fmt.Sprintf("$%s%s", s, suffix)
+		}
+		if inst.Mode == 32 {
+			return fmt.Sprintf("$%#x", uint32(x))
+		}
+		return fmt.Sprintf("$%#x", int64(x))
+	}
+	return x.String()
+}
+
+var gccRegName = [...]string{
+	0:    "REG0",
+	AL:   "%al",
+	CL:   "%cl",
+	BL:   "%bl",
+	DL:   "%dl",
+	AH:   "%ah",
+	CH:   "%ch",
+	BH:   "%bh",
+	DH:   "%dh",
+	SPB:  "%spl",
+	BPB:  "%bpl",
+	SIB:  "%sil",
+	DIB:  "%dil",
+	R8B:  "%r8b",
+	R9B:  "%r9b",
+	R10B: "%r10b",
+	R11B: "%r11b",
+	R12B: "%r12b",
+	R13B: "%r13b",
+	R14B: "%r14b",
+	R15B: "%r15b",
+	AX:   "%ax",
+	CX:   "%cx",
+	BX:   "%bx",
+	DX:   "%dx",
+	SP:   "%sp",
+	BP:   "%bp",
+	SI:   "%si",
+	DI:   "%di",
+	R8W:  "%r8w",
+	R9W:  "%r9w",
+	R10W: "%r10w",
+	R11W: "%r11w",
+	R12W: "%r12w",
+	R13W: "%r13w",
+	R14W: "%r14w",
+	R15W: "%r15w",
+	EAX:  "%eax",
+	ECX:  "%ecx",
+	EDX:  "%edx",
+	EBX:  "%ebx",
+	ESP:  "%esp",
+	EBP:  "%ebp",
+	ESI:  "%esi",
+	EDI:  "%edi",
+	R8L:  "%r8d",
+	R9L:  "%r9d",
+	R10L: "%r10d",
+	R11L: "%r11d",
+	R12L: "%r12d",
+	R13L: "%r13d",
+	R14L: "%r14d",
+	R15L: "%r15d",
+	RAX:  "%rax",
+	RCX:  "%rcx",
+	RDX:  "%rdx",
+	RBX:  "%rbx",
+	RSP:  "%rsp",
+	RBP:  "%rbp",
+	RSI:  "%rsi",
+	RDI:  "%rdi",
+	R8:   "%r8",
+	R9:   "%r9",
+	R10:  "%r10",
+	R11:  "%r11",
+	R12:  "%r12",
+	R13:  "%r13",
+	R14:  "%r14",
+	R15:  "%r15",
+	IP:   "%ip",
+	EIP:  "%eip",
+	RIP:  "%rip",
+	F0:   "%st",
+	F1:   "%st(1)",
+	F2:   "%st(2)",
+	F3:   "%st(3)",
+	F4:   "%st(4)",
+	F5:   "%st(5)",
+	F6:   "%st(6)",
+	F7:   "%st(7)",
+	M0:   "%mm0",
+	M1:   "%mm1",
+	M2:   "%mm2",
+	M3:   "%mm3",
+	M4:   "%mm4",
+	M5:   "%mm5",
+	M6:   "%mm6",
+	M7:   "%mm7",
+	X0:   "%xmm0",
+	X1:   "%xmm1",
+	X2:   "%xmm2",
+	X3:   "%xmm3",
+	X4:   "%xmm4",
+	X5:   "%xmm5",
+	X6:   "%xmm6",
+	X7:   "%xmm7",
+	X8:   "%xmm8",
+	X9:   "%xmm9",
+	X10:  "%xmm10",
+	X11:  "%xmm11",
+	X12:  "%xmm12",
+	X13:  "%xmm13",
+	X14:  "%xmm14",
+	X15:  "%xmm15",
+	CS:   "%cs",
+	SS:   "%ss",
+	DS:   "%ds",
+	ES:   "%es",
+	FS:   "%fs",
+	GS:   "%gs",
+	GDTR: "%gdtr",
+	IDTR: "%idtr",
+	LDTR: "%ldtr",
+	MSW:  "%msw",
+	TASK: "%task",
+	CR0:  "%cr0",
+	CR1:  "%cr1",
+	CR2:  "%cr2",
+	CR3:  "%cr3",
+	CR4:  "%cr4",
+	CR5:  "%cr5",
+	CR6:  "%cr6",
+	CR7:  "%cr7",
+	CR8:  "%cr8",
+	CR9:  "%cr9",
+	CR10: "%cr10",
+	CR11: "%cr11",
+	CR12: "%cr12",
+	CR13: "%cr13",
+	CR14: "%cr14",
+	CR15: "%cr15",
+	DR0:  "%db0",
+	DR1:  "%db1",
+	DR2:  "%db2",
+	DR3:  "%db3",
+	DR4:  "%db4",
+	DR5:  "%db5",
+	DR6:  "%db6",
+	DR7:  "%db7",
+	TR0:  "%tr0",
+	TR1:  "%tr1",
+	TR2:  "%tr2",
+	TR3:  "%tr3",
+	TR4:  "%tr4",
+	TR5:  "%tr5",
+	TR6:  "%tr6",
+	TR7:  "%tr7",
+}
+
+var gnuOp = map[Op]string{
+	CBW:       "cbtw",
+	CDQ:       "cltd",
+	CMPSD:     "cmpsl",
+	CMPSD_XMM: "cmpsd",
+	CWD:       "cwtd",
+	CWDE:      "cwtl",
+	CQO:       "cqto",
+	INSD:      "insl",
+	IRET:      "iretw",
+	IRETD:     "iret",
+	IRETQ:     "iretq",
+	LODSB:     "lods",
+	LODSD:     "lods",
+	LODSQ:     "lods",
+	LODSW:     "lods",
+	MOVSD:     "movsl",
+	MOVSD_XMM: "movsd",
+	OUTSD:     "outsl",
+	POPA:      "popaw",
+	POPAD:     "popa",
+	POPF:      "popfw",
+	POPFD:     "popf",
+	PUSHA:     "pushaw",
+	PUSHAD:    "pusha",
+	PUSHF:     "pushfw",
+	PUSHFD:    "pushf",
+	SCASB:     "scas",
+	SCASD:     "scas",
+	SCASQ:     "scas",
+	SCASW:     "scas",
+	STOSB:     "stos",
+	STOSD:     "stos",
+	STOSQ:     "stos",
+	STOSW:     "stos",
+	XLATB:     "xlat",
+}
+
+var cmppsOps = []string{
+	"cmpeq",
+	"cmplt",
+	"cmple",
+	"cmpunord",
+	"cmpneq",
+	"cmpnlt",
+	"cmpnle",
+	"cmpord",
+}
+
+var pclmulqOps = []string{
+	"pclmullqlqdq",
+	"pclmulhqlqdq",
+	"pclmullqhqdq",
+	"pclmulhqhqdq",
+}
+
+func countPrefix(inst *Inst, target Prefix) int {
+	n := 0
+	for _, p := range inst.Prefix {
+		if p&0xFF == target&0xFF {
+			n++
+		}
+	}
+	return n
+}
+
+func markLastImplicit(inst *Inst, prefix Prefix) bool {
+	for i := len(inst.Prefix) - 1; i >= 0; i-- {
+		p := inst.Prefix[i]
+		if p&0xFF == prefix {
+			inst.Prefix[i] |= PrefixImplicit
+			return true
+		}
+	}
+	return false
+}
+
+func unmarkImplicit(inst *Inst, prefix Prefix) {
+	for i := len(inst.Prefix) - 1; i >= 0; i-- {
+		p := inst.Prefix[i]
+		if p&0xFF == prefix {
+			inst.Prefix[i] &^= PrefixImplicit
+		}
+	}
+}
+
+func byteSizeSuffix(b int) string {
+	switch b {
+	case 1:
+		return "b"
+	case 2:
+		return "w"
+	case 4:
+		return "l"
+	case 8:
+		return "q"
+	}
+	return ""
+}
+
+func argBytes(inst *Inst, arg Arg) int {
+	if isMem(arg) {
+		return inst.MemBytes
+	}
+	return regBytes(arg)
+}
+
+func isFloat(op Op) bool {
+	switch op {
+	case FADD, FCOM, FCOMP, FDIV, FDIVR, FIADD, FICOM, FICOMP, FIDIV, FIDIVR, FILD, FIMUL, FIST, FISTP, FISTTP, FISUB, FISUBR, FLD, FMUL, FST, FSTP, FSUB, FSUBR:
+		return true
+	}
+	return false
+}
+
+func isFloatInt(op Op) bool {
+	switch op {
+	case FIADD, FICOM, FICOMP, FIDIV, FIDIVR, FILD, FIMUL, FIST, FISTP, FISTTP, FISUB, FISUBR:
+		return true
+	}
+	return false
+}

vendor/golang.org/x/arch/x86/x86asm/inst.go

@@ -0,0 +1,649 @@
+// Copyright 2014 The Go Authors.  All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package x86asm implements decoding of x86 machine code.
+package x86asm
+
+import (
+	"bytes"
+	"fmt"
+)
+
+// An Inst is a single instruction.
+type Inst struct {
+	Prefix   Prefixes // Prefixes applied to the instruction.
+	Op       Op       // Opcode mnemonic
+	Opcode   uint32   // Encoded opcode bits, left aligned (first byte is Opcode>>24, etc)
+	Args     Args     // Instruction arguments, in Intel order
+	Mode     int      // processor mode in bits: 16, 32, or 64
+	AddrSize int      // address size in bits: 16, 32, or 64
+	DataSize int      // operand size in bits: 16, 32, or 64
+	MemBytes int      // size of memory argument in bytes: 1, 2, 4, 8, 16, and so on.
+	Len      int      // length of encoded instruction in bytes
+	PCRel    int      // length of PC-relative address in instruction encoding
+	PCRelOff int      // index of start of PC-relative address in instruction encoding
+}
+
+// Prefixes is an array of prefixes associated with a single instruction.
+// The prefixes are listed in the same order as found in the instruction:
+// each prefix byte corresponds to one slot in the array. The first zero
+// in the array marks the end of the prefixes.
+type Prefixes [14]Prefix
+
+// A Prefix represents an Intel instruction prefix.
+// The low 8 bits are the actual prefix byte encoding,
+// and the top 8 bits contain distinguishing bits and metadata.
+type Prefix uint16
+
+const (
+	// Metadata about the role of a prefix in an instruction.
+	PrefixImplicit Prefix = 0x8000 // prefix is implied by instruction text
+	PrefixIgnored  Prefix = 0x4000 // prefix is ignored: either irrelevant or overridden by a later prefix
+	PrefixInvalid  Prefix = 0x2000 // prefix makes entire instruction invalid (bad LOCK)
+
+	// Memory segment overrides.
+	PrefixES Prefix = 0x26 // ES segment override
+	PrefixCS Prefix = 0x2E // CS segment override
+	PrefixSS Prefix = 0x36 // SS segment override
+	PrefixDS Prefix = 0x3E // DS segment override
+	PrefixFS Prefix = 0x64 // FS segment override
+	PrefixGS Prefix = 0x65 // GS segment override
+
+	// Branch prediction.
+	PrefixPN Prefix = 0x12E // predict not taken (conditional branch only)
+	PrefixPT Prefix = 0x13E // predict taken (conditional branch only)
+
+	// Size attributes.
+	PrefixDataSize Prefix = 0x66 // operand size override
+	PrefixData16   Prefix = 0x166
+	PrefixData32   Prefix = 0x266
+	PrefixAddrSize Prefix = 0x67 // address size override
+	PrefixAddr16   Prefix = 0x167
+	PrefixAddr32   Prefix = 0x267
+
+	// One of a kind.
+	PrefixLOCK     Prefix = 0xF0 // lock
+	PrefixREPN     Prefix = 0xF2 // repeat not zero
+	PrefixXACQUIRE Prefix = 0x1F2
+	PrefixBND      Prefix = 0x2F2
+	PrefixREP      Prefix = 0xF3 // repeat
+	PrefixXRELEASE Prefix = 0x1F3
+
+	// The REX prefixes must be in the range [PrefixREX, PrefixREX+0x10).
+	// the other bits are set or not according to the intended use.
+	PrefixREX       Prefix = 0x40 // REX 64-bit extension prefix
+	PrefixREXW      Prefix = 0x08 // extension bit W (64-bit instruction width)
+	PrefixREXR      Prefix = 0x04 // extension bit R (r field in modrm)
+	PrefixREXX      Prefix = 0x02 // extension bit X (index field in sib)
+	PrefixREXB      Prefix = 0x01 // extension bit B (r/m field in modrm or base field in sib)
+	PrefixVEX2Bytes Prefix = 0xC5 // Short form of vex prefix
+	PrefixVEX3Bytes Prefix = 0xC4 // Long form of vex prefix
+)
+
+// IsREX reports whether p is a REX prefix byte.
+func (p Prefix) IsREX() bool {
+	return p&0xF0 == PrefixREX
+}
+
+func (p Prefix) IsVEX() bool {
+	return p&0xFF == PrefixVEX2Bytes || p&0xFF == PrefixVEX3Bytes
+}
+
+func (p Prefix) String() string {
+	p &^= PrefixImplicit | PrefixIgnored | PrefixInvalid
+	if s := prefixNames[p]; s != "" {
+		return s
+	}
+
+	if p.IsREX() {
+		s := "REX."
+		if p&PrefixREXW != 0 {
+			s += "W"
+		}
+		if p&PrefixREXR != 0 {
+			s += "R"
+		}
+		if p&PrefixREXX != 0 {
+			s += "X"
+		}
+		if p&PrefixREXB != 0 {
+			s += "B"
+		}
+		return s
+	}
+
+	return fmt.Sprintf("Prefix(%#x)", int(p))
+}
+
+// An Op is an x86 opcode.
+type Op uint32
+
+func (op Op) String() string {
+	i := int(op)
+	if i < 0 || i >= len(opNames) || opNames[i] == "" {
+		return fmt.Sprintf("Op(%d)", i)
+	}
+	return opNames[i]
+}
+
+// An Args holds the instruction arguments.
+// If an instruction has fewer than 4 arguments,
+// the final elements in the array are nil.
+type Args [4]Arg
+
+// An Arg is a single instruction argument,
+// one of these types: Reg, Mem, Imm, Rel.
+type Arg interface {
+	String() string
+	isArg()
+}
+
+// Note that the implements of Arg that follow are all sized
+// so that on a 64-bit machine the data can be inlined in
+// the interface value instead of requiring an allocation.
+
+// A Reg is a single register.
+// The zero Reg value has no name but indicates ``no register.''
+type Reg uint8
+
+const (
+	_ Reg = iota
+
+	// 8-bit
+	AL
+	CL
+	DL
+	BL
+	AH
+	CH
+	DH
+	BH
+	SPB
+	BPB
+	SIB
+	DIB
+	R8B
+	R9B
+	R10B
+	R11B
+	R12B
+	R13B
+	R14B
+	R15B
+
+	// 16-bit
+	AX
+	CX
+	DX
+	BX
+	SP
+	BP
+	SI
+	DI
+	R8W
+	R9W
+	R10W
+	R11W
+	R12W
+	R13W
+	R14W
+	R15W
+
+	// 32-bit
+	EAX
+	ECX
+	EDX
+	EBX
+	ESP
+	EBP
+	ESI
+	EDI
+	R8L
+	R9L
+	R10L
+	R11L
+	R12L
+	R13L
+	R14L
+	R15L
+
+	// 64-bit
+	RAX
+	RCX
+	RDX
+	RBX
+	RSP
+	RBP
+	RSI
+	RDI
+	R8
+	R9
+	R10
+	R11
+	R12
+	R13
+	R14
+	R15
+
+	// Instruction pointer.
+	IP  // 16-bit
+	EIP // 32-bit
+	RIP // 64-bit
+
+	// 387 floating point registers.
+	F0
+	F1
+	F2
+	F3
+	F4
+	F5
+	F6
+	F7
+
+	// MMX registers.
+	M0
+	M1
+	M2
+	M3
+	M4
+	M5
+	M6
+	M7
+
+	// XMM registers.
+	X0
+	X1
+	X2
+	X3
+	X4
+	X5
+	X6
+	X7
+	X8
+	X9
+	X10
+	X11
+	X12
+	X13
+	X14
+	X15
+
+	// Segment registers.
+	ES
+	CS
+	SS
+	DS
+	FS
+	GS
+
+	// System registers.
+	GDTR
+	IDTR
+	LDTR
+	MSW
+	TASK
+
+	// Control registers.
+	CR0
+	CR1
+	CR2
+	CR3
+	CR4
+	CR5
+	CR6
+	CR7
+	CR8
+	CR9
+	CR10
+	CR11
+	CR12
+	CR13
+	CR14
+	CR15
+
+	// Debug registers.
+	DR0
+	DR1
+	DR2
+	DR3
+	DR4
+	DR5
+	DR6
+	DR7
+	DR8
+	DR9
+	DR10
+	DR11
+	DR12
+	DR13
+	DR14
+	DR15
+
+	// Task registers.
+	TR0
+	TR1
+	TR2
+	TR3
+	TR4
+	TR5
+	TR6
+	TR7
+)
+
+const regMax = TR7
+
+func (Reg) isArg() {}
+
+func (r Reg) String() string {
+	i := int(r)
+	if i < 0 || i >= len(regNames) || regNames[i] == "" {
+		return fmt.Sprintf("Reg(%d)", i)
+	}
+	return regNames[i]
+}
+
+// A Mem is a memory reference.
+// The general form is Segment:[Base+Scale*Index+Disp].
+type Mem struct {
+	Segment Reg
+	Base    Reg
+	Scale   uint8
+	Index   Reg
+	Disp    int64
+}
+
+func (Mem) isArg() {}
+
+func (m Mem) String() string {
+	var base, plus, scale, index, disp string
+
+	if m.Base != 0 {
+		base = m.Base.String()
+	}
+	if m.Scale != 0 {
+		if m.Base != 0 {
+			plus = "+"
+		}
+		if m.Scale > 1 {
+			scale = fmt.Sprintf("%d*", m.Scale)
+		}
+		index = m.Index.String()
+	}
+	if m.Disp != 0 || m.Base == 0 && m.Scale == 0 {
+		disp = fmt.Sprintf("%+#x", m.Disp)
+	}
+	return "[" + base + plus + scale + index + disp + "]"
+}
+
+// A Rel is an offset relative to the current instruction pointer.
+type Rel int32
+
+func (Rel) isArg() {}
+
+func (r Rel) String() string {
+	return fmt.Sprintf(".%+d", r)
+}
+
+// An Imm is an integer constant.
+type Imm int64
+
+func (Imm) isArg() {}
+
+func (i Imm) String() string {
+	return fmt.Sprintf("%#x", int64(i))
+}
+
+func (i Inst) String() string {
+	var buf bytes.Buffer
+	for _, p := range i.Prefix {
+		if p == 0 {
+			break
+		}
+		if p&PrefixImplicit != 0 {
+			continue
+		}
+		fmt.Fprintf(&buf, "%v ", p)
+	}
+	fmt.Fprintf(&buf, "%v", i.Op)
+	sep := " "
+	for _, v := range i.Args {
+		if v == nil {
+			break
+		}
+		fmt.Fprintf(&buf, "%s%v", sep, v)
+		sep = ", "
+	}
+	return buf.String()
+}
+
+func isReg(a Arg) bool {
+	_, ok := a.(Reg)
+	return ok
+}
+
+func isSegReg(a Arg) bool {
+	r, ok := a.(Reg)
+	return ok && ES <= r && r <= GS
+}
+
+func isMem(a Arg) bool {
+	_, ok := a.(Mem)
+	return ok
+}
+
+func isImm(a Arg) bool {
+	_, ok := a.(Imm)
+	return ok
+}
+
+func regBytes(a Arg) int {
+	r, ok := a.(Reg)
+	if !ok {
+		return 0
+	}
+	if AL <= r && r <= R15B {
+		return 1
+	}
+	if AX <= r && r <= R15W {
+		return 2
+	}
+	if EAX <= r && r <= R15L {
+		return 4
+	}
+	if RAX <= r && r <= R15 {
+		return 8
+	}
+	return 0
+}
+
+func isSegment(p Prefix) bool {
+	switch p {
+	case PrefixCS, PrefixDS, PrefixES, PrefixFS, PrefixGS, PrefixSS:
+		return true
+	}
+	return false
+}
+
+// The Op definitions and string list are in tables.go.
+
+var prefixNames = map[Prefix]string{
+	PrefixCS:       "CS",
+	PrefixDS:       "DS",
+	PrefixES:       "ES",
+	PrefixFS:       "FS",
+	PrefixGS:       "GS",
+	PrefixSS:       "SS",
+	PrefixLOCK:     "LOCK",
+	PrefixREP:      "REP",
+	PrefixREPN:     "REPN",
+	PrefixAddrSize: "ADDRSIZE",
+	PrefixDataSize: "DATASIZE",
+	PrefixAddr16:   "ADDR16",
+	PrefixData16:   "DATA16",
+	PrefixAddr32:   "ADDR32",
+	PrefixData32:   "DATA32",
+	PrefixBND:      "BND",
+	PrefixXACQUIRE: "XACQUIRE",
+	PrefixXRELEASE: "XRELEASE",
+	PrefixREX:      "REX",
+	PrefixPT:       "PT",
+	PrefixPN:       "PN",
+}
+
+var regNames = [...]string{
+	AL:   "AL",
+	CL:   "CL",
+	BL:   "BL",
+	DL:   "DL",
+	AH:   "AH",
+	CH:   "CH",
+	BH:   "BH",
+	DH:   "DH",
+	SPB:  "SPB",
+	BPB:  "BPB",
+	SIB:  "SIB",
+	DIB:  "DIB",
+	R8B:  "R8B",
+	R9B:  "R9B",
+	R10B: "R10B",
+	R11B: "R11B",
+	R12B: "R12B",
+	R13B: "R13B",
+	R14B: "R14B",
+	R15B: "R15B",
+	AX:   "AX",
+	CX:   "CX",
+	BX:   "BX",
+	DX:   "DX",
+	SP:   "SP",
+	BP:   "BP",
+	SI:   "SI",
+	DI:   "DI",
+	R8W:  "R8W",
+	R9W:  "R9W",
+	R10W: "R10W",
+	R11W: "R11W",
+	R12W: "R12W",
+	R13W: "R13W",
+	R14W: "R14W",
+	R15W: "R15W",
+	EAX:  "EAX",
+	ECX:  "ECX",
+	EDX:  "EDX",
+	EBX:  "EBX",
+	ESP:  "ESP",
+	EBP:  "EBP",
+	ESI:  "ESI",
+	EDI:  "EDI",
+	R8L:  "R8L",
+	R9L:  "R9L",
+	R10L: "R10L",
+	R11L: "R11L",
+	R12L: "R12L",
+	R13L: "R13L",
+	R14L: "R14L",
+	R15L: "R15L",
+	RAX:  "RAX",
+	RCX:  "RCX",
+	RDX:  "RDX",
+	RBX:  "RBX",
+	RSP:  "RSP",
+	RBP:  "RBP",
+	RSI:  "RSI",
+	RDI:  "RDI",
+	R8:   "R8",
+	R9:   "R9",
+	R10:  "R10",
+	R11:  "R11",
+	R12:  "R12",
+	R13:  "R13",
+	R14:  "R14",
+	R15:  "R15",
+	IP:   "IP",
+	EIP:  "EIP",
+	RIP:  "RIP",
+	F0:   "F0",
+	F1:   "F1",
+	F2:   "F2",
+	F3:   "F3",
+	F4:   "F4",
+	F5:   "F5",
+	F6:   "F6",
+	F7:   "F7",
+	M0:   "M0",
+	M1:   "M1",
+	M2:   "M2",
+	M3:   "M3",
+	M4:   "M4",
+	M5:   "M5",
+	M6:   "M6",
+	M7:   "M7",
+	X0:   "X0",
+	X1:   "X1",
+	X2:   "X2",
+	X3:   "X3",
+	X4:   "X4",
+	X5:   "X5",
+	X6:   "X6",
+	X7:   "X7",
+	X8:   "X8",
+	X9:   "X9",
+	X10:  "X10",
+	X11:  "X11",
+	X12:  "X12",
+	X13:  "X13",
+	X14:  "X14",
+	X15:  "X15",
+	CS:   "CS",
+	SS:   "SS",
+	DS:   "DS",
+	ES:   "ES",
+	FS:   "FS",
+	GS:   "GS",
+	GDTR: "GDTR",
+	IDTR: "IDTR",
+	LDTR: "LDTR",
+	MSW:  "MSW",
+	TASK: "TASK",
+	CR0:  "CR0",
+	CR1:  "CR1",
+	CR2:  "CR2",
+	CR3:  "CR3",
+	CR4:  "CR4",
+	CR5:  "CR5",
+	CR6:  "CR6",
+	CR7:  "CR7",
+	CR8:  "CR8",
+	CR9:  "CR9",
+	CR10: "CR10",
+	CR11: "CR11",
+	CR12: "CR12",
+	CR13: "CR13",
+	CR14: "CR14",
+	CR15: "CR15",
+	DR0:  "DR0",
+	DR1:  "DR1",
+	DR2:  "DR2",
+	DR3:  "DR3",
+	DR4:  "DR4",
+	DR5:  "DR5",
+	DR6:  "DR6",
+	DR7:  "DR7",
+	DR8:  "DR8",
+	DR9:  "DR9",
+	DR10: "DR10",
+	DR11: "DR11",
+	DR12: "DR12",
+	DR13: "DR13",
+	DR14: "DR14",
+	DR15: "DR15",
+	TR0:  "TR0",
+	TR1:  "TR1",
+	TR2:  "TR2",
+	TR3:  "TR3",
+	TR4:  "TR4",
+	TR5:  "TR5",
+	TR6:  "TR6",
+	TR7:  "TR7",
+}

vendor/golang.org/x/arch/x86/x86asm/intel.go

@@ -0,0 +1,560 @@
+// Copyright 2014 The Go Authors.  All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package x86asm
+
+import (
+	"fmt"
+	"strings"
+)
+
+// IntelSyntax returns the Intel assembler syntax for the instruction, as defined by Intel's XED tool.
+func IntelSyntax(inst Inst, pc uint64, symname SymLookup) string {
+	if symname == nil {
+		symname = func(uint64) (string, uint64) { return "", 0 }
+	}
+
+	var iargs []Arg
+	for _, a := range inst.Args {
+		if a == nil {
+			break
+		}
+		iargs = append(iargs, a)
+	}
+
+	switch inst.Op {
+	case INSB, INSD, INSW, OUTSB, OUTSD, OUTSW, LOOPNE, JCXZ, JECXZ, JRCXZ, LOOP, LOOPE, MOV, XLATB:
+		if inst.Op == MOV && (inst.Opcode>>16)&0xFFFC != 0x0F20 {
+			break
+		}
+		for i, p := range inst.Prefix {
+			if p&0xFF == PrefixAddrSize {
+				inst.Prefix[i] &^= PrefixImplicit
+			}
+		}
+	}
+
+	switch inst.Op {
+	case MOV:
+		dst, _ := inst.Args[0].(Reg)
+		src, _ := inst.Args[1].(Reg)
+		if ES <= dst && dst <= GS && EAX <= src && src <= R15L {
+			src -= EAX - AX
+			iargs[1] = src
+		}
+		if ES <= dst && dst <= GS && RAX <= src && src <= R15 {
+			src -= RAX - AX
+			iargs[1] = src
+		}
+
+		if inst.Opcode>>24&^3 == 0xA0 {
+			for i, p := range inst.Prefix {
+				if p&0xFF == PrefixAddrSize {
+					inst.Prefix[i] |= PrefixImplicit
+				}
+			}
+		}
+	}
+
+	switch inst.Op {
+	case AAM, AAD:
+		if imm, ok := iargs[0].(Imm); ok {
+			if inst.DataSize == 32 {
+				iargs[0] = Imm(uint32(int8(imm)))
+			} else if inst.DataSize == 16 {
+				iargs[0] = Imm(uint16(int8(imm)))
+			}
+		}
+
+	case PUSH:
+		if imm, ok := iargs[0].(Imm); ok {
+			iargs[0] = Imm(uint32(imm))
+		}
+	}
+
+	for _, p := range inst.Prefix {
+		if p&PrefixImplicit != 0 {
+			for j, pj := range inst.Prefix {
+				if pj&0xFF == p&0xFF {
+					inst.Prefix[j] |= PrefixImplicit
+				}
+			}
+		}
+	}
+
+	if inst.Op != 0 {
+		for i, p := range inst.Prefix {
+			switch p &^ PrefixIgnored {
+			case PrefixData16, PrefixData32, PrefixCS, PrefixDS, PrefixES, PrefixSS:
+				inst.Prefix[i] |= PrefixImplicit
+			}
+			if p.IsREX() {
+				inst.Prefix[i] |= PrefixImplicit
+			}
+			if p.IsVEX() {
+				if p == PrefixVEX3Bytes {
+					inst.Prefix[i+2] |= PrefixImplicit
+				}
+				inst.Prefix[i] |= PrefixImplicit
+				inst.Prefix[i+1] |= PrefixImplicit
+			}
+		}
+	}
+
+	if isLoop[inst.Op] || inst.Op == JCXZ || inst.Op == JECXZ || inst.Op == JRCXZ {
+		for i, p := range inst.Prefix {
+			if p == PrefixPT || p == PrefixPN {
+				inst.Prefix[i] |= PrefixImplicit
+			}
+		}
+	}
+
+	switch inst.Op {
+	case AAA, AAS, CBW, CDQE, CLC, CLD, CLI, CLTS, CMC, CPUID, CQO, CWD, DAA, DAS,
+		FDECSTP, FINCSTP, FNCLEX, FNINIT, FNOP, FWAIT, HLT,
+		ICEBP, INSB, INSD, INSW, INT, INTO, INVD, IRET, IRETQ,
+		LAHF, LEAVE, LRET, MONITOR, MWAIT, NOP, OUTSB, OUTSD, OUTSW,
+		PAUSE, POPA, POPF, POPFQ, PUSHA, PUSHF, PUSHFQ,
+		RDMSR, RDPMC, RDTSC, RDTSCP, RET, RSM,
+		SAHF, STC, STD, STI, SYSENTER, SYSEXIT, SYSRET,
+		UD2, WBINVD, WRMSR, XEND, XLATB, XTEST:
+
+		if inst.Op == NOP && inst.Opcode>>24 != 0x90 {
+			break
+		}
+		if inst.Op == RET && inst.Opcode>>24 != 0xC3 {
+			break
+		}
+		if inst.Op == INT && inst.Opcode>>24 != 0xCC {
+			break
+		}
+		if inst.Op == LRET && inst.Opcode>>24 != 0xcb {
+			break
+		}
+		for i, p := range inst.Prefix {
+			if p&0xFF == PrefixDataSize {
+				inst.Prefix[i] &^= PrefixImplicit | PrefixIgnored
+			}
+		}
+
+	case 0:
+		// ok
+	}
+
+	switch inst.Op {
+	case INSB, INSD, INSW, OUTSB, OUTSD, OUTSW, MONITOR, MWAIT, XLATB:
+		iargs = nil
+
+	case STOSB, STOSW, STOSD, STOSQ:
+		iargs = iargs[:1]
+
+	case LODSB, LODSW, LODSD, LODSQ, SCASB, SCASW, SCASD, SCASQ:
+		iargs = iargs[1:]
+	}
+
+	const (
+		haveData16 = 1 << iota
+		haveData32
+		haveAddr16
+		haveAddr32
+		haveXacquire
+		haveXrelease
+		haveLock
+		haveHintTaken
+		haveHintNotTaken
+		haveBnd
+	)
+	var prefixBits uint32
+	prefix := ""
+	for _, p := range inst.Prefix {
+		if p == 0 {
+			break
+		}
+		if p&0xFF == 0xF3 {
+			prefixBits &^= haveBnd
+		}
+		if p&(PrefixImplicit|PrefixIgnored) != 0 {
+			continue
+		}
+		switch p {
+		default:
+			prefix += strings.ToLower(p.String()) + " "
+		case PrefixCS, PrefixDS, PrefixES, PrefixFS, PrefixGS, PrefixSS:
+			if inst.Op == 0 {
+				prefix += strings.ToLower(p.String()) + " "
+			}
+		case PrefixREPN:
+			prefix += "repne "
+		case PrefixLOCK:
+			prefixBits |= haveLock
+		case PrefixData16, PrefixDataSize:
+			prefixBits |= haveData16
+		case PrefixData32:
+			prefixBits |= haveData32
+		case PrefixAddrSize, PrefixAddr16:
+			prefixBits |= haveAddr16
+		case PrefixAddr32:
+			prefixBits |= haveAddr32
+		case PrefixXACQUIRE:
+			prefixBits |= haveXacquire
+		case PrefixXRELEASE:
+			prefixBits |= haveXrelease
+		case PrefixPT:
+			prefixBits |= haveHintTaken
+		case PrefixPN:
+			prefixBits |= haveHintNotTaken
+		case PrefixBND:
+			prefixBits |= haveBnd
+		}
+	}
+	switch inst.Op {
+	case JMP:
+		if inst.Opcode>>24 == 0xEB {
+			prefixBits &^= haveBnd
+		}
+	case RET, LRET:
+		prefixBits &^= haveData16 | haveData32
+	}
+
+	if prefixBits&haveXacquire != 0 {
+		prefix += "xacquire "
+	}
+	if prefixBits&haveXrelease != 0 {
+		prefix += "xrelease "
+	}
+	if prefixBits&haveLock != 0 {
+		prefix += "lock "
+	}
+	if prefixBits&haveBnd != 0 {
+		prefix += "bnd "
+	}
+	if prefixBits&haveHintTaken != 0 {
+		prefix += "hint-taken "
+	}
+	if prefixBits&haveHintNotTaken != 0 {
+		prefix += "hint-not-taken "
+	}
+	if prefixBits&haveAddr16 != 0 {
+		prefix += "addr16 "
+	}
+	if prefixBits&haveAddr32 != 0 {
+		prefix += "addr32 "
+	}
+	if prefixBits&haveData16 != 0 {
+		prefix += "data16 "
+	}
+	if prefixBits&haveData32 != 0 {
+		prefix += "data32 "
+	}
+
+	if inst.Op == 0 {
+		if prefix == "" {
+			return "<no instruction>"
+		}
+		return prefix[:len(prefix)-1]
+	}
+
+	var args []string
+	for _, a := range iargs {
+		if a == nil {
+			break
+		}
+		args = append(args, intelArg(&inst, pc, symname, a))
+	}
+
+	var op string
+	switch inst.Op {
+	case NOP:
+		if inst.Opcode>>24 == 0x0F {
+			if inst.DataSize == 16 {
+				args = append(args, "ax")
+			} else {
+				args = append(args, "eax")
+			}
+		}
+
+	case BLENDVPD, BLENDVPS, PBLENDVB:
+		args = args[:2]
+
+	case INT:
+		if inst.Opcode>>24 == 0xCC {
+			args = nil
+			op = "int3"
+		}
+
+	case LCALL, LJMP:
+		if len(args) == 2 {
+			args[0], args[1] = args[1], args[0]
+		}
+
+	case FCHS, FABS, FTST, FLDPI, FLDL2E, FLDLG2, F2XM1, FXAM, FLD1, FLDL2T, FSQRT, FRNDINT, FCOS, FSIN:
+		if len(args) == 0 {
+			args = append(args, "st0")
+		}
+
+	case FPTAN, FSINCOS, FUCOMPP, FCOMPP, FYL2X, FPATAN, FXTRACT, FPREM1, FPREM, FYL2XP1, FSCALE:
+		if len(args) == 0 {
+			args = []string{"st0", "st1"}
+		}
+
+	case FST, FSTP, FISTTP, FIST, FISTP, FBSTP:
+		if len(args) == 1 {
+			args = append(args, "st0")
+		}
+
+	case FLD, FXCH, FCOM, FCOMP, FIADD, FIMUL, FICOM, FICOMP, FISUBR, FIDIV, FUCOM, FUCOMP, FILD, FBLD, FADD, FMUL, FSUB, FSUBR, FISUB, FDIV, FDIVR, FIDIVR:
+		if len(args) == 1 {
+			args = []string{"st0", args[0]}
+		}
+
+	case MASKMOVDQU, MASKMOVQ, XLATB, OUTSB, OUTSW, OUTSD:
+	FixSegment:
+		for i := len(inst.Prefix) - 1; i >= 0; i-- {
+			p := inst.Prefix[i] & 0xFF
+			switch p {
+			case PrefixCS, PrefixES, PrefixFS, PrefixGS, PrefixSS:
+				if inst.Mode != 64 || p == PrefixFS || p == PrefixGS {
+					args = append(args, strings.ToLower((inst.Prefix[i] & 0xFF).String()))
+					break FixSegment
+				}
+			case PrefixDS:
+				if inst.Mode != 64 {
+					break FixSegment
+				}
+			}
+		}
+	}
+
+	if op == "" {
+		op = intelOp[inst.Op]
+	}
+	if op == "" {
+		op = strings.ToLower(inst.Op.String())
+	}
+	if args != nil {
+		op += " " + strings.Join(args, ", ")
+	}
+	return prefix + op
+}
+
+func intelArg(inst *Inst, pc uint64, symname SymLookup, arg Arg) string {
+	switch a := arg.(type) {
+	case Imm:
+		if s, base := symname(uint64(a)); s != "" {
+			suffix := ""
+			if uint64(a) != base {
+				suffix = fmt.Sprintf("%+d", uint64(a)-base)
+			}
+			return fmt.Sprintf("$%s%s", s, suffix)
+		}
+		if inst.Mode == 32 {
+			return fmt.Sprintf("%#x", uint32(a))
+		}
+		if Imm(int32(a)) == a {
+			return fmt.Sprintf("%#x", int64(a))
+		}
+		return fmt.Sprintf("%#x", uint64(a))
+	case Mem:
+		if a.Base == EIP {
+			a.Base = RIP
+		}
+		prefix := ""
+		switch inst.MemBytes {
+		case 1:
+			prefix = "byte "
+		case 2:
+			prefix = "word "
+		case 4:
+			prefix = "dword "
+		case 8:
+			prefix = "qword "
+		case 16:
+			prefix = "xmmword "
+		case 32:
+			prefix = "ymmword "
+		}
+		switch inst.Op {
+		case INVLPG:
+			prefix = "byte "
+		case STOSB, MOVSB, CMPSB, LODSB, SCASB:
+			prefix = "byte "
+		case STOSW, MOVSW, CMPSW, LODSW, SCASW:
+			prefix = "word "
+		case STOSD, MOVSD, CMPSD, LODSD, SCASD:
+			prefix = "dword "
+		case STOSQ, MOVSQ, CMPSQ, LODSQ, SCASQ:
+			prefix = "qword "
+		case LAR:
+			prefix = "word "
+		case BOUND:
+			if inst.Mode == 32 {
+				prefix = "qword "
+			} else {
+				prefix = "dword "
+			}
+		case PREFETCHW, PREFETCHNTA, PREFETCHT0, PREFETCHT1, PREFETCHT2, CLFLUSH:
+			prefix = "zmmword "
+		}
+		switch inst.Op {
+		case MOVSB, MOVSW, MOVSD, MOVSQ, CMPSB, CMPSW, CMPSD, CMPSQ, STOSB, STOSW, STOSD, STOSQ, SCASB, SCASW, SCASD, SCASQ, LODSB, LODSW, LODSD, LODSQ:
+			switch a.Base {
+			case DI, EDI, RDI:
+				if a.Segment == ES {
+					a.Segment = 0
+				}
+			case SI, ESI, RSI:
+				if a.Segment == DS {
+					a.Segment = 0
+				}
+			}
+		case LEA:
+			a.Segment = 0
+		default:
+			switch a.Base {
+			case SP, ESP, RSP, BP, EBP, RBP:
+				if a.Segment == SS {
+					a.Segment = 0
+				}
+			default:
+				if a.Segment == DS {
+					a.Segment = 0
+				}
+			}
+		}
+
+		if inst.Mode == 64 && a.Segment != FS && a.Segment != GS {
+			a.Segment = 0
+		}
+
+		prefix += "ptr "
+		if s, disp := memArgToSymbol(a, pc, inst.Len, symname); s != "" {
+			suffix := ""
+			if disp != 0 {
+				suffix = fmt.Sprintf("%+d", disp)
+			}
+			return prefix + fmt.Sprintf("[%s%s]", s, suffix)
+		}
+		if a.Segment != 0 {
+			prefix += strings.ToLower(a.Segment.String()) + ":"
+		}
+		prefix += "["
+		if a.Base != 0 {
+			prefix += intelArg(inst, pc, symname, a.Base)
+		}
+		if a.Scale != 0 && a.Index != 0 {
+			if a.Base != 0 {
+				prefix += "+"
+			}
+			prefix += fmt.Sprintf("%s*%d", intelArg(inst, pc, symname, a.Index), a.Scale)
+		}
+		if a.Disp != 0 {
+			if prefix[len(prefix)-1] == '[' && (a.Disp >= 0 || int64(int32(a.Disp)) != a.Disp) {
+				prefix += fmt.Sprintf("%#x", uint64(a.Disp))
+			} else {
+				prefix += fmt.Sprintf("%+#x", a.Disp)
+			}
+		}
+		prefix += "]"
+		return prefix
+	case Rel:
+		if pc == 0 {
+			return fmt.Sprintf(".%+#x", int64(a))
+		} else {
+			addr := pc + uint64(inst.Len) + uint64(a)
+			if s, base := symname(addr); s != "" && addr == base {
+				return fmt.Sprintf("%s", s)
+			} else {
+				addr := pc + uint64(inst.Len) + uint64(a)
+				return fmt.Sprintf("%#x", addr)
+			}
+		}
+	case Reg:
+		if int(a) < len(intelReg) && intelReg[a] != "" {
+			switch inst.Op {
+			case VMOVDQA, VMOVDQU, VMOVNTDQA, VMOVNTDQ:
+				return strings.Replace(intelReg[a], "xmm", "ymm", -1)
+			default:
+				return intelReg[a]
+			}
+		}
+	}
+	return strings.ToLower(arg.String())
+}
+
+var intelOp = map[Op]string{
+	JAE:       "jnb",
+	JA:        "jnbe",
+	JGE:       "jnl",
+	JNE:       "jnz",
+	JG:        "jnle",
+	JE:        "jz",
+	SETAE:     "setnb",
+	SETA:      "setnbe",
+	SETGE:     "setnl",
+	SETNE:     "setnz",
+	SETG:      "setnle",
+	SETE:      "setz",
+	CMOVAE:    "cmovnb",
+	CMOVA:     "cmovnbe",
+	CMOVGE:    "cmovnl",
+	CMOVNE:    "cmovnz",
+	CMOVG:     "cmovnle",
+	CMOVE:     "cmovz",
+	LCALL:     "call far",
+	LJMP:      "jmp far",
+	LRET:      "ret far",
+	ICEBP:     "int1",
+	MOVSD_XMM: "movsd",
+	XLATB:     "xlat",
+}
+
+var intelReg = [...]string{
+	F0:  "st0",
+	F1:  "st1",
+	F2:  "st2",
+	F3:  "st3",
+	F4:  "st4",
+	F5:  "st5",
+	F6:  "st6",
+	F7:  "st7",
+	M0:  "mmx0",
+	M1:  "mmx1",
+	M2:  "mmx2",
+	M3:  "mmx3",
+	M4:  "mmx4",
+	M5:  "mmx5",
+	M6:  "mmx6",
+	M7:  "mmx7",
+	X0:  "xmm0",
+	X1:  "xmm1",
+	X2:  "xmm2",
+	X3:  "xmm3",
+	X4:  "xmm4",
+	X5:  "xmm5",
+	X6:  "xmm6",
+	X7:  "xmm7",
+	X8:  "xmm8",
+	X9:  "xmm9",
+	X10: "xmm10",
+	X11: "xmm11",
+	X12: "xmm12",
+	X13: "xmm13",
+	X14: "xmm14",
+	X15: "xmm15",
+
+	// TODO: Maybe the constants are named wrong.
+	SPB: "spl",
+	BPB: "bpl",
+	SIB: "sil",
+	DIB: "dil",
+
+	R8L:  "r8d",
+	R9L:  "r9d",
+	R10L: "r10d",
+	R11L: "r11d",
+	R12L: "r12d",
+	R13L: "r13d",
+	R14L: "r14d",
+	R15L: "r15d",
+}

vendor/golang.org/x/arch/x86/x86asm/plan9x.go

@@ -0,0 +1,382 @@
+// Copyright 2014 The Go Authors.  All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package x86asm
+
+import (
+	"fmt"
+	"strings"
+)
+
+type SymLookup func(uint64) (string, uint64)
+
+// GoSyntax returns the Go assembler syntax for the instruction.
+// The syntax was originally defined by Plan 9.
+// The pc is the program counter of the instruction, used for expanding
+// PC-relative addresses into absolute ones.
+// The symname function queries the symbol table for the program
+// being disassembled. Given a target address it returns the name and base
+// address of the symbol containing the target, if any; otherwise it returns "", 0.
+func GoSyntax(inst Inst, pc uint64, symname SymLookup) string {
+	if symname == nil {
+		symname = func(uint64) (string, uint64) { return "", 0 }
+	}
+	var args []string
+	for i := len(inst.Args) - 1; i >= 0; i-- {
+		a := inst.Args[i]
+		if a == nil {
+			continue
+		}
+		args = append(args, plan9Arg(&inst, pc, symname, a))
+	}
+
+	var rep string
+	var last Prefix
+	for _, p := range inst.Prefix {
+		if p == 0 || p.IsREX() || p.IsVEX() {
+			break
+		}
+
+		switch {
+		// Don't show prefixes implied by the instruction text.
+		case p&0xFF00 == PrefixImplicit:
+			continue
+		// Only REP and REPN are recognized repeaters. Plan 9 syntax
+		// treats them as separate opcodes.
+		case p&0xFF == PrefixREP:
+			rep = "REP; "
+		case p&0xFF == PrefixREPN:
+			rep = "REPNE; "
+		default:
+			last = p
+		}
+	}
+
+	prefix := ""
+	switch last & 0xFF {
+	case 0, 0x66, 0x67:
+		// ignore
+	default:
+		prefix += last.String() + " "
+	}
+
+	op := inst.Op.String()
+	if plan9Suffix[inst.Op] {
+		s := inst.DataSize
+		if inst.MemBytes != 0 {
+			s = inst.MemBytes * 8
+		}
+		switch s {
+		case 8:
+			op += "B"
+		case 16:
+			op += "W"
+		case 32:
+			op += "L"
+		case 64:
+			op += "Q"
+		}
+	}
+
+	if args != nil {
+		op += " " + strings.Join(args, ", ")
+	}
+
+	return rep + prefix + op
+}
+
+func plan9Arg(inst *Inst, pc uint64, symname func(uint64) (string, uint64), arg Arg) string {
+	switch a := arg.(type) {
+	case Reg:
+		return plan9Reg[a]
+	case Rel:
+		if pc == 0 {
+			break
+		}
+		// If the absolute address is the start of a symbol, use the name.
+		// Otherwise use the raw address, so that things like relative
+		// jumps show up as JMP 0x123 instead of JMP f+10(SB).
+		// It is usually easier to search for 0x123 than to do the mental
+		// arithmetic to find f+10.
+		addr := pc + uint64(inst.Len) + uint64(a)
+		if s, base := symname(addr); s != "" && addr == base {
+			return fmt.Sprintf("%s(SB)", s)
+		}
+		return fmt.Sprintf("%#x", addr)
+
+	case Imm:
+		if s, base := symname(uint64(a)); s != "" {
+			suffix := ""
+			if uint64(a) != base {
+				suffix = fmt.Sprintf("%+d", uint64(a)-base)
+			}
+			return fmt.Sprintf("$%s%s(SB)", s, suffix)
+		}
+		if inst.Mode == 32 {
+			return fmt.Sprintf("$%#x", uint32(a))
+		}
+		if Imm(int32(a)) == a {
+			return fmt.Sprintf("$%#x", int64(a))
+		}
+		return fmt.Sprintf("$%#x", uint64(a))
+	case Mem:
+		if s, disp := memArgToSymbol(a, pc, inst.Len, symname); s != "" {
+			suffix := ""
+			if disp != 0 {
+				suffix = fmt.Sprintf("%+d", disp)
+			}
+			return fmt.Sprintf("%s%s(SB)", s, suffix)
+		}
+		s := ""
+		if a.Segment != 0 {
+			s += fmt.Sprintf("%s:", plan9Reg[a.Segment])
+		}
+		if a.Disp != 0 {
+			s += fmt.Sprintf("%#x", a.Disp)
+		} else {
+			s += "0"
+		}
+		if a.Base != 0 {
+			s += fmt.Sprintf("(%s)", plan9Reg[a.Base])
+		}
+		if a.Index != 0 && a.Scale != 0 {
+			s += fmt.Sprintf("(%s*%d)", plan9Reg[a.Index], a.Scale)
+		}
+		return s
+	}
+	return arg.String()
+}
+
+func memArgToSymbol(a Mem, pc uint64, instrLen int, symname SymLookup) (string, int64) {
+	if a.Segment != 0 || a.Disp == 0 || a.Index != 0 || a.Scale != 0 {
+		return "", 0
+	}
+
+	var disp uint64
+	switch a.Base {
+	case IP, EIP, RIP:
+		disp = uint64(a.Disp + int64(pc) + int64(instrLen))
+	case 0:
+		disp = uint64(a.Disp)
+	default:
+		return "", 0
+	}
+
+	s, base := symname(disp)
+	return s, int64(disp) - int64(base)
+}
+
+var plan9Suffix = [maxOp + 1]bool{
+	ADC:       true,
+	ADD:       true,
+	AND:       true,
+	BSF:       true,
+	BSR:       true,
+	BT:        true,
+	BTC:       true,
+	BTR:       true,
+	BTS:       true,
+	CMP:       true,
+	CMPXCHG:   true,
+	CVTSI2SD:  true,
+	CVTSI2SS:  true,
+	CVTSD2SI:  true,
+	CVTSS2SI:  true,
+	CVTTSD2SI: true,
+	CVTTSS2SI: true,
+	DEC:       true,
+	DIV:       true,
+	FLDENV:    true,
+	FRSTOR:    true,
+	IDIV:      true,
+	IMUL:      true,
+	IN:        true,
+	INC:       true,
+	LEA:       true,
+	MOV:       true,
+	MOVNTI:    true,
+	MUL:       true,
+	NEG:       true,
+	NOP:       true,
+	NOT:       true,
+	OR:        true,
+	OUT:       true,
+	POP:       true,
+	POPA:      true,
+	POPCNT:    true,
+	PUSH:      true,
+	PUSHA:     true,
+	RCL:       true,
+	RCR:       true,
+	ROL:       true,
+	ROR:       true,
+	SAR:       true,
+	SBB:       true,
+	SHL:       true,
+	SHLD:      true,
+	SHR:       true,
+	SHRD:      true,
+	SUB:       true,
+	TEST:      true,
+	XADD:      true,
+	XCHG:      true,
+	XOR:       true,
+}
+
+var plan9Reg = [...]string{
+	AL:   "AL",
+	CL:   "CL",
+	BL:   "BL",
+	DL:   "DL",
+	AH:   "AH",
+	CH:   "CH",
+	BH:   "BH",
+	DH:   "DH",
+	SPB:  "SP",
+	BPB:  "BP",
+	SIB:  "SI",
+	DIB:  "DI",
+	R8B:  "R8",
+	R9B:  "R9",
+	R10B: "R10",
+	R11B: "R11",
+	R12B: "R12",
+	R13B: "R13",
+	R14B: "R14",
+	R15B: "R15",
+	AX:   "AX",
+	CX:   "CX",
+	BX:   "BX",
+	DX:   "DX",
+	SP:   "SP",
+	BP:   "BP",
+	SI:   "SI",
+	DI:   "DI",
+	R8W:  "R8",
+	R9W:  "R9",
+	R10W: "R10",
+	R11W: "R11",
+	R12W: "R12",
+	R13W: "R13",
+	R14W: "R14",
+	R15W: "R15",
+	EAX:  "AX",
+	ECX:  "CX",
+	EDX:  "DX",
+	EBX:  "BX",
+	ESP:  "SP",
+	EBP:  "BP",
+	ESI:  "SI",
+	EDI:  "DI",
+	R8L:  "R8",
+	R9L:  "R9",
+	R10L: "R10",
+	R11L: "R11",
+	R12L: "R12",
+	R13L: "R13",
+	R14L: "R14",
+	R15L: "R15",
+	RAX:  "AX",
+	RCX:  "CX",
+	RDX:  "DX",
+	RBX:  "BX",
+	RSP:  "SP",
+	RBP:  "BP",
+	RSI:  "SI",
+	RDI:  "DI",
+	R8:   "R8",
+	R9:   "R9",
+	R10:  "R10",
+	R11:  "R11",
+	R12:  "R12",
+	R13:  "R13",
+	R14:  "R14",
+	R15:  "R15",
+	IP:   "IP",
+	EIP:  "IP",
+	RIP:  "IP",
+	F0:   "F0",
+	F1:   "F1",
+	F2:   "F2",
+	F3:   "F3",
+	F4:   "F4",
+	F5:   "F5",
+	F6:   "F6",
+	F7:   "F7",
+	M0:   "M0",
+	M1:   "M1",
+	M2:   "M2",
+	M3:   "M3",
+	M4:   "M4",
+	M5:   "M5",
+	M6:   "M6",
+	M7:   "M7",
+	X0:   "X0",
+	X1:   "X1",
+	X2:   "X2",
+	X3:   "X3",
+	X4:   "X4",
+	X5:   "X5",
+	X6:   "X6",
+	X7:   "X7",
+	X8:   "X8",
+	X9:   "X9",
+	X10:  "X10",
+	X11:  "X11",
+	X12:  "X12",
+	X13:  "X13",
+	X14:  "X14",
+	X15:  "X15",
+	CS:   "CS",
+	SS:   "SS",
+	DS:   "DS",
+	ES:   "ES",
+	FS:   "FS",
+	GS:   "GS",
+	GDTR: "GDTR",
+	IDTR: "IDTR",
+	LDTR: "LDTR",
+	MSW:  "MSW",
+	TASK: "TASK",
+	CR0:  "CR0",
+	CR1:  "CR1",
+	CR2:  "CR2",
+	CR3:  "CR3",
+	CR4:  "CR4",
+	CR5:  "CR5",
+	CR6:  "CR6",
+	CR7:  "CR7",
+	CR8:  "CR8",
+	CR9:  "CR9",
+	CR10: "CR10",
+	CR11: "CR11",
+	CR12: "CR12",
+	CR13: "CR13",
+	CR14: "CR14",
+	CR15: "CR15",
+	DR0:  "DR0",
+	DR1:  "DR1",
+	DR2:  "DR2",
+	DR3:  "DR3",
+	DR4:  "DR4",
+	DR5:  "DR5",
+	DR6:  "DR6",
+	DR7:  "DR7",
+	DR8:  "DR8",
+	DR9:  "DR9",
+	DR10: "DR10",
+	DR11: "DR11",
+	DR12: "DR12",
+	DR13: "DR13",
+	DR14: "DR14",
+	DR15: "DR15",
+	TR0:  "TR0",
+	TR1:  "TR1",
+	TR2:  "TR2",
+	TR3:  "TR3",
+	TR4:  "TR4",
+	TR5:  "TR5",
+	TR6:  "TR6",
+	TR7:  "TR7",
+}

vendor/golang.org/x/crypto/LICENSE

@@ -0,0 +1,27 @@
+Copyright 2009 The Go Authors.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+   * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+   * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+   * Neither the name of Google LLC nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

vendor/golang.org/x/crypto/PATENTS

@@ -0,0 +1,22 @@
+Additional IP Rights Grant (Patents)
+
+"This implementation" means the copyrightable works distributed by
+Google as part of the Go project.
+
+Google hereby grants to You a perpetual, worldwide, non-exclusive,
+no-charge, royalty-free, irrevocable (except as stated in this section)
+patent license to make, have made, use, offer to sell, sell, import,
+transfer and otherwise run, modify and propagate the contents of this
+implementation of Go, where such license applies only to those patent
+claims, both currently owned or controlled by Google and acquired in
+the future, licensable by Google that are necessarily infringed by this
+implementation of Go.  This grant does not include claims that would be
+infringed only as a consequence of further modification of this
+implementation.  If you or your agent or exclusive licensee institute or
+order or agree to the institution of patent litigation against any
+entity (including a cross-claim or counterclaim in a lawsuit) alleging
+that this implementation of Go or any code incorporated within this
+implementation of Go constitutes direct or contributory patent
+infringement, or inducement of patent infringement, then any patent
+rights granted to you under this License for this implementation of Go
+shall terminate as of the date such litigation is filed.

vendor/golang.org/x/crypto/argon2/argon2.go

@@ -0,0 +1,283 @@
+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package argon2 implements the key derivation function Argon2.
+// Argon2 was selected as the winner of the Password Hashing Competition and can
+// be used to derive cryptographic keys from passwords.
+//
+// For a detailed specification of Argon2 see [1].
+//
+// If you aren't sure which function you need, use Argon2id (IDKey) and
+// the parameter recommendations for your scenario.
+//
+// # Argon2i
+//
+// Argon2i (implemented by Key) is the side-channel resistant version of Argon2.
+// It uses data-independent memory access, which is preferred for password
+// hashing and password-based key derivation. Argon2i requires more passes over
+// memory than Argon2id to protect from trade-off attacks. The recommended
+// parameters (taken from [2]) for non-interactive operations are time=3 and to
+// use the maximum available memory.
+//
+// # Argon2id
+//
+// Argon2id (implemented by IDKey) is a hybrid version of Argon2 combining
+// Argon2i and Argon2d. It uses data-independent memory access for the first
+// half of the first iteration over the memory and data-dependent memory access
+// for the rest. Argon2id is side-channel resistant and provides better brute-
+// force cost savings due to time-memory tradeoffs than Argon2i. The recommended
+// parameters for non-interactive operations (taken from [2]) are time=1 and to
+// use the maximum available memory.
+//
+// [1] https://github.com/P-H-C/phc-winner-argon2/blob/master/argon2-specs.pdf
+// [2] https://tools.ietf.org/html/draft-irtf-cfrg-argon2-03#section-9.3
+package argon2
+
+import (
+	"encoding/binary"
+	"sync"
+
+	"golang.org/x/crypto/blake2b"
+)
+
+// The Argon2 version implemented by this package.
+const Version = 0x13
+
+const (
+	argon2d = iota
+	argon2i
+	argon2id
+)
+
+// Key derives a key from the password, salt, and cost parameters using Argon2i
+// returning a byte slice of length keyLen that can be used as cryptographic
+// key. The CPU cost and parallelism degree must be greater than zero.
+//
+// For example, you can get a derived key for e.g. AES-256 (which needs a
+// 32-byte key) by doing:
+//
+//	key := argon2.Key([]byte("some password"), salt, 3, 32*1024, 4, 32)
+//
+// The draft RFC recommends[2] time=3, and memory=32*1024 is a sensible number.
+// If using that amount of memory (32 MB) is not possible in some contexts then
+// the time parameter can be increased to compensate.
+//
+// The time parameter specifies the number of passes over the memory and the
+// memory parameter specifies the size of the memory in KiB. For example
+// memory=32*1024 sets the memory cost to ~32 MB. The number of threads can be
+// adjusted to the number of available CPUs. The cost parameters should be
+// increased as memory latency and CPU parallelism increases. Remember to get a
+// good random salt.
+func Key(password, salt []byte, time, memory uint32, threads uint8, keyLen uint32) []byte {
+	return deriveKey(argon2i, password, salt, nil, nil, time, memory, threads, keyLen)
+}
+
+// IDKey derives a key from the password, salt, and cost parameters using
+// Argon2id returning a byte slice of length keyLen that can be used as
+// cryptographic key. The CPU cost and parallelism degree must be greater than
+// zero.
+//
+// For example, you can get a derived key for e.g. AES-256 (which needs a
+// 32-byte key) by doing:
+//
+//	key := argon2.IDKey([]byte("some password"), salt, 1, 64*1024, 4, 32)
+//
+// The draft RFC recommends[2] time=1, and memory=64*1024 is a sensible number.
+// If using that amount of memory (64 MB) is not possible in some contexts then
+// the time parameter can be increased to compensate.
+//
+// The time parameter specifies the number of passes over the memory and the
+// memory parameter specifies the size of the memory in KiB. For example
+// memory=64*1024 sets the memory cost to ~64 MB. The number of threads can be
+// adjusted to the numbers of available CPUs. The cost parameters should be
+// increased as memory latency and CPU parallelism increases. Remember to get a
+// good random salt.
+func IDKey(password, salt []byte, time, memory uint32, threads uint8, keyLen uint32) []byte {
+	return deriveKey(argon2id, password, salt, nil, nil, time, memory, threads, keyLen)
+}
+
+func deriveKey(mode int, password, salt, secret, data []byte, time, memory uint32, threads uint8, keyLen uint32) []byte {
+	if time < 1 {
+		panic("argon2: number of rounds too small")
+	}
+	if threads < 1 {
+		panic("argon2: parallelism degree too low")
+	}
+	h0 := initHash(password, salt, secret, data, time, memory, uint32(threads), keyLen, mode)
+
+	memory = memory / (syncPoints * uint32(threads)) * (syncPoints * uint32(threads))
+	if memory < 2*syncPoints*uint32(threads) {
+		memory = 2 * syncPoints * uint32(threads)
+	}
+	B := initBlocks(&h0, memory, uint32(threads))
+	processBlocks(B, time, memory, uint32(threads), mode)
+	return extractKey(B, memory, uint32(threads), keyLen)
+}
+
+const (
+	blockLength = 128
+	syncPoints  = 4
+)
+
+type block [blockLength]uint64
+
+func initHash(password, salt, key, data []byte, time, memory, threads, keyLen uint32, mode int) [blake2b.Size + 8]byte {
+	var (
+		h0     [blake2b.Size + 8]byte
+		params [24]byte
+		tmp    [4]byte
+	)
+
+	b2, _ := blake2b.New512(nil)
+	binary.LittleEndian.PutUint32(params[0:4], threads)
+	binary.LittleEndian.PutUint32(params[4:8], keyLen)
+	binary.LittleEndian.PutUint32(params[8:12], memory)
+	binary.LittleEndian.PutUint32(params[12:16], time)
+	binary.LittleEndian.PutUint32(params[16:20], uint32(Version))
+	binary.LittleEndian.PutUint32(params[20:24], uint32(mode))
+	b2.Write(params[:])
+	binary.LittleEndian.PutUint32(tmp[:], uint32(len(password)))
+	b2.Write(tmp[:])
+	b2.Write(password)
+	binary.LittleEndian.PutUint32(tmp[:], uint32(len(salt)))
+	b2.Write(tmp[:])
+	b2.Write(salt)
+	binary.LittleEndian.PutUint32(tmp[:], uint32(len(key)))
+	b2.Write(tmp[:])
+	b2.Write(key)
+	binary.LittleEndian.PutUint32(tmp[:], uint32(len(data)))
+	b2.Write(tmp[:])
+	b2.Write(data)
+	b2.Sum(h0[:0])
+	return h0
+}
+
+func initBlocks(h0 *[blake2b.Size + 8]byte, memory, threads uint32) []block {
+	var block0 [1024]byte
+	B := make([]block, memory)
+	for lane := uint32(0); lane < threads; lane++ {
+		j := lane * (memory / threads)
+		binary.LittleEndian.PutUint32(h0[blake2b.Size+4:], lane)
+
+		binary.LittleEndian.PutUint32(h0[blake2b.Size:], 0)
+		blake2bHash(block0[:], h0[:])
+		for i := range B[j+0] {
+			B[j+0][i] = binary.LittleEndian.Uint64(block0[i*8:])
+		}
+
+		binary.LittleEndian.PutUint32(h0[blake2b.Size:], 1)
+		blake2bHash(block0[:], h0[:])
+		for i := range B[j+1] {
+			B[j+1][i] = binary.LittleEndian.Uint64(block0[i*8:])
+		}
+	}
+	return B
+}
+
+func processBlocks(B []block, time, memory, threads uint32, mode int) {
+	lanes := memory / threads
+	segments := lanes / syncPoints
+
+	processSegment := func(n, slice, lane uint32, wg *sync.WaitGroup) {
+		var addresses, in, zero block
+		if mode == argon2i || (mode == argon2id && n == 0 && slice < syncPoints/2) {
+			in[0] = uint64(n)
+			in[1] = uint64(lane)
+			in[2] = uint64(slice)
+			in[3] = uint64(memory)
+			in[4] = uint64(time)
+			in[5] = uint64(mode)
+		}
+
+		index := uint32(0)
+		if n == 0 && slice == 0 {
+			index = 2 // we have already generated the first two blocks
+			if mode == argon2i || mode == argon2id {
+				in[6]++
+				processBlock(&addresses, &in, &zero)
+				processBlock(&addresses, &addresses, &zero)
+			}
+		}
+
+		offset := lane*lanes + slice*segments + index
+		var random uint64
+		for index < segments {
+			prev := offset - 1
+			if index == 0 && slice == 0 {
+				prev += lanes // last block in lane
+			}
+			if mode == argon2i || (mode == argon2id && n == 0 && slice < syncPoints/2) {
+				if index%blockLength == 0 {
+					in[6]++
+					processBlock(&addresses, &in, &zero)
+					processBlock(&addresses, &addresses, &zero)
+				}
+				random = addresses[index%blockLength]
+			} else {
+				random = B[prev][0]
+			}
+			newOffset := indexAlpha(random, lanes, segments, threads, n, slice, lane, index)
+			processBlockXOR(&B[offset], &B[prev], &B[newOffset])
+			index, offset = index+1, offset+1
+		}
+		wg.Done()
+	}
+
+	for n := uint32(0); n < time; n++ {
+		for slice := uint32(0); slice < syncPoints; slice++ {
+			var wg sync.WaitGroup
+			for lane := uint32(0); lane < threads; lane++ {
+				wg.Add(1)
+				go processSegment(n, slice, lane, &wg)
+			}
+			wg.Wait()
+		}
+	}
+
+}
+
+func extractKey(B []block, memory, threads, keyLen uint32) []byte {
+	lanes := memory / threads
+	for lane := uint32(0); lane < threads-1; lane++ {
+		for i, v := range B[(lane*lanes)+lanes-1] {
+			B[memory-1][i] ^= v
+		}
+	}
+
+	var block [1024]byte
+	for i, v := range B[memory-1] {
+		binary.LittleEndian.PutUint64(block[i*8:], v)
+	}
+	key := make([]byte, keyLen)
+	blake2bHash(key, block[:])
+	return key
+}
+
+func indexAlpha(rand uint64, lanes, segments, threads, n, slice, lane, index uint32) uint32 {
+	refLane := uint32(rand>>32) % threads
+	if n == 0 && slice == 0 {
+		refLane = lane
+	}
+	m, s := 3*segments, ((slice+1)%syncPoints)*segments
+	if lane == refLane {
+		m += index
+	}
+	if n == 0 {
+		m, s = slice*segments, 0
+		if slice == 0 || lane == refLane {
+			m += index
+		}
+	}
+	if index == 0 || lane == refLane {
+		m--
+	}
+	return phi(rand, uint64(m), uint64(s), refLane, lanes)
+}
+
+func phi(rand, m, s uint64, lane, lanes uint32) uint32 {
+	p := rand & 0xFFFFFFFF
+	p = (p * p) >> 32
+	p = (p * m) >> 32
+	return lane*lanes + uint32((s+m-(p+1))%uint64(lanes))
+}

vendor/golang.org/x/crypto/argon2/blake2b.go

@@ -0,0 +1,53 @@
+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package argon2
+
+import (
+	"encoding/binary"
+	"hash"
+
+	"golang.org/x/crypto/blake2b"
+)
+
+// blake2bHash computes an arbitrary long hash value of in
+// and writes the hash to out.
+func blake2bHash(out []byte, in []byte) {
+	var b2 hash.Hash
+	if n := len(out); n < blake2b.Size {
+		b2, _ = blake2b.New(n, nil)
+	} else {
+		b2, _ = blake2b.New512(nil)
+	}
+
+	var buffer [blake2b.Size]byte
+	binary.LittleEndian.PutUint32(buffer[:4], uint32(len(out)))
+	b2.Write(buffer[:4])
+	b2.Write(in)
+
+	if len(out) <= blake2b.Size {
+		b2.Sum(out[:0])
+		return
+	}
+
+	outLen := len(out)
+	b2.Sum(buffer[:0])
+	b2.Reset()
+	copy(out, buffer[:32])
+	out = out[32:]
+	for len(out) > blake2b.Size {
+		b2.Write(buffer[:])
+		b2.Sum(buffer[:0])
+		copy(out, buffer[:32])
+		out = out[32:]
+		b2.Reset()
+	}
+
+	if outLen%blake2b.Size > 0 { // outLen > 64
+		r := ((outLen + 31) / 32) - 2 // ⌈τ /32⌉-2
+		b2, _ = blake2b.New(outLen-32*r, nil)
+	}
+	b2.Write(buffer[:])
+	b2.Sum(out[:0])
+}

vendor/golang.org/x/crypto/argon2/blamka_amd64.go

@@ -0,0 +1,60 @@
+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build amd64 && gc && !purego
+
+package argon2
+
+import "golang.org/x/sys/cpu"
+
+func init() {
+	useSSE4 = cpu.X86.HasSSE41
+}
+
+//go:noescape
+func mixBlocksSSE2(out, a, b, c *block)
+
+//go:noescape
+func xorBlocksSSE2(out, a, b, c *block)
+
+//go:noescape
+func blamkaSSE4(b *block)
+
+func processBlockSSE(out, in1, in2 *block, xor bool) {
+	var t block
+	mixBlocksSSE2(&t, in1, in2, &t)
+	if useSSE4 {
+		blamkaSSE4(&t)
+	} else {
+		for i := 0; i < blockLength; i += 16 {
+			blamkaGeneric(
+				&t[i+0], &t[i+1], &t[i+2], &t[i+3],
+				&t[i+4], &t[i+5], &t[i+6], &t[i+7],
+				&t[i+8], &t[i+9], &t[i+10], &t[i+11],
+				&t[i+12], &t[i+13], &t[i+14], &t[i+15],
+			)
+		}
+		for i := 0; i < blockLength/8; i += 2 {
+			blamkaGeneric(
+				&t[i], &t[i+1], &t[16+i], &t[16+i+1],
+				&t[32+i], &t[32+i+1], &t[48+i], &t[48+i+1],
+				&t[64+i], &t[64+i+1], &t[80+i], &t[80+i+1],
+				&t[96+i], &t[96+i+1], &t[112+i], &t[112+i+1],
+			)
+		}
+	}
+	if xor {
+		xorBlocksSSE2(out, in1, in2, &t)
+	} else {
+		mixBlocksSSE2(out, in1, in2, &t)
+	}
+}
+
+func processBlock(out, in1, in2 *block) {
+	processBlockSSE(out, in1, in2, false)
+}
+
+func processBlockXOR(out, in1, in2 *block) {
+	processBlockSSE(out, in1, in2, true)
+}

vendor/golang.org/x/crypto/argon2/blamka_generic.go

@@ -0,0 +1,163 @@
+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package argon2
+
+var useSSE4 bool
+
+func processBlockGeneric(out, in1, in2 *block, xor bool) {
+	var t block
+	for i := range t {
+		t[i] = in1[i] ^ in2[i]
+	}
+	for i := 0; i < blockLength; i += 16 {
+		blamkaGeneric(
+			&t[i+0], &t[i+1], &t[i+2], &t[i+3],
+			&t[i+4], &t[i+5], &t[i+6], &t[i+7],
+			&t[i+8], &t[i+9], &t[i+10], &t[i+11],
+			&t[i+12], &t[i+13], &t[i+14], &t[i+15],
+		)
+	}
+	for i := 0; i < blockLength/8; i += 2 {
+		blamkaGeneric(
+			&t[i], &t[i+1], &t[16+i], &t[16+i+1],
+			&t[32+i], &t[32+i+1], &t[48+i], &t[48+i+1],
+			&t[64+i], &t[64+i+1], &t[80+i], &t[80+i+1],
+			&t[96+i], &t[96+i+1], &t[112+i], &t[112+i+1],
+		)
+	}
+	if xor {
+		for i := range t {
+			out[i] ^= in1[i] ^ in2[i] ^ t[i]
+		}
+	} else {
+		for i := range t {
+			out[i] = in1[i] ^ in2[i] ^ t[i]
+		}
+	}
+}
+
+func blamkaGeneric(t00, t01, t02, t03, t04, t05, t06, t07, t08, t09, t10, t11, t12, t13, t14, t15 *uint64) {
+	v00, v01, v02, v03 := *t00, *t01, *t02, *t03
+	v04, v05, v06, v07 := *t04, *t05, *t06, *t07
+	v08, v09, v10, v11 := *t08, *t09, *t10, *t11
+	v12, v13, v14, v15 := *t12, *t13, *t14, *t15
+
+	v00 += v04 + 2*uint64(uint32(v00))*uint64(uint32(v04))
+	v12 ^= v00
+	v12 = v12>>32 | v12<<32
+	v08 += v12 + 2*uint64(uint32(v08))*uint64(uint32(v12))
+	v04 ^= v08
+	v04 = v04>>24 | v04<<40
+
+	v00 += v04 + 2*uint64(uint32(v00))*uint64(uint32(v04))
+	v12 ^= v00
+	v12 = v12>>16 | v12<<48
+	v08 += v12 + 2*uint64(uint32(v08))*uint64(uint32(v12))
+	v04 ^= v08
+	v04 = v04>>63 | v04<<1
+
+	v01 += v05 + 2*uint64(uint32(v01))*uint64(uint32(v05))
+	v13 ^= v01
+	v13 = v13>>32 | v13<<32
+	v09 += v13 + 2*uint64(uint32(v09))*uint64(uint32(v13))
+	v05 ^= v09
+	v05 = v05>>24 | v05<<40
+
+	v01 += v05 + 2*uint64(uint32(v01))*uint64(uint32(v05))
+	v13 ^= v01
+	v13 = v13>>16 | v13<<48
+	v09 += v13 + 2*uint64(uint32(v09))*uint64(uint32(v13))
+	v05 ^= v09
+	v05 = v05>>63 | v05<<1
+
+	v02 += v06 + 2*uint64(uint32(v02))*uint64(uint32(v06))
+	v14 ^= v02
+	v14 = v14>>32 | v14<<32
+	v10 += v14 + 2*uint64(uint32(v10))*uint64(uint32(v14))
+	v06 ^= v10
+	v06 = v06>>24 | v06<<40
+
+	v02 += v06 + 2*uint64(uint32(v02))*uint64(uint32(v06))
+	v14 ^= v02
+	v14 = v14>>16 | v14<<48
+	v10 += v14 + 2*uint64(uint32(v10))*uint64(uint32(v14))
+	v06 ^= v10
+	v06 = v06>>63 | v06<<1
+
+	v03 += v07 + 2*uint64(uint32(v03))*uint64(uint32(v07))
+	v15 ^= v03
+	v15 = v15>>32 | v15<<32
+	v11 += v15 + 2*uint64(uint32(v11))*uint64(uint32(v15))
+	v07 ^= v11
+	v07 = v07>>24 | v07<<40
+
+	v03 += v07 + 2*uint64(uint32(v03))*uint64(uint32(v07))
+	v15 ^= v03
+	v15 = v15>>16 | v15<<48
+	v11 += v15 + 2*uint64(uint32(v11))*uint64(uint32(v15))
+	v07 ^= v11
+	v07 = v07>>63 | v07<<1
+
+	v00 += v05 + 2*uint64(uint32(v00))*uint64(uint32(v05))
+	v15 ^= v00
+	v15 = v15>>32 | v15<<32
+	v10 += v15 + 2*uint64(uint32(v10))*uint64(uint32(v15))
+	v05 ^= v10
+	v05 = v05>>24 | v05<<40
+
+	v00 += v05 + 2*uint64(uint32(v00))*uint64(uint32(v05))
+	v15 ^= v00
+	v15 = v15>>16 | v15<<48
+	v10 += v15 + 2*uint64(uint32(v10))*uint64(uint32(v15))
+	v05 ^= v10
+	v05 = v05>>63 | v05<<1
+
+	v01 += v06 + 2*uint64(uint32(v01))*uint64(uint32(v06))
+	v12 ^= v01
+	v12 = v12>>32 | v12<<32
+	v11 += v12 + 2*uint64(uint32(v11))*uint64(uint32(v12))
+	v06 ^= v11
+	v06 = v06>>24 | v06<<40
+
+	v01 += v06 + 2*uint64(uint32(v01))*uint64(uint32(v06))
+	v12 ^= v01
+	v12 = v12>>16 | v12<<48
+	v11 += v12 + 2*uint64(uint32(v11))*uint64(uint32(v12))
+	v06 ^= v11
+	v06 = v06>>63 | v06<<1
+
+	v02 += v07 + 2*uint64(uint32(v02))*uint64(uint32(v07))
+	v13 ^= v02
+	v13 = v13>>32 | v13<<32
+	v08 += v13 + 2*uint64(uint32(v08))*uint64(uint32(v13))
+	v07 ^= v08
+	v07 = v07>>24 | v07<<40
+
+	v02 += v07 + 2*uint64(uint32(v02))*uint64(uint32(v07))
+	v13 ^= v02
+	v13 = v13>>16 | v13<<48
+	v08 += v13 + 2*uint64(uint32(v08))*uint64(uint32(v13))
+	v07 ^= v08
+	v07 = v07>>63 | v07<<1
+
+	v03 += v04 + 2*uint64(uint32(v03))*uint64(uint32(v04))
+	v14 ^= v03
+	v14 = v14>>32 | v14<<32
+	v09 += v14 + 2*uint64(uint32(v09))*uint64(uint32(v14))
+	v04 ^= v09
+	v04 = v04>>24 | v04<<40
+
+	v03 += v04 + 2*uint64(uint32(v03))*uint64(uint32(v04))
+	v14 ^= v03
+	v14 = v14>>16 | v14<<48
+	v09 += v14 + 2*uint64(uint32(v09))*uint64(uint32(v14))
+	v04 ^= v09
+	v04 = v04>>63 | v04<<1
+
+	*t00, *t01, *t02, *t03 = v00, v01, v02, v03
+	*t04, *t05, *t06, *t07 = v04, v05, v06, v07
+	*t08, *t09, *t10, *t11 = v08, v09, v10, v11
+	*t12, *t13, *t14, *t15 = v12, v13, v14, v15
+}

vendor/golang.org/x/crypto/argon2/blamka_ref.go

@@ -0,0 +1,15 @@
+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build !amd64 || purego || !gc
+
+package argon2
+
+func processBlock(out, in1, in2 *block) {
+	processBlockGeneric(out, in1, in2, false)
+}
+
+func processBlockXOR(out, in1, in2 *block) {
+	processBlockGeneric(out, in1, in2, true)
+}

vendor/golang.org/x/crypto/blake2b/blake2b.go

@@ -0,0 +1,291 @@
+// Copyright 2016 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package blake2b implements the BLAKE2b hash algorithm defined by RFC 7693
+// and the extendable output function (XOF) BLAKE2Xb.
+//
+// BLAKE2b is optimized for 64-bit platforms—including NEON-enabled ARMs—and
+// produces digests of any size between 1 and 64 bytes.
+// For a detailed specification of BLAKE2b see https://blake2.net/blake2.pdf
+// and for BLAKE2Xb see https://blake2.net/blake2x.pdf
+//
+// If you aren't sure which function you need, use BLAKE2b (Sum512 or New512).
+// If you need a secret-key MAC (message authentication code), use the New512
+// function with a non-nil key.
+//
+// BLAKE2X is a construction to compute hash values larger than 64 bytes. It
+// can produce hash values between 0 and 4 GiB.
+package blake2b
+
+import (
+	"encoding/binary"
+	"errors"
+	"hash"
+)
+
+const (
+	// The blocksize of BLAKE2b in bytes.
+	BlockSize = 128
+	// The hash size of BLAKE2b-512 in bytes.
+	Size = 64
+	// The hash size of BLAKE2b-384 in bytes.
+	Size384 = 48
+	// The hash size of BLAKE2b-256 in bytes.
+	Size256 = 32
+)
+
+var (
+	useAVX2 bool
+	useAVX  bool
+	useSSE4 bool
+)
+
+var (
+	errKeySize  = errors.New("blake2b: invalid key size")
+	errHashSize = errors.New("blake2b: invalid hash size")
+)
+
+var iv = [8]uint64{
+	0x6a09e667f3bcc908, 0xbb67ae8584caa73b, 0x3c6ef372fe94f82b, 0xa54ff53a5f1d36f1,
+	0x510e527fade682d1, 0x9b05688c2b3e6c1f, 0x1f83d9abfb41bd6b, 0x5be0cd19137e2179,
+}
+
+// Sum512 returns the BLAKE2b-512 checksum of the data.
+func Sum512(data []byte) [Size]byte {
+	var sum [Size]byte
+	checkSum(&sum, Size, data)
+	return sum
+}
+
+// Sum384 returns the BLAKE2b-384 checksum of the data.
+func Sum384(data []byte) [Size384]byte {
+	var sum [Size]byte
+	var sum384 [Size384]byte
+	checkSum(&sum, Size384, data)
+	copy(sum384[:], sum[:Size384])
+	return sum384
+}
+
+// Sum256 returns the BLAKE2b-256 checksum of the data.
+func Sum256(data []byte) [Size256]byte {
+	var sum [Size]byte
+	var sum256 [Size256]byte
+	checkSum(&sum, Size256, data)
+	copy(sum256[:], sum[:Size256])
+	return sum256
+}
+
+// New512 returns a new hash.Hash computing the BLAKE2b-512 checksum. A non-nil
+// key turns the hash into a MAC. The key must be between zero and 64 bytes long.
+func New512(key []byte) (hash.Hash, error) { return newDigest(Size, key) }
+
+// New384 returns a new hash.Hash computing the BLAKE2b-384 checksum. A non-nil
+// key turns the hash into a MAC. The key must be between zero and 64 bytes long.
+func New384(key []byte) (hash.Hash, error) { return newDigest(Size384, key) }
+
+// New256 returns a new hash.Hash computing the BLAKE2b-256 checksum. A non-nil
+// key turns the hash into a MAC. The key must be between zero and 64 bytes long.
+func New256(key []byte) (hash.Hash, error) { return newDigest(Size256, key) }
+
+// New returns a new hash.Hash computing the BLAKE2b checksum with a custom length.
+// A non-nil key turns the hash into a MAC. The key must be between zero and 64 bytes long.
+// The hash size can be a value between 1 and 64 but it is highly recommended to use
+// values equal or greater than:
+// - 32 if BLAKE2b is used as a hash function (The key is zero bytes long).
+// - 16 if BLAKE2b is used as a MAC function (The key is at least 16 bytes long).
+// When the key is nil, the returned hash.Hash implements BinaryMarshaler
+// and BinaryUnmarshaler for state (de)serialization as documented by hash.Hash.
+func New(size int, key []byte) (hash.Hash, error) { return newDigest(size, key) }
+
+func newDigest(hashSize int, key []byte) (*digest, error) {
+	if hashSize < 1 || hashSize > Size {
+		return nil, errHashSize
+	}
+	if len(key) > Size {
+		return nil, errKeySize
+	}
+	d := &digest{
+		size:   hashSize,
+		keyLen: len(key),
+	}
+	copy(d.key[:], key)
+	d.Reset()
+	return d, nil
+}
+
+func checkSum(sum *[Size]byte, hashSize int, data []byte) {
+	h := iv
+	h[0] ^= uint64(hashSize) | (1 << 16) | (1 << 24)
+	var c [2]uint64
+
+	if length := len(data); length > BlockSize {
+		n := length &^ (BlockSize - 1)
+		if length == n {
+			n -= BlockSize
+		}
+		hashBlocks(&h, &c, 0, data[:n])
+		data = data[n:]
+	}
+
+	var block [BlockSize]byte
+	offset := copy(block[:], data)
+	remaining := uint64(BlockSize - offset)
+	if c[0] < remaining {
+		c[1]--
+	}
+	c[0] -= remaining
+
+	hashBlocks(&h, &c, 0xFFFFFFFFFFFFFFFF, block[:])
+
+	for i, v := range h[:(hashSize+7)/8] {
+		binary.LittleEndian.PutUint64(sum[8*i:], v)
+	}
+}
+
+type digest struct {
+	h      [8]uint64
+	c      [2]uint64
+	size   int
+	block  [BlockSize]byte
+	offset int
+
+	key    [BlockSize]byte
+	keyLen int
+}
+
+const (
+	magic         = "b2b"
+	marshaledSize = len(magic) + 8*8 + 2*8 + 1 + BlockSize + 1
+)
+
+func (d *digest) MarshalBinary() ([]byte, error) {
+	if d.keyLen != 0 {
+		return nil, errors.New("crypto/blake2b: cannot marshal MACs")
+	}
+	b := make([]byte, 0, marshaledSize)
+	b = append(b, magic...)
+	for i := 0; i < 8; i++ {
+		b = appendUint64(b, d.h[i])
+	}
+	b = appendUint64(b, d.c[0])
+	b = appendUint64(b, d.c[1])
+	// Maximum value for size is 64
+	b = append(b, byte(d.size))
+	b = append(b, d.block[:]...)
+	b = append(b, byte(d.offset))
+	return b, nil
+}
+
+func (d *digest) UnmarshalBinary(b []byte) error {
+	if len(b) < len(magic) || string(b[:len(magic)]) != magic {
+		return errors.New("crypto/blake2b: invalid hash state identifier")
+	}
+	if len(b) != marshaledSize {
+		return errors.New("crypto/blake2b: invalid hash state size")
+	}
+	b = b[len(magic):]
+	for i := 0; i < 8; i++ {
+		b, d.h[i] = consumeUint64(b)
+	}
+	b, d.c[0] = consumeUint64(b)
+	b, d.c[1] = consumeUint64(b)
+	d.size = int(b[0])
+	b = b[1:]
+	copy(d.block[:], b[:BlockSize])
+	b = b[BlockSize:]
+	d.offset = int(b[0])
+	return nil
+}
+
+func (d *digest) BlockSize() int { return BlockSize }
+
+func (d *digest) Size() int { return d.size }
+
+func (d *digest) Reset() {
+	d.h = iv
+	d.h[0] ^= uint64(d.size) | (uint64(d.keyLen) << 8) | (1 << 16) | (1 << 24)
+	d.offset, d.c[0], d.c[1] = 0, 0, 0
+	if d.keyLen > 0 {
+		d.block = d.key
+		d.offset = BlockSize
+	}
+}
+
+func (d *digest) Write(p []byte) (n int, err error) {
+	n = len(p)
+
+	if d.offset > 0 {
+		remaining := BlockSize - d.offset
+		if n <= remaining {
+			d.offset += copy(d.block[d.offset:], p)
+			return
+		}
+		copy(d.block[d.offset:], p[:remaining])
+		hashBlocks(&d.h, &d.c, 0, d.block[:])
+		d.offset = 0
+		p = p[remaining:]
+	}
+
+	if length := len(p); length > BlockSize {
+		nn := length &^ (BlockSize - 1)
+		if length == nn {
+			nn -= BlockSize
+		}
+		hashBlocks(&d.h, &d.c, 0, p[:nn])
+		p = p[nn:]
+	}
+
+	if len(p) > 0 {
+		d.offset += copy(d.block[:], p)
+	}
+
+	return
+}
+
+func (d *digest) Sum(sum []byte) []byte {
+	var hash [Size]byte
+	d.finalize(&hash)
+	return append(sum, hash[:d.size]...)
+}
+
+func (d *digest) finalize(hash *[Size]byte) {
+	var block [BlockSize]byte
+	copy(block[:], d.block[:d.offset])
+	remaining := uint64(BlockSize - d.offset)
+
+	c := d.c
+	if c[0] < remaining {
+		c[1]--
+	}
+	c[0] -= remaining
+
+	h := d.h
+	hashBlocks(&h, &c, 0xFFFFFFFFFFFFFFFF, block[:])
+
+	for i, v := range h {
+		binary.LittleEndian.PutUint64(hash[8*i:], v)
+	}
+}
+
+func appendUint64(b []byte, x uint64) []byte {
+	var a [8]byte
+	binary.BigEndian.PutUint64(a[:], x)
+	return append(b, a[:]...)
+}
+
+func appendUint32(b []byte, x uint32) []byte {
+	var a [4]byte
+	binary.BigEndian.PutUint32(a[:], x)
+	return append(b, a[:]...)
+}
+
+func consumeUint64(b []byte) ([]byte, uint64) {
+	x := binary.BigEndian.Uint64(b)
+	return b[8:], x
+}
+
+func consumeUint32(b []byte) ([]byte, uint32) {
+	x := binary.BigEndian.Uint32(b)
+	return b[4:], x
+}

vendor/golang.org/x/crypto/blake2b/blake2bAVX2_amd64.go

@@ -0,0 +1,37 @@
+// Copyright 2016 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build amd64 && gc && !purego
+
+package blake2b
+
+import "golang.org/x/sys/cpu"
+
+func init() {
+	useAVX2 = cpu.X86.HasAVX2
+	useAVX = cpu.X86.HasAVX
+	useSSE4 = cpu.X86.HasSSE41
+}
+
+//go:noescape
+func hashBlocksAVX2(h *[8]uint64, c *[2]uint64, flag uint64, blocks []byte)
+
+//go:noescape
+func hashBlocksAVX(h *[8]uint64, c *[2]uint64, flag uint64, blocks []byte)
+
+//go:noescape
+func hashBlocksSSE4(h *[8]uint64, c *[2]uint64, flag uint64, blocks []byte)
+
+func hashBlocks(h *[8]uint64, c *[2]uint64, flag uint64, blocks []byte) {
+	switch {
+	case useAVX2:
+		hashBlocksAVX2(h, c, flag, blocks)
+	case useAVX:
+		hashBlocksAVX(h, c, flag, blocks)
+	case useSSE4:
+		hashBlocksSSE4(h, c, flag, blocks)
+	default:
+		hashBlocksGeneric(h, c, flag, blocks)
+	}
+}

vendor/golang.org/x/crypto/blake2b/blake2b_generic.go

@@ -0,0 +1,182 @@
+// Copyright 2016 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package blake2b
+
+import (
+	"encoding/binary"
+	"math/bits"
+)
+
+// the precomputed values for BLAKE2b
+// there are 12 16-byte arrays - one for each round
+// the entries are calculated from the sigma constants.
+var precomputed = [12][16]byte{
+	{0, 2, 4, 6, 1, 3, 5, 7, 8, 10, 12, 14, 9, 11, 13, 15},
+	{14, 4, 9, 13, 10, 8, 15, 6, 1, 0, 11, 5, 12, 2, 7, 3},
+	{11, 12, 5, 15, 8, 0, 2, 13, 10, 3, 7, 9, 14, 6, 1, 4},
+	{7, 3, 13, 11, 9, 1, 12, 14, 2, 5, 4, 15, 6, 10, 0, 8},
+	{9, 5, 2, 10, 0, 7, 4, 15, 14, 11, 6, 3, 1, 12, 8, 13},
+	{2, 6, 0, 8, 12, 10, 11, 3, 4, 7, 15, 1, 13, 5, 14, 9},
+	{12, 1, 14, 4, 5, 15, 13, 10, 0, 6, 9, 8, 7, 3, 2, 11},
+	{13, 7, 12, 3, 11, 14, 1, 9, 5, 15, 8, 2, 0, 4, 6, 10},
+	{6, 14, 11, 0, 15, 9, 3, 8, 12, 13, 1, 10, 2, 7, 4, 5},
+	{10, 8, 7, 1, 2, 4, 6, 5, 15, 9, 3, 13, 11, 14, 12, 0},
+	{0, 2, 4, 6, 1, 3, 5, 7, 8, 10, 12, 14, 9, 11, 13, 15}, // equal to the first
+	{14, 4, 9, 13, 10, 8, 15, 6, 1, 0, 11, 5, 12, 2, 7, 3}, // equal to the second
+}
+
+func hashBlocksGeneric(h *[8]uint64, c *[2]uint64, flag uint64, blocks []byte) {
+	var m [16]uint64
+	c0, c1 := c[0], c[1]
+
+	for i := 0; i < len(blocks); {
+		c0 += BlockSize
+		if c0 < BlockSize {
+			c1++
+		}
+
+		v0, v1, v2, v3, v4, v5, v6, v7 := h[0], h[1], h[2], h[3], h[4], h[5], h[6], h[7]
+		v8, v9, v10, v11, v12, v13, v14, v15 := iv[0], iv[1], iv[2], iv[3], iv[4], iv[5], iv[6], iv[7]
+		v12 ^= c0
+		v13 ^= c1
+		v14 ^= flag
+
+		for j := range m {
+			m[j] = binary.LittleEndian.Uint64(blocks[i:])
+			i += 8
+		}
+
+		for j := range precomputed {
+			s := &(precomputed[j])
+
+			v0 += m[s[0]]
+			v0 += v4
+			v12 ^= v0
+			v12 = bits.RotateLeft64(v12, -32)
+			v8 += v12
+			v4 ^= v8
+			v4 = bits.RotateLeft64(v4, -24)
+			v1 += m[s[1]]
+			v1 += v5
+			v13 ^= v1
+			v13 = bits.RotateLeft64(v13, -32)
+			v9 += v13
+			v5 ^= v9
+			v5 = bits.RotateLeft64(v5, -24)
+			v2 += m[s[2]]
+			v2 += v6
+			v14 ^= v2
+			v14 = bits.RotateLeft64(v14, -32)
+			v10 += v14
+			v6 ^= v10
+			v6 = bits.RotateLeft64(v6, -24)
+			v3 += m[s[3]]
+			v3 += v7
+			v15 ^= v3
+			v15 = bits.RotateLeft64(v15, -32)
+			v11 += v15
+			v7 ^= v11
+			v7 = bits.RotateLeft64(v7, -24)
+
+			v0 += m[s[4]]
+			v0 += v4
+			v12 ^= v0
+			v12 = bits.RotateLeft64(v12, -16)
+			v8 += v12
+			v4 ^= v8
+			v4 = bits.RotateLeft64(v4, -63)
+			v1 += m[s[5]]
+			v1 += v5
+			v13 ^= v1
+			v13 = bits.RotateLeft64(v13, -16)
+			v9 += v13
+			v5 ^= v9
+			v5 = bits.RotateLeft64(v5, -63)
+			v2 += m[s[6]]
+			v2 += v6
+			v14 ^= v2
+			v14 = bits.RotateLeft64(v14, -16)
+			v10 += v14
+			v6 ^= v10
+			v6 = bits.RotateLeft64(v6, -63)
+			v3 += m[s[7]]
+			v3 += v7
+			v15 ^= v3
+			v15 = bits.RotateLeft64(v15, -16)
+			v11 += v15
+			v7 ^= v11
+			v7 = bits.RotateLeft64(v7, -63)
+
+			v0 += m[s[8]]
+			v0 += v5
+			v15 ^= v0
+			v15 = bits.RotateLeft64(v15, -32)
+			v10 += v15
+			v5 ^= v10
+			v5 = bits.RotateLeft64(v5, -24)
+			v1 += m[s[9]]
+			v1 += v6
+			v12 ^= v1
+			v12 = bits.RotateLeft64(v12, -32)
+			v11 += v12
+			v6 ^= v11
+			v6 = bits.RotateLeft64(v6, -24)
+			v2 += m[s[10]]
+			v2 += v7
+			v13 ^= v2
+			v13 = bits.RotateLeft64(v13, -32)
+			v8 += v13
+			v7 ^= v8
+			v7 = bits.RotateLeft64(v7, -24)
+			v3 += m[s[11]]
+			v3 += v4
+			v14 ^= v3
+			v14 = bits.RotateLeft64(v14, -32)
+			v9 += v14
+			v4 ^= v9
+			v4 = bits.RotateLeft64(v4, -24)
+
+			v0 += m[s[12]]
+			v0 += v5
+			v15 ^= v0
+			v15 = bits.RotateLeft64(v15, -16)
+			v10 += v15
+			v5 ^= v10
+			v5 = bits.RotateLeft64(v5, -63)
+			v1 += m[s[13]]
+			v1 += v6
+			v12 ^= v1
+			v12 = bits.RotateLeft64(v12, -16)
+			v11 += v12
+			v6 ^= v11
+			v6 = bits.RotateLeft64(v6, -63)
+			v2 += m[s[14]]
+			v2 += v7
+			v13 ^= v2
+			v13 = bits.RotateLeft64(v13, -16)
+			v8 += v13
+			v7 ^= v8
+			v7 = bits.RotateLeft64(v7, -63)
+			v3 += m[s[15]]
+			v3 += v4
+			v14 ^= v3
+			v14 = bits.RotateLeft64(v14, -16)
+			v9 += v14
+			v4 ^= v9
+			v4 = bits.RotateLeft64(v4, -63)
+
+		}
+
+		h[0] ^= v0 ^ v8
+		h[1] ^= v1 ^ v9
+		h[2] ^= v2 ^ v10
+		h[3] ^= v3 ^ v11
+		h[4] ^= v4 ^ v12
+		h[5] ^= v5 ^ v13
+		h[6] ^= v6 ^ v14
+		h[7] ^= v7 ^ v15
+	}
+	c[0], c[1] = c0, c1
+}

vendor/golang.org/x/crypto/blake2b/blake2b_ref.go

@@ -0,0 +1,11 @@
+// Copyright 2016 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build !amd64 || purego || !gc
+
+package blake2b
+
+func hashBlocks(h *[8]uint64, c *[2]uint64, flag uint64, blocks []byte) {
+	hashBlocksGeneric(h, c, flag, blocks)
+}

vendor/golang.org/x/crypto/blake2b/blake2x.go

@@ -0,0 +1,177 @@
+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package blake2b
+
+import (
+	"encoding/binary"
+	"errors"
+	"io"
+)
+
+// XOF defines the interface to hash functions that
+// support arbitrary-length output.
+type XOF interface {
+	// Write absorbs more data into the hash's state. It panics if called
+	// after Read.
+	io.Writer
+
+	// Read reads more output from the hash. It returns io.EOF if the limit
+	// has been reached.
+	io.Reader
+
+	// Clone returns a copy of the XOF in its current state.
+	Clone() XOF
+
+	// Reset resets the XOF to its initial state.
+	Reset()
+}
+
+// OutputLengthUnknown can be used as the size argument to NewXOF to indicate
+// the length of the output is not known in advance.
+const OutputLengthUnknown = 0
+
+// magicUnknownOutputLength is a magic value for the output size that indicates
+// an unknown number of output bytes.
+const magicUnknownOutputLength = (1 << 32) - 1
+
+// maxOutputLength is the absolute maximum number of bytes to produce when the
+// number of output bytes is unknown.
+const maxOutputLength = (1 << 32) * 64
+
+// NewXOF creates a new variable-output-length hash. The hash either produce a
+// known number of bytes (1 <= size < 2**32-1), or an unknown number of bytes
+// (size == OutputLengthUnknown). In the latter case, an absolute limit of
+// 256GiB applies.
+//
+// A non-nil key turns the hash into a MAC. The key must between
+// zero and 32 bytes long.
+func NewXOF(size uint32, key []byte) (XOF, error) {
+	if len(key) > Size {
+		return nil, errKeySize
+	}
+	if size == magicUnknownOutputLength {
+		// 2^32-1 indicates an unknown number of bytes and thus isn't a
+		// valid length.
+		return nil, errors.New("blake2b: XOF length too large")
+	}
+	if size == OutputLengthUnknown {
+		size = magicUnknownOutputLength
+	}
+	x := &xof{
+		d: digest{
+			size:   Size,
+			keyLen: len(key),
+		},
+		length: size,
+	}
+	copy(x.d.key[:], key)
+	x.Reset()
+	return x, nil
+}
+
+type xof struct {
+	d                digest
+	length           uint32
+	remaining        uint64
+	cfg, root, block [Size]byte
+	offset           int
+	nodeOffset       uint32
+	readMode         bool
+}
+
+func (x *xof) Write(p []byte) (n int, err error) {
+	if x.readMode {
+		panic("blake2b: write to XOF after read")
+	}
+	return x.d.Write(p)
+}
+
+func (x *xof) Clone() XOF {
+	clone := *x
+	return &clone
+}
+
+func (x *xof) Reset() {
+	x.cfg[0] = byte(Size)
+	binary.LittleEndian.PutUint32(x.cfg[4:], uint32(Size)) // leaf length
+	binary.LittleEndian.PutUint32(x.cfg[12:], x.length)    // XOF length
+	x.cfg[17] = byte(Size)                                 // inner hash size
+
+	x.d.Reset()
+	x.d.h[1] ^= uint64(x.length) << 32
+
+	x.remaining = uint64(x.length)
+	if x.remaining == magicUnknownOutputLength {
+		x.remaining = maxOutputLength
+	}
+	x.offset, x.nodeOffset = 0, 0
+	x.readMode = false
+}
+
+func (x *xof) Read(p []byte) (n int, err error) {
+	if !x.readMode {
+		x.d.finalize(&x.root)
+		x.readMode = true
+	}
+
+	if x.remaining == 0 {
+		return 0, io.EOF
+	}
+
+	n = len(p)
+	if uint64(n) > x.remaining {
+		n = int(x.remaining)
+		p = p[:n]
+	}
+
+	if x.offset > 0 {
+		blockRemaining := Size - x.offset
+		if n < blockRemaining {
+			x.offset += copy(p, x.block[x.offset:])
+			x.remaining -= uint64(n)
+			return
+		}
+		copy(p, x.block[x.offset:])
+		p = p[blockRemaining:]
+		x.offset = 0
+		x.remaining -= uint64(blockRemaining)
+	}
+
+	for len(p) >= Size {
+		binary.LittleEndian.PutUint32(x.cfg[8:], x.nodeOffset)
+		x.nodeOffset++
+
+		x.d.initConfig(&x.cfg)
+		x.d.Write(x.root[:])
+		x.d.finalize(&x.block)
+
+		copy(p, x.block[:])
+		p = p[Size:]
+		x.remaining -= uint64(Size)
+	}
+
+	if todo := len(p); todo > 0 {
+		if x.remaining < uint64(Size) {
+			x.cfg[0] = byte(x.remaining)
+		}
+		binary.LittleEndian.PutUint32(x.cfg[8:], x.nodeOffset)
+		x.nodeOffset++
+
+		x.d.initConfig(&x.cfg)
+		x.d.Write(x.root[:])
+		x.d.finalize(&x.block)
+
+		x.offset = copy(p, x.block[:todo])
+		x.remaining -= uint64(todo)
+	}
+	return
+}
+
+func (d *digest) initConfig(cfg *[Size]byte) {
+	d.offset, d.c[0], d.c[1] = 0, 0, 0
+	for i := range d.h {
+		d.h[i] = iv[i] ^ binary.LittleEndian.Uint64(cfg[i*8:])
+	}
+}

vendor/golang.org/x/crypto/blake2b/register.go

@@ -0,0 +1,30 @@
+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package blake2b
+
+import (
+	"crypto"
+	"hash"
+)
+
+func init() {
+	newHash256 := func() hash.Hash {
+		h, _ := New256(nil)
+		return h
+	}
+	newHash384 := func() hash.Hash {
+		h, _ := New384(nil)
+		return h
+	}
+
+	newHash512 := func() hash.Hash {
+		h, _ := New512(nil)
+		return h
+	}
+
+	crypto.RegisterHash(crypto.BLAKE2b_256, newHash256)
+	crypto.RegisterHash(crypto.BLAKE2b_384, newHash384)
+	crypto.RegisterHash(crypto.BLAKE2b_512, newHash512)
+}

vendor/golang.org/x/crypto/pbkdf2/pbkdf2.go

@@ -0,0 +1,77 @@
+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+/*
+Package pbkdf2 implements the key derivation function PBKDF2 as defined in RFC
+2898 / PKCS #5 v2.0.
+
+A key derivation function is useful when encrypting data based on a password
+or any other not-fully-random data. It uses a pseudorandom function to derive
+a secure encryption key based on the password.
+
+While v2.0 of the standard defines only one pseudorandom function to use,
+HMAC-SHA1, the drafted v2.1 specification allows use of all five FIPS Approved
+Hash Functions SHA-1, SHA-224, SHA-256, SHA-384 and SHA-512 for HMAC. To
+choose, you can pass the `New` functions from the different SHA packages to
+pbkdf2.Key.
+*/
+package pbkdf2
+
+import (
+	"crypto/hmac"
+	"hash"
+)
+
+// Key derives a key from the password, salt and iteration count, returning a
+// []byte of length keylen that can be used as cryptographic key. The key is
+// derived based on the method described as PBKDF2 with the HMAC variant using
+// the supplied hash function.
+//
+// For example, to use a HMAC-SHA-1 based PBKDF2 key derivation function, you
+// can get a derived key for e.g. AES-256 (which needs a 32-byte key) by
+// doing:
+//
+//	dk := pbkdf2.Key([]byte("some password"), salt, 4096, 32, sha1.New)
+//
+// Remember to get a good random salt. At least 8 bytes is recommended by the
+// RFC.
+//
+// Using a higher iteration count will increase the cost of an exhaustive
+// search but will also make derivation proportionally slower.
+func Key(password, salt []byte, iter, keyLen int, h func() hash.Hash) []byte {
+	prf := hmac.New(h, password)
+	hashLen := prf.Size()
+	numBlocks := (keyLen + hashLen - 1) / hashLen
+
+	var buf [4]byte
+	dk := make([]byte, 0, numBlocks*hashLen)
+	U := make([]byte, hashLen)
+	for block := 1; block <= numBlocks; block++ {
+		// N.B.: || means concatenation, ^ means XOR
+		// for each block T_i = U_1 ^ U_2 ^ ... ^ U_iter
+		// U_1 = PRF(password, salt || uint(i))
+		prf.Reset()
+		prf.Write(salt)
+		buf[0] = byte(block >> 24)
+		buf[1] = byte(block >> 16)
+		buf[2] = byte(block >> 8)
+		buf[3] = byte(block)
+		prf.Write(buf[:4])
+		dk = prf.Sum(dk)
+		T := dk[len(dk)-hashLen:]
+		copy(U, T)
+
+		// U_n = PRF(password, U_(n-1))
+		for n := 2; n <= iter; n++ {
+			prf.Reset()
+			prf.Write(U)
+			U = U[:0]
+			U = prf.Sum(U)
+			for x := range U {
+				T[x] ^= U[x]
+			}
+		}
+	}
+	return dk[:keyLen]
+}

vendor/golang.org/x/crypto/sha3/doc.go

@@ -0,0 +1,66 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package sha3 implements the SHA-3 fixed-output-length hash functions and
+// the SHAKE variable-output-length hash functions defined by FIPS-202.
+//
+// All types in this package also implement [encoding.BinaryMarshaler],
+// [encoding.BinaryAppender] and [encoding.BinaryUnmarshaler] to marshal and
+// unmarshal the internal state of the hash.
+//
+// Both types of hash function use the "sponge" construction and the Keccak
+// permutation. For a detailed specification see http://keccak.noekeon.org/
+//
+// # Guidance
+//
+// If you aren't sure what function you need, use SHAKE256 with at least 64
+// bytes of output. The SHAKE instances are faster than the SHA3 instances;
+// the latter have to allocate memory to conform to the hash.Hash interface.
+//
+// If you need a secret-key MAC (message authentication code), prepend the
+// secret key to the input, hash with SHAKE256 and read at least 32 bytes of
+// output.
+//
+// # Security strengths
+//
+// The SHA3-x (x equals 224, 256, 384, or 512) functions have a security
+// strength against preimage attacks of x bits. Since they only produce "x"
+// bits of output, their collision-resistance is only "x/2" bits.
+//
+// The SHAKE-256 and -128 functions have a generic security strength of 256 and
+// 128 bits against all attacks, provided that at least 2x bits of their output
+// is used.  Requesting more than 64 or 32 bytes of output, respectively, does
+// not increase the collision-resistance of the SHAKE functions.
+//
+// # The sponge construction
+//
+// A sponge builds a pseudo-random function from a public pseudo-random
+// permutation, by applying the permutation to a state of "rate + capacity"
+// bytes, but hiding "capacity" of the bytes.
+//
+// A sponge starts out with a zero state. To hash an input using a sponge, up
+// to "rate" bytes of the input are XORed into the sponge's state. The sponge
+// is then "full" and the permutation is applied to "empty" it. This process is
+// repeated until all the input has been "absorbed". The input is then padded.
+// The digest is "squeezed" from the sponge in the same way, except that output
+// is copied out instead of input being XORed in.
+//
+// A sponge is parameterized by its generic security strength, which is equal
+// to half its capacity; capacity + rate is equal to the permutation's width.
+// Since the KeccakF-1600 permutation is 1600 bits (200 bytes) wide, this means
+// that the security strength of a sponge instance is equal to (1600 - bitrate) / 2.
+//
+// # Recommendations
+//
+// The SHAKE functions are recommended for most new uses. They can produce
+// output of arbitrary length. SHAKE256, with an output length of at least
+// 64 bytes, provides 256-bit security against all attacks.  The Keccak team
+// recommends it for most applications upgrading from SHA2-512. (NIST chose a
+// much stronger, but much slower, sponge instance for SHA3-512.)
+//
+// The SHA-3 functions are "drop-in" replacements for the SHA-2 functions.
+// They produce output of the same length, with the same security strengths
+// against all attacks. This means, in particular, that SHA3-256 only has
+// 128-bit collision resistance, because its output length is 32 bytes.
+package sha3

vendor/golang.org/x/crypto/sha3/hashes.go

@@ -0,0 +1,128 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package sha3
+
+// This file provides functions for creating instances of the SHA-3
+// and SHAKE hash functions, as well as utility functions for hashing
+// bytes.
+
+import (
+	"crypto"
+	"hash"
+)
+
+// New224 creates a new SHA3-224 hash.
+// Its generic security strength is 224 bits against preimage attacks,
+// and 112 bits against collision attacks.
+func New224() hash.Hash {
+	return new224()
+}
+
+// New256 creates a new SHA3-256 hash.
+// Its generic security strength is 256 bits against preimage attacks,
+// and 128 bits against collision attacks.
+func New256() hash.Hash {
+	return new256()
+}
+
+// New384 creates a new SHA3-384 hash.
+// Its generic security strength is 384 bits against preimage attacks,
+// and 192 bits against collision attacks.
+func New384() hash.Hash {
+	return new384()
+}
+
+// New512 creates a new SHA3-512 hash.
+// Its generic security strength is 512 bits against preimage attacks,
+// and 256 bits against collision attacks.
+func New512() hash.Hash {
+	return new512()
+}
+
+func init() {
+	crypto.RegisterHash(crypto.SHA3_224, New224)
+	crypto.RegisterHash(crypto.SHA3_256, New256)
+	crypto.RegisterHash(crypto.SHA3_384, New384)
+	crypto.RegisterHash(crypto.SHA3_512, New512)
+}
+
+const (
+	dsbyteSHA3   = 0b00000110
+	dsbyteKeccak = 0b00000001
+	dsbyteShake  = 0b00011111
+	dsbyteCShake = 0b00000100
+
+	// rateK[c] is the rate in bytes for Keccak[c] where c is the capacity in
+	// bits. Given the sponge size is 1600 bits, the rate is 1600 - c bits.
+	rateK256  = (1600 - 256) / 8
+	rateK448  = (1600 - 448) / 8
+	rateK512  = (1600 - 512) / 8
+	rateK768  = (1600 - 768) / 8
+	rateK1024 = (1600 - 1024) / 8
+)
+
+func new224Generic() *state {
+	return &state{rate: rateK448, outputLen: 28, dsbyte: dsbyteSHA3}
+}
+
+func new256Generic() *state {
+	return &state{rate: rateK512, outputLen: 32, dsbyte: dsbyteSHA3}
+}
+
+func new384Generic() *state {
+	return &state{rate: rateK768, outputLen: 48, dsbyte: dsbyteSHA3}
+}
+
+func new512Generic() *state {
+	return &state{rate: rateK1024, outputLen: 64, dsbyte: dsbyteSHA3}
+}
+
+// NewLegacyKeccak256 creates a new Keccak-256 hash.
+//
+// Only use this function if you require compatibility with an existing cryptosystem
+// that uses non-standard padding. All other users should use New256 instead.
+func NewLegacyKeccak256() hash.Hash {
+	return &state{rate: rateK512, outputLen: 32, dsbyte: dsbyteKeccak}
+}
+
+// NewLegacyKeccak512 creates a new Keccak-512 hash.
+//
+// Only use this function if you require compatibility with an existing cryptosystem
+// that uses non-standard padding. All other users should use New512 instead.
+func NewLegacyKeccak512() hash.Hash {
+	return &state{rate: rateK1024, outputLen: 64, dsbyte: dsbyteKeccak}
+}
+
+// Sum224 returns the SHA3-224 digest of the data.
+func Sum224(data []byte) (digest [28]byte) {
+	h := New224()
+	h.Write(data)
+	h.Sum(digest[:0])
+	return
+}
+
+// Sum256 returns the SHA3-256 digest of the data.
+func Sum256(data []byte) (digest [32]byte) {
+	h := New256()
+	h.Write(data)
+	h.Sum(digest[:0])
+	return
+}
+
+// Sum384 returns the SHA3-384 digest of the data.
+func Sum384(data []byte) (digest [48]byte) {
+	h := New384()
+	h.Write(data)
+	h.Sum(digest[:0])
+	return
+}
+
+// Sum512 returns the SHA3-512 digest of the data.
+func Sum512(data []byte) (digest [64]byte) {
+	h := New512()
+	h.Write(data)
+	h.Sum(digest[:0])
+	return
+}

vendor/golang.org/x/crypto/sha3/hashes_noasm.go

@@ -0,0 +1,23 @@
+// Copyright 2023 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build !gc || purego || !s390x
+
+package sha3
+
+func new224() *state {
+	return new224Generic()
+}
+
+func new256() *state {
+	return new256Generic()
+}
+
+func new384() *state {
+	return new384Generic()
+}
+
+func new512() *state {
+	return new512Generic()
+}

vendor/golang.org/x/crypto/sha3/keccakf.go

@@ -0,0 +1,414 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build !amd64 || purego || !gc
+
+package sha3
+
+import "math/bits"
+
+// rc stores the round constants for use in the ι step.
+var rc = [24]uint64{
+	0x0000000000000001,
+	0x0000000000008082,
+	0x800000000000808A,
+	0x8000000080008000,
+	0x000000000000808B,
+	0x0000000080000001,
+	0x8000000080008081,
+	0x8000000000008009,
+	0x000000000000008A,
+	0x0000000000000088,
+	0x0000000080008009,
+	0x000000008000000A,
+	0x000000008000808B,
+	0x800000000000008B,
+	0x8000000000008089,
+	0x8000000000008003,
+	0x8000000000008002,
+	0x8000000000000080,
+	0x000000000000800A,
+	0x800000008000000A,
+	0x8000000080008081,
+	0x8000000000008080,
+	0x0000000080000001,
+	0x8000000080008008,
+}
+
+// keccakF1600 applies the Keccak permutation to a 1600b-wide
+// state represented as a slice of 25 uint64s.
+func keccakF1600(a *[25]uint64) {
+	// Implementation translated from Keccak-inplace.c
+	// in the keccak reference code.
+	var t, bc0, bc1, bc2, bc3, bc4, d0, d1, d2, d3, d4 uint64
+
+	for i := 0; i < 24; i += 4 {
+		// Combines the 5 steps in each round into 2 steps.
+		// Unrolls 4 rounds per loop and spreads some steps across rounds.
+
+		// Round 1
+		bc0 = a[0] ^ a[5] ^ a[10] ^ a[15] ^ a[20]
+		bc1 = a[1] ^ a[6] ^ a[11] ^ a[16] ^ a[21]
+		bc2 = a[2] ^ a[7] ^ a[12] ^ a[17] ^ a[22]
+		bc3 = a[3] ^ a[8] ^ a[13] ^ a[18] ^ a[23]
+		bc4 = a[4] ^ a[9] ^ a[14] ^ a[19] ^ a[24]
+		d0 = bc4 ^ (bc1<<1 | bc1>>63)
+		d1 = bc0 ^ (bc2<<1 | bc2>>63)
+		d2 = bc1 ^ (bc3<<1 | bc3>>63)
+		d3 = bc2 ^ (bc4<<1 | bc4>>63)
+		d4 = bc3 ^ (bc0<<1 | bc0>>63)
+
+		bc0 = a[0] ^ d0
+		t = a[6] ^ d1
+		bc1 = bits.RotateLeft64(t, 44)
+		t = a[12] ^ d2
+		bc2 = bits.RotateLeft64(t, 43)
+		t = a[18] ^ d3
+		bc3 = bits.RotateLeft64(t, 21)
+		t = a[24] ^ d4
+		bc4 = bits.RotateLeft64(t, 14)
+		a[0] = bc0 ^ (bc2 &^ bc1) ^ rc[i]
+		a[6] = bc1 ^ (bc3 &^ bc2)
+		a[12] = bc2 ^ (bc4 &^ bc3)
+		a[18] = bc3 ^ (bc0 &^ bc4)
+		a[24] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[10] ^ d0
+		bc2 = bits.RotateLeft64(t, 3)
+		t = a[16] ^ d1
+		bc3 = bits.RotateLeft64(t, 45)
+		t = a[22] ^ d2
+		bc4 = bits.RotateLeft64(t, 61)
+		t = a[3] ^ d3
+		bc0 = bits.RotateLeft64(t, 28)
+		t = a[9] ^ d4
+		bc1 = bits.RotateLeft64(t, 20)
+		a[10] = bc0 ^ (bc2 &^ bc1)
+		a[16] = bc1 ^ (bc3 &^ bc2)
+		a[22] = bc2 ^ (bc4 &^ bc3)
+		a[3] = bc3 ^ (bc0 &^ bc4)
+		a[9] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[20] ^ d0
+		bc4 = bits.RotateLeft64(t, 18)
+		t = a[1] ^ d1
+		bc0 = bits.RotateLeft64(t, 1)
+		t = a[7] ^ d2
+		bc1 = bits.RotateLeft64(t, 6)
+		t = a[13] ^ d3
+		bc2 = bits.RotateLeft64(t, 25)
+		t = a[19] ^ d4
+		bc3 = bits.RotateLeft64(t, 8)
+		a[20] = bc0 ^ (bc2 &^ bc1)
+		a[1] = bc1 ^ (bc3 &^ bc2)
+		a[7] = bc2 ^ (bc4 &^ bc3)
+		a[13] = bc3 ^ (bc0 &^ bc4)
+		a[19] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[5] ^ d0
+		bc1 = bits.RotateLeft64(t, 36)
+		t = a[11] ^ d1
+		bc2 = bits.RotateLeft64(t, 10)
+		t = a[17] ^ d2
+		bc3 = bits.RotateLeft64(t, 15)
+		t = a[23] ^ d3
+		bc4 = bits.RotateLeft64(t, 56)
+		t = a[4] ^ d4
+		bc0 = bits.RotateLeft64(t, 27)
+		a[5] = bc0 ^ (bc2 &^ bc1)
+		a[11] = bc1 ^ (bc3 &^ bc2)
+		a[17] = bc2 ^ (bc4 &^ bc3)
+		a[23] = bc3 ^ (bc0 &^ bc4)
+		a[4] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[15] ^ d0
+		bc3 = bits.RotateLeft64(t, 41)
+		t = a[21] ^ d1
+		bc4 = bits.RotateLeft64(t, 2)
+		t = a[2] ^ d2
+		bc0 = bits.RotateLeft64(t, 62)
+		t = a[8] ^ d3
+		bc1 = bits.RotateLeft64(t, 55)
+		t = a[14] ^ d4
+		bc2 = bits.RotateLeft64(t, 39)
+		a[15] = bc0 ^ (bc2 &^ bc1)
+		a[21] = bc1 ^ (bc3 &^ bc2)
+		a[2] = bc2 ^ (bc4 &^ bc3)
+		a[8] = bc3 ^ (bc0 &^ bc4)
+		a[14] = bc4 ^ (bc1 &^ bc0)
+
+		// Round 2
+		bc0 = a[0] ^ a[5] ^ a[10] ^ a[15] ^ a[20]
+		bc1 = a[1] ^ a[6] ^ a[11] ^ a[16] ^ a[21]
+		bc2 = a[2] ^ a[7] ^ a[12] ^ a[17] ^ a[22]
+		bc3 = a[3] ^ a[8] ^ a[13] ^ a[18] ^ a[23]
+		bc4 = a[4] ^ a[9] ^ a[14] ^ a[19] ^ a[24]
+		d0 = bc4 ^ (bc1<<1 | bc1>>63)
+		d1 = bc0 ^ (bc2<<1 | bc2>>63)
+		d2 = bc1 ^ (bc3<<1 | bc3>>63)
+		d3 = bc2 ^ (bc4<<1 | bc4>>63)
+		d4 = bc3 ^ (bc0<<1 | bc0>>63)
+
+		bc0 = a[0] ^ d0
+		t = a[16] ^ d1
+		bc1 = bits.RotateLeft64(t, 44)
+		t = a[7] ^ d2
+		bc2 = bits.RotateLeft64(t, 43)
+		t = a[23] ^ d3
+		bc3 = bits.RotateLeft64(t, 21)
+		t = a[14] ^ d4
+		bc4 = bits.RotateLeft64(t, 14)
+		a[0] = bc0 ^ (bc2 &^ bc1) ^ rc[i+1]
+		a[16] = bc1 ^ (bc3 &^ bc2)
+		a[7] = bc2 ^ (bc4 &^ bc3)
+		a[23] = bc3 ^ (bc0 &^ bc4)
+		a[14] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[20] ^ d0
+		bc2 = bits.RotateLeft64(t, 3)
+		t = a[11] ^ d1
+		bc3 = bits.RotateLeft64(t, 45)
+		t = a[2] ^ d2
+		bc4 = bits.RotateLeft64(t, 61)
+		t = a[18] ^ d3
+		bc0 = bits.RotateLeft64(t, 28)
+		t = a[9] ^ d4
+		bc1 = bits.RotateLeft64(t, 20)
+		a[20] = bc0 ^ (bc2 &^ bc1)
+		a[11] = bc1 ^ (bc3 &^ bc2)
+		a[2] = bc2 ^ (bc4 &^ bc3)
+		a[18] = bc3 ^ (bc0 &^ bc4)
+		a[9] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[15] ^ d0
+		bc4 = bits.RotateLeft64(t, 18)
+		t = a[6] ^ d1
+		bc0 = bits.RotateLeft64(t, 1)
+		t = a[22] ^ d2
+		bc1 = bits.RotateLeft64(t, 6)
+		t = a[13] ^ d3
+		bc2 = bits.RotateLeft64(t, 25)
+		t = a[4] ^ d4
+		bc3 = bits.RotateLeft64(t, 8)
+		a[15] = bc0 ^ (bc2 &^ bc1)
+		a[6] = bc1 ^ (bc3 &^ bc2)
+		a[22] = bc2 ^ (bc4 &^ bc3)
+		a[13] = bc3 ^ (bc0 &^ bc4)
+		a[4] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[10] ^ d0
+		bc1 = bits.RotateLeft64(t, 36)
+		t = a[1] ^ d1
+		bc2 = bits.RotateLeft64(t, 10)
+		t = a[17] ^ d2
+		bc3 = bits.RotateLeft64(t, 15)
+		t = a[8] ^ d3
+		bc4 = bits.RotateLeft64(t, 56)
+		t = a[24] ^ d4
+		bc0 = bits.RotateLeft64(t, 27)
+		a[10] = bc0 ^ (bc2 &^ bc1)
+		a[1] = bc1 ^ (bc3 &^ bc2)
+		a[17] = bc2 ^ (bc4 &^ bc3)
+		a[8] = bc3 ^ (bc0 &^ bc4)
+		a[24] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[5] ^ d0
+		bc3 = bits.RotateLeft64(t, 41)
+		t = a[21] ^ d1
+		bc4 = bits.RotateLeft64(t, 2)
+		t = a[12] ^ d2
+		bc0 = bits.RotateLeft64(t, 62)
+		t = a[3] ^ d3
+		bc1 = bits.RotateLeft64(t, 55)
+		t = a[19] ^ d4
+		bc2 = bits.RotateLeft64(t, 39)
+		a[5] = bc0 ^ (bc2 &^ bc1)
+		a[21] = bc1 ^ (bc3 &^ bc2)
+		a[12] = bc2 ^ (bc4 &^ bc3)
+		a[3] = bc3 ^ (bc0 &^ bc4)
+		a[19] = bc4 ^ (bc1 &^ bc0)
+
+		// Round 3
+		bc0 = a[0] ^ a[5] ^ a[10] ^ a[15] ^ a[20]
+		bc1 = a[1] ^ a[6] ^ a[11] ^ a[16] ^ a[21]
+		bc2 = a[2] ^ a[7] ^ a[12] ^ a[17] ^ a[22]
+		bc3 = a[3] ^ a[8] ^ a[13] ^ a[18] ^ a[23]
+		bc4 = a[4] ^ a[9] ^ a[14] ^ a[19] ^ a[24]
+		d0 = bc4 ^ (bc1<<1 | bc1>>63)
+		d1 = bc0 ^ (bc2<<1 | bc2>>63)
+		d2 = bc1 ^ (bc3<<1 | bc3>>63)
+		d3 = bc2 ^ (bc4<<1 | bc4>>63)
+		d4 = bc3 ^ (bc0<<1 | bc0>>63)
+
+		bc0 = a[0] ^ d0
+		t = a[11] ^ d1
+		bc1 = bits.RotateLeft64(t, 44)
+		t = a[22] ^ d2
+		bc2 = bits.RotateLeft64(t, 43)
+		t = a[8] ^ d3
+		bc3 = bits.RotateLeft64(t, 21)
+		t = a[19] ^ d4
+		bc4 = bits.RotateLeft64(t, 14)
+		a[0] = bc0 ^ (bc2 &^ bc1) ^ rc[i+2]
+		a[11] = bc1 ^ (bc3 &^ bc2)
+		a[22] = bc2 ^ (bc4 &^ bc3)
+		a[8] = bc3 ^ (bc0 &^ bc4)
+		a[19] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[15] ^ d0
+		bc2 = bits.RotateLeft64(t, 3)
+		t = a[1] ^ d1
+		bc3 = bits.RotateLeft64(t, 45)
+		t = a[12] ^ d2
+		bc4 = bits.RotateLeft64(t, 61)
+		t = a[23] ^ d3
+		bc0 = bits.RotateLeft64(t, 28)
+		t = a[9] ^ d4
+		bc1 = bits.RotateLeft64(t, 20)
+		a[15] = bc0 ^ (bc2 &^ bc1)
+		a[1] = bc1 ^ (bc3 &^ bc2)
+		a[12] = bc2 ^ (bc4 &^ bc3)
+		a[23] = bc3 ^ (bc0 &^ bc4)
+		a[9] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[5] ^ d0
+		bc4 = bits.RotateLeft64(t, 18)
+		t = a[16] ^ d1
+		bc0 = bits.RotateLeft64(t, 1)
+		t = a[2] ^ d2
+		bc1 = bits.RotateLeft64(t, 6)
+		t = a[13] ^ d3
+		bc2 = bits.RotateLeft64(t, 25)
+		t = a[24] ^ d4
+		bc3 = bits.RotateLeft64(t, 8)
+		a[5] = bc0 ^ (bc2 &^ bc1)
+		a[16] = bc1 ^ (bc3 &^ bc2)
+		a[2] = bc2 ^ (bc4 &^ bc3)
+		a[13] = bc3 ^ (bc0 &^ bc4)
+		a[24] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[20] ^ d0
+		bc1 = bits.RotateLeft64(t, 36)
+		t = a[6] ^ d1
+		bc2 = bits.RotateLeft64(t, 10)
+		t = a[17] ^ d2
+		bc3 = bits.RotateLeft64(t, 15)
+		t = a[3] ^ d3
+		bc4 = bits.RotateLeft64(t, 56)
+		t = a[14] ^ d4
+		bc0 = bits.RotateLeft64(t, 27)
+		a[20] = bc0 ^ (bc2 &^ bc1)
+		a[6] = bc1 ^ (bc3 &^ bc2)
+		a[17] = bc2 ^ (bc4 &^ bc3)
+		a[3] = bc3 ^ (bc0 &^ bc4)
+		a[14] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[10] ^ d0
+		bc3 = bits.RotateLeft64(t, 41)
+		t = a[21] ^ d1
+		bc4 = bits.RotateLeft64(t, 2)
+		t = a[7] ^ d2
+		bc0 = bits.RotateLeft64(t, 62)
+		t = a[18] ^ d3
+		bc1 = bits.RotateLeft64(t, 55)
+		t = a[4] ^ d4
+		bc2 = bits.RotateLeft64(t, 39)
+		a[10] = bc0 ^ (bc2 &^ bc1)
+		a[21] = bc1 ^ (bc3 &^ bc2)
+		a[7] = bc2 ^ (bc4 &^ bc3)
+		a[18] = bc3 ^ (bc0 &^ bc4)
+		a[4] = bc4 ^ (bc1 &^ bc0)
+
+		// Round 4
+		bc0 = a[0] ^ a[5] ^ a[10] ^ a[15] ^ a[20]
+		bc1 = a[1] ^ a[6] ^ a[11] ^ a[16] ^ a[21]
+		bc2 = a[2] ^ a[7] ^ a[12] ^ a[17] ^ a[22]
+		bc3 = a[3] ^ a[8] ^ a[13] ^ a[18] ^ a[23]
+		bc4 = a[4] ^ a[9] ^ a[14] ^ a[19] ^ a[24]
+		d0 = bc4 ^ (bc1<<1 | bc1>>63)
+		d1 = bc0 ^ (bc2<<1 | bc2>>63)
+		d2 = bc1 ^ (bc3<<1 | bc3>>63)
+		d3 = bc2 ^ (bc4<<1 | bc4>>63)
+		d4 = bc3 ^ (bc0<<1 | bc0>>63)
+
+		bc0 = a[0] ^ d0
+		t = a[1] ^ d1
+		bc1 = bits.RotateLeft64(t, 44)
+		t = a[2] ^ d2
+		bc2 = bits.RotateLeft64(t, 43)
+		t = a[3] ^ d3
+		bc3 = bits.RotateLeft64(t, 21)
+		t = a[4] ^ d4
+		bc4 = bits.RotateLeft64(t, 14)
+		a[0] = bc0 ^ (bc2 &^ bc1) ^ rc[i+3]
+		a[1] = bc1 ^ (bc3 &^ bc2)
+		a[2] = bc2 ^ (bc4 &^ bc3)
+		a[3] = bc3 ^ (bc0 &^ bc4)
+		a[4] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[5] ^ d0
+		bc2 = bits.RotateLeft64(t, 3)
+		t = a[6] ^ d1
+		bc3 = bits.RotateLeft64(t, 45)
+		t = a[7] ^ d2
+		bc4 = bits.RotateLeft64(t, 61)
+		t = a[8] ^ d3
+		bc0 = bits.RotateLeft64(t, 28)
+		t = a[9] ^ d4
+		bc1 = bits.RotateLeft64(t, 20)
+		a[5] = bc0 ^ (bc2 &^ bc1)
+		a[6] = bc1 ^ (bc3 &^ bc2)
+		a[7] = bc2 ^ (bc4 &^ bc3)
+		a[8] = bc3 ^ (bc0 &^ bc4)
+		a[9] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[10] ^ d0
+		bc4 = bits.RotateLeft64(t, 18)
+		t = a[11] ^ d1
+		bc0 = bits.RotateLeft64(t, 1)
+		t = a[12] ^ d2
+		bc1 = bits.RotateLeft64(t, 6)
+		t = a[13] ^ d3
+		bc2 = bits.RotateLeft64(t, 25)
+		t = a[14] ^ d4
+		bc3 = bits.RotateLeft64(t, 8)
+		a[10] = bc0 ^ (bc2 &^ bc1)
+		a[11] = bc1 ^ (bc3 &^ bc2)
+		a[12] = bc2 ^ (bc4 &^ bc3)
+		a[13] = bc3 ^ (bc0 &^ bc4)
+		a[14] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[15] ^ d0
+		bc1 = bits.RotateLeft64(t, 36)
+		t = a[16] ^ d1
+		bc2 = bits.RotateLeft64(t, 10)
+		t = a[17] ^ d2
+		bc3 = bits.RotateLeft64(t, 15)
+		t = a[18] ^ d3
+		bc4 = bits.RotateLeft64(t, 56)
+		t = a[19] ^ d4
+		bc0 = bits.RotateLeft64(t, 27)
+		a[15] = bc0 ^ (bc2 &^ bc1)
+		a[16] = bc1 ^ (bc3 &^ bc2)
+		a[17] = bc2 ^ (bc4 &^ bc3)
+		a[18] = bc3 ^ (bc0 &^ bc4)
+		a[19] = bc4 ^ (bc1 &^ bc0)
+
+		t = a[20] ^ d0
+		bc3 = bits.RotateLeft64(t, 41)
+		t = a[21] ^ d1
+		bc4 = bits.RotateLeft64(t, 2)
+		t = a[22] ^ d2
+		bc0 = bits.RotateLeft64(t, 62)
+		t = a[23] ^ d3
+		bc1 = bits.RotateLeft64(t, 55)
+		t = a[24] ^ d4
+		bc2 = bits.RotateLeft64(t, 39)
+		a[20] = bc0 ^ (bc2 &^ bc1)
+		a[21] = bc1 ^ (bc3 &^ bc2)
+		a[22] = bc2 ^ (bc4 &^ bc3)
+		a[23] = bc3 ^ (bc0 &^ bc4)
+		a[24] = bc4 ^ (bc1 &^ bc0)
+	}
+}

vendor/golang.org/x/crypto/sha3/keccakf_amd64.go

@@ -0,0 +1,13 @@
+// Copyright 2015 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build amd64 && !purego && gc
+
+package sha3
+
+// This function is implemented in keccakf_amd64.s.
+
+//go:noescape
+
+func keccakF1600(a *[25]uint64)

vendor/golang.org/x/crypto/sha3/sha3.go

@@ -0,0 +1,244 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package sha3
+
+import (
+	"crypto/subtle"
+	"encoding/binary"
+	"errors"
+	"unsafe"
+
+	"golang.org/x/sys/cpu"
+)
+
+// spongeDirection indicates the direction bytes are flowing through the sponge.
+type spongeDirection int
+
+const (
+	// spongeAbsorbing indicates that the sponge is absorbing input.
+	spongeAbsorbing spongeDirection = iota
+	// spongeSqueezing indicates that the sponge is being squeezed.
+	spongeSqueezing
+)
+
+type state struct {
+	a [1600 / 8]byte // main state of the hash
+
+	// a[n:rate] is the buffer. If absorbing, it's the remaining space to XOR
+	// into before running the permutation. If squeezing, it's the remaining
+	// output to produce before running the permutation.
+	n, rate int
+
+	// dsbyte contains the "domain separation" bits and the first bit of
+	// the padding. Sections 6.1 and 6.2 of [1] separate the outputs of the
+	// SHA-3 and SHAKE functions by appending bitstrings to the message.
+	// Using a little-endian bit-ordering convention, these are "01" for SHA-3
+	// and "1111" for SHAKE, or 00000010b and 00001111b, respectively. Then the
+	// padding rule from section 5.1 is applied to pad the message to a multiple
+	// of the rate, which involves adding a "1" bit, zero or more "0" bits, and
+	// a final "1" bit. We merge the first "1" bit from the padding into dsbyte,
+	// giving 00000110b (0x06) and 00011111b (0x1f).
+	// [1] http://csrc.nist.gov/publications/drafts/fips-202/fips_202_draft.pdf
+	//     "Draft FIPS 202: SHA-3 Standard: Permutation-Based Hash and
+	//      Extendable-Output Functions (May 2014)"
+	dsbyte byte
+
+	outputLen int             // the default output size in bytes
+	state     spongeDirection // whether the sponge is absorbing or squeezing
+}
+
+// BlockSize returns the rate of sponge underlying this hash function.
+func (d *state) BlockSize() int { return d.rate }
+
+// Size returns the output size of the hash function in bytes.
+func (d *state) Size() int { return d.outputLen }
+
+// Reset clears the internal state by zeroing the sponge state and
+// the buffer indexes, and setting Sponge.state to absorbing.
+func (d *state) Reset() {
+	// Zero the permutation's state.
+	for i := range d.a {
+		d.a[i] = 0
+	}
+	d.state = spongeAbsorbing
+	d.n = 0
+}
+
+func (d *state) clone() *state {
+	ret := *d
+	return &ret
+}
+
+// permute applies the KeccakF-1600 permutation.
+func (d *state) permute() {
+	var a *[25]uint64
+	if cpu.IsBigEndian {
+		a = new([25]uint64)
+		for i := range a {
+			a[i] = binary.LittleEndian.Uint64(d.a[i*8:])
+		}
+	} else {
+		a = (*[25]uint64)(unsafe.Pointer(&d.a))
+	}
+
+	keccakF1600(a)
+	d.n = 0
+
+	if cpu.IsBigEndian {
+		for i := range a {
+			binary.LittleEndian.PutUint64(d.a[i*8:], a[i])
+		}
+	}
+}
+
+// pads appends the domain separation bits in dsbyte, applies
+// the multi-bitrate 10..1 padding rule, and permutes the state.
+func (d *state) padAndPermute() {
+	// Pad with this instance's domain-separator bits. We know that there's
+	// at least one byte of space in the sponge because, if it were full,
+	// permute would have been called to empty it. dsbyte also contains the
+	// first one bit for the padding. See the comment in the state struct.
+	d.a[d.n] ^= d.dsbyte
+	// This adds the final one bit for the padding. Because of the way that
+	// bits are numbered from the LSB upwards, the final bit is the MSB of
+	// the last byte.
+	d.a[d.rate-1] ^= 0x80
+	// Apply the permutation
+	d.permute()
+	d.state = spongeSqueezing
+}
+
+// Write absorbs more data into the hash's state. It panics if any
+// output has already been read.
+func (d *state) Write(p []byte) (n int, err error) {
+	if d.state != spongeAbsorbing {
+		panic("sha3: Write after Read")
+	}
+
+	n = len(p)
+
+	for len(p) > 0 {
+		x := subtle.XORBytes(d.a[d.n:d.rate], d.a[d.n:d.rate], p)
+		d.n += x
+		p = p[x:]
+
+		// If the sponge is full, apply the permutation.
+		if d.n == d.rate {
+			d.permute()
+		}
+	}
+
+	return
+}
+
+// Read squeezes an arbitrary number of bytes from the sponge.
+func (d *state) Read(out []byte) (n int, err error) {
+	// If we're still absorbing, pad and apply the permutation.
+	if d.state == spongeAbsorbing {
+		d.padAndPermute()
+	}
+
+	n = len(out)
+
+	// Now, do the squeezing.
+	for len(out) > 0 {
+		// Apply the permutation if we've squeezed the sponge dry.
+		if d.n == d.rate {
+			d.permute()
+		}
+
+		x := copy(out, d.a[d.n:d.rate])
+		d.n += x
+		out = out[x:]
+	}
+
+	return
+}
+
+// Sum applies padding to the hash state and then squeezes out the desired
+// number of output bytes. It panics if any output has already been read.
+func (d *state) Sum(in []byte) []byte {
+	if d.state != spongeAbsorbing {
+		panic("sha3: Sum after Read")
+	}
+
+	// Make a copy of the original hash so that caller can keep writing
+	// and summing.
+	dup := d.clone()
+	hash := make([]byte, dup.outputLen, 64) // explicit cap to allow stack allocation
+	dup.Read(hash)
+	return append(in, hash...)
+}
+
+const (
+	magicSHA3   = "sha\x08"
+	magicShake  = "sha\x09"
+	magicCShake = "sha\x0a"
+	magicKeccak = "sha\x0b"
+	// magic || rate || main state || n || sponge direction
+	marshaledSize = len(magicSHA3) + 1 + 200 + 1 + 1
+)
+
+func (d *state) MarshalBinary() ([]byte, error) {
+	return d.AppendBinary(make([]byte, 0, marshaledSize))
+}
+
+func (d *state) AppendBinary(b []byte) ([]byte, error) {
+	switch d.dsbyte {
+	case dsbyteSHA3:
+		b = append(b, magicSHA3...)
+	case dsbyteShake:
+		b = append(b, magicShake...)
+	case dsbyteCShake:
+		b = append(b, magicCShake...)
+	case dsbyteKeccak:
+		b = append(b, magicKeccak...)
+	default:
+		panic("unknown dsbyte")
+	}
+	// rate is at most 168, and n is at most rate.
+	b = append(b, byte(d.rate))
+	b = append(b, d.a[:]...)
+	b = append(b, byte(d.n), byte(d.state))
+	return b, nil
+}
+
+func (d *state) UnmarshalBinary(b []byte) error {
+	if len(b) != marshaledSize {
+		return errors.New("sha3: invalid hash state")
+	}
+
+	magic := string(b[:len(magicSHA3)])
+	b = b[len(magicSHA3):]
+	switch {
+	case magic == magicSHA3 && d.dsbyte == dsbyteSHA3:
+	case magic == magicShake && d.dsbyte == dsbyteShake:
+	case magic == magicCShake && d.dsbyte == dsbyteCShake:
+	case magic == magicKeccak && d.dsbyte == dsbyteKeccak:
+	default:
+		return errors.New("sha3: invalid hash state identifier")
+	}
+
+	rate := int(b[0])
+	b = b[1:]
+	if rate != d.rate {
+		return errors.New("sha3: invalid hash state function")
+	}
+
+	copy(d.a[:], b)
+	b = b[len(d.a):]
+
+	n, state := int(b[0]), spongeDirection(b[1])
+	if n > d.rate {
+		return errors.New("sha3: invalid hash state")
+	}
+	d.n = n
+	if state != spongeAbsorbing && state != spongeSqueezing {
+		return errors.New("sha3: invalid hash state")
+	}
+	d.state = state
+
+	return nil
+}

vendor/golang.org/x/crypto/sha3/sha3_s390x.go

@@ -0,0 +1,303 @@
+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build gc && !purego
+
+package sha3
+
+// This file contains code for using the 'compute intermediate
+// message digest' (KIMD) and 'compute last message digest' (KLMD)
+// instructions to compute SHA-3 and SHAKE hashes on IBM Z.
+
+import (
+	"hash"
+
+	"golang.org/x/sys/cpu"
+)
+
+// codes represent 7-bit KIMD/KLMD function codes as defined in
+// the Principles of Operation.
+type code uint64
+
+const (
+	// function codes for KIMD/KLMD
+	sha3_224  code = 32
+	sha3_256       = 33
+	sha3_384       = 34
+	sha3_512       = 35
+	shake_128      = 36
+	shake_256      = 37
+	nopad          = 0x100
+)
+
+// kimd is a wrapper for the 'compute intermediate message digest' instruction.
+// src must be a multiple of the rate for the given function code.
+//
+//go:noescape
+func kimd(function code, chain *[200]byte, src []byte)
+
+// klmd is a wrapper for the 'compute last message digest' instruction.
+// src padding is handled by the instruction.
+//
+//go:noescape
+func klmd(function code, chain *[200]byte, dst, src []byte)
+
+type asmState struct {
+	a         [200]byte       // 1600 bit state
+	buf       []byte          // care must be taken to ensure cap(buf) is a multiple of rate
+	rate      int             // equivalent to block size
+	storage   [3072]byte      // underlying storage for buf
+	outputLen int             // output length for full security
+	function  code            // KIMD/KLMD function code
+	state     spongeDirection // whether the sponge is absorbing or squeezing
+}
+
+func newAsmState(function code) *asmState {
+	var s asmState
+	s.function = function
+	switch function {
+	case sha3_224:
+		s.rate = 144
+		s.outputLen = 28
+	case sha3_256:
+		s.rate = 136
+		s.outputLen = 32
+	case sha3_384:
+		s.rate = 104
+		s.outputLen = 48
+	case sha3_512:
+		s.rate = 72
+		s.outputLen = 64
+	case shake_128:
+		s.rate = 168
+		s.outputLen = 32
+	case shake_256:
+		s.rate = 136
+		s.outputLen = 64
+	default:
+		panic("sha3: unrecognized function code")
+	}
+
+	// limit s.buf size to a multiple of s.rate
+	s.resetBuf()
+	return &s
+}
+
+func (s *asmState) clone() *asmState {
+	c := *s
+	c.buf = c.storage[:len(s.buf):cap(s.buf)]
+	return &c
+}
+
+// copyIntoBuf copies b into buf. It will panic if there is not enough space to
+// store all of b.
+func (s *asmState) copyIntoBuf(b []byte) {
+	bufLen := len(s.buf)
+	s.buf = s.buf[:len(s.buf)+len(b)]
+	copy(s.buf[bufLen:], b)
+}
+
+// resetBuf points buf at storage, sets the length to 0 and sets cap to be a
+// multiple of the rate.
+func (s *asmState) resetBuf() {
+	max := (cap(s.storage) / s.rate) * s.rate
+	s.buf = s.storage[:0:max]
+}
+
+// Write (via the embedded io.Writer interface) adds more data to the running hash.
+// It never returns an error.
+func (s *asmState) Write(b []byte) (int, error) {
+	if s.state != spongeAbsorbing {
+		panic("sha3: Write after Read")
+	}
+	length := len(b)
+	for len(b) > 0 {
+		if len(s.buf) == 0 && len(b) >= cap(s.buf) {
+			// Hash the data directly and push any remaining bytes
+			// into the buffer.
+			remainder := len(b) % s.rate
+			kimd(s.function, &s.a, b[:len(b)-remainder])
+			if remainder != 0 {
+				s.copyIntoBuf(b[len(b)-remainder:])
+			}
+			return length, nil
+		}
+
+		if len(s.buf) == cap(s.buf) {
+			// flush the buffer
+			kimd(s.function, &s.a, s.buf)
+			s.buf = s.buf[:0]
+		}
+
+		// copy as much as we can into the buffer
+		n := len(b)
+		if len(b) > cap(s.buf)-len(s.buf) {
+			n = cap(s.buf) - len(s.buf)
+		}
+		s.copyIntoBuf(b[:n])
+		b = b[n:]
+	}
+	return length, nil
+}
+
+// Read squeezes an arbitrary number of bytes from the sponge.
+func (s *asmState) Read(out []byte) (n int, err error) {
+	// The 'compute last message digest' instruction only stores the digest
+	// at the first operand (dst) for SHAKE functions.
+	if s.function != shake_128 && s.function != shake_256 {
+		panic("sha3: can only call Read for SHAKE functions")
+	}
+
+	n = len(out)
+
+	// need to pad if we were absorbing
+	if s.state == spongeAbsorbing {
+		s.state = spongeSqueezing
+
+		// write hash directly into out if possible
+		if len(out)%s.rate == 0 {
+			klmd(s.function, &s.a, out, s.buf) // len(out) may be 0
+			s.buf = s.buf[:0]
+			return
+		}
+
+		// write hash into buffer
+		max := cap(s.buf)
+		if max > len(out) {
+			max = (len(out)/s.rate)*s.rate + s.rate
+		}
+		klmd(s.function, &s.a, s.buf[:max], s.buf)
+		s.buf = s.buf[:max]
+	}
+
+	for len(out) > 0 {
+		// flush the buffer
+		if len(s.buf) != 0 {
+			c := copy(out, s.buf)
+			out = out[c:]
+			s.buf = s.buf[c:]
+			continue
+		}
+
+		// write hash directly into out if possible
+		if len(out)%s.rate == 0 {
+			klmd(s.function|nopad, &s.a, out, nil)
+			return
+		}
+
+		// write hash into buffer
+		s.resetBuf()
+		if cap(s.buf) > len(out) {
+			s.buf = s.buf[:(len(out)/s.rate)*s.rate+s.rate]
+		}
+		klmd(s.function|nopad, &s.a, s.buf, nil)
+	}
+	return
+}
+
+// Sum appends the current hash to b and returns the resulting slice.
+// It does not change the underlying hash state.
+func (s *asmState) Sum(b []byte) []byte {
+	if s.state != spongeAbsorbing {
+		panic("sha3: Sum after Read")
+	}
+
+	// Copy the state to preserve the original.
+	a := s.a
+
+	// Hash the buffer. Note that we don't clear it because we
+	// aren't updating the state.
+	switch s.function {
+	case sha3_224, sha3_256, sha3_384, sha3_512:
+		klmd(s.function, &a, nil, s.buf)
+		return append(b, a[:s.outputLen]...)
+	case shake_128, shake_256:
+		d := make([]byte, s.outputLen, 64)
+		klmd(s.function, &a, d, s.buf)
+		return append(b, d[:s.outputLen]...)
+	default:
+		panic("sha3: unknown function")
+	}
+}
+
+// Reset resets the Hash to its initial state.
+func (s *asmState) Reset() {
+	for i := range s.a {
+		s.a[i] = 0
+	}
+	s.resetBuf()
+	s.state = spongeAbsorbing
+}
+
+// Size returns the number of bytes Sum will return.
+func (s *asmState) Size() int {
+	return s.outputLen
+}
+
+// BlockSize returns the hash's underlying block size.
+// The Write method must be able to accept any amount
+// of data, but it may operate more efficiently if all writes
+// are a multiple of the block size.
+func (s *asmState) BlockSize() int {
+	return s.rate
+}
+
+// Clone returns a copy of the ShakeHash in its current state.
+func (s *asmState) Clone() ShakeHash {
+	return s.clone()
+}
+
+// new224 returns an assembly implementation of SHA3-224 if available,
+// otherwise it returns a generic implementation.
+func new224() hash.Hash {
+	if cpu.S390X.HasSHA3 {
+		return newAsmState(sha3_224)
+	}
+	return new224Generic()
+}
+
+// new256 returns an assembly implementation of SHA3-256 if available,
+// otherwise it returns a generic implementation.
+func new256() hash.Hash {
+	if cpu.S390X.HasSHA3 {
+		return newAsmState(sha3_256)
+	}
+	return new256Generic()
+}
+
+// new384 returns an assembly implementation of SHA3-384 if available,
+// otherwise it returns a generic implementation.
+func new384() hash.Hash {
+	if cpu.S390X.HasSHA3 {
+		return newAsmState(sha3_384)
+	}
+	return new384Generic()
+}
+
+// new512 returns an assembly implementation of SHA3-512 if available,
+// otherwise it returns a generic implementation.
+func new512() hash.Hash {
+	if cpu.S390X.HasSHA3 {
+		return newAsmState(sha3_512)
+	}
+	return new512Generic()
+}
+
+// newShake128 returns an assembly implementation of SHAKE-128 if available,
+// otherwise it returns a generic implementation.
+func newShake128() ShakeHash {
+	if cpu.S390X.HasSHA3 {
+		return newAsmState(shake_128)
+	}
+	return newShake128Generic()
+}
+
+// newShake256 returns an assembly implementation of SHAKE-256 if available,
+// otherwise it returns a generic implementation.
+func newShake256() ShakeHash {
+	if cpu.S390X.HasSHA3 {
+		return newAsmState(shake_256)
+	}
+	return newShake256Generic()
+}

vendor/golang.org/x/crypto/sha3/sha3_s390x.s

@@ -0,0 +1,33 @@
+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build gc && !purego
+
+#include "textflag.h"
+
+// func kimd(function code, chain *[200]byte, src []byte)
+TEXT ·kimd(SB), NOFRAME|NOSPLIT, $0-40
+	MOVD function+0(FP), R0
+	MOVD chain+8(FP), R1
+	LMG  src+16(FP), R2, R3 // R2=base, R3=len
+
+continue:
+	WORD $0xB93E0002 // KIMD --, R2
+	BVS  continue    // continue if interrupted
+	MOVD $0, R0      // reset R0 for pre-go1.8 compilers
+	RET
+
+// func klmd(function code, chain *[200]byte, dst, src []byte)
+TEXT ·klmd(SB), NOFRAME|NOSPLIT, $0-64
+	// TODO: SHAKE support
+	MOVD function+0(FP), R0
+	MOVD chain+8(FP), R1
+	LMG  dst+16(FP), R2, R3 // R2=base, R3=len
+	LMG  src+40(FP), R4, R5 // R4=base, R5=len
+
+continue:
+	WORD $0xB93F0024 // KLMD R2, R4
+	BVS  continue    // continue if interrupted
+	MOVD $0, R0      // reset R0 for pre-go1.8 compilers
+	RET

vendor/golang.org/x/crypto/sha3/shake.go

@@ -0,0 +1,193 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package sha3
+
+// This file defines the ShakeHash interface, and provides
+// functions for creating SHAKE and cSHAKE instances, as well as utility
+// functions for hashing bytes to arbitrary-length output.
+//
+//
+// SHAKE implementation is based on FIPS PUB 202 [1]
+// cSHAKE implementations is based on NIST SP 800-185 [2]
+//
+// [1] https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.202.pdf
+// [2] https://doi.org/10.6028/NIST.SP.800-185
+
+import (
+	"bytes"
+	"encoding/binary"
+	"errors"
+	"hash"
+	"io"
+	"math/bits"
+)
+
+// ShakeHash defines the interface to hash functions that support
+// arbitrary-length output. When used as a plain [hash.Hash], it
+// produces minimum-length outputs that provide full-strength generic
+// security.
+type ShakeHash interface {
+	hash.Hash
+
+	// Read reads more output from the hash; reading affects the hash's
+	// state. (ShakeHash.Read is thus very different from Hash.Sum)
+	// It never returns an error, but subsequent calls to Write or Sum
+	// will panic.
+	io.Reader
+
+	// Clone returns a copy of the ShakeHash in its current state.
+	Clone() ShakeHash
+}
+
+// cSHAKE specific context
+type cshakeState struct {
+	*state // SHA-3 state context and Read/Write operations
+
+	// initBlock is the cSHAKE specific initialization set of bytes. It is initialized
+	// by newCShake function and stores concatenation of N followed by S, encoded
+	// by the method specified in 3.3 of [1].
+	// It is stored here in order for Reset() to be able to put context into
+	// initial state.
+	initBlock []byte
+}
+
+func bytepad(data []byte, rate int) []byte {
+	out := make([]byte, 0, 9+len(data)+rate-1)
+	out = append(out, leftEncode(uint64(rate))...)
+	out = append(out, data...)
+	if padlen := rate - len(out)%rate; padlen < rate {
+		out = append(out, make([]byte, padlen)...)
+	}
+	return out
+}
+
+func leftEncode(x uint64) []byte {
+	// Let n be the smallest positive integer for which 2^(8n) > x.
+	n := (bits.Len64(x) + 7) / 8
+	if n == 0 {
+		n = 1
+	}
+	// Return n || x with n as a byte and x an n bytes in big-endian order.
+	b := make([]byte, 9)
+	binary.BigEndian.PutUint64(b[1:], x)
+	b = b[9-n-1:]
+	b[0] = byte(n)
+	return b
+}
+
+func newCShake(N, S []byte, rate, outputLen int, dsbyte byte) ShakeHash {
+	c := cshakeState{state: &state{rate: rate, outputLen: outputLen, dsbyte: dsbyte}}
+	c.initBlock = make([]byte, 0, 9+len(N)+9+len(S)) // leftEncode returns max 9 bytes
+	c.initBlock = append(c.initBlock, leftEncode(uint64(len(N))*8)...)
+	c.initBlock = append(c.initBlock, N...)
+	c.initBlock = append(c.initBlock, leftEncode(uint64(len(S))*8)...)
+	c.initBlock = append(c.initBlock, S...)
+	c.Write(bytepad(c.initBlock, c.rate))
+	return &c
+}
+
+// Reset resets the hash to initial state.
+func (c *cshakeState) Reset() {
+	c.state.Reset()
+	c.Write(bytepad(c.initBlock, c.rate))
+}
+
+// Clone returns copy of a cSHAKE context within its current state.
+func (c *cshakeState) Clone() ShakeHash {
+	b := make([]byte, len(c.initBlock))
+	copy(b, c.initBlock)
+	return &cshakeState{state: c.clone(), initBlock: b}
+}
+
+// Clone returns copy of SHAKE context within its current state.
+func (c *state) Clone() ShakeHash {
+	return c.clone()
+}
+
+func (c *cshakeState) MarshalBinary() ([]byte, error) {
+	return c.AppendBinary(make([]byte, 0, marshaledSize+len(c.initBlock)))
+}
+
+func (c *cshakeState) AppendBinary(b []byte) ([]byte, error) {
+	b, err := c.state.AppendBinary(b)
+	if err != nil {
+		return nil, err
+	}
+	b = append(b, c.initBlock...)
+	return b, nil
+}
+
+func (c *cshakeState) UnmarshalBinary(b []byte) error {
+	if len(b) <= marshaledSize {
+		return errors.New("sha3: invalid hash state")
+	}
+	if err := c.state.UnmarshalBinary(b[:marshaledSize]); err != nil {
+		return err
+	}
+	c.initBlock = bytes.Clone(b[marshaledSize:])
+	return nil
+}
+
+// NewShake128 creates a new SHAKE128 variable-output-length ShakeHash.
+// Its generic security strength is 128 bits against all attacks if at
+// least 32 bytes of its output are used.
+func NewShake128() ShakeHash {
+	return newShake128()
+}
+
+// NewShake256 creates a new SHAKE256 variable-output-length ShakeHash.
+// Its generic security strength is 256 bits against all attacks if
+// at least 64 bytes of its output are used.
+func NewShake256() ShakeHash {
+	return newShake256()
+}
+
+func newShake128Generic() *state {
+	return &state{rate: rateK256, outputLen: 32, dsbyte: dsbyteShake}
+}
+
+func newShake256Generic() *state {
+	return &state{rate: rateK512, outputLen: 64, dsbyte: dsbyteShake}
+}
+
+// NewCShake128 creates a new instance of cSHAKE128 variable-output-length ShakeHash,
+// a customizable variant of SHAKE128.
+// N is used to define functions based on cSHAKE, it can be empty when plain cSHAKE is
+// desired. S is a customization byte string used for domain separation - two cSHAKE
+// computations on same input with different S yield unrelated outputs.
+// When N and S are both empty, this is equivalent to NewShake128.
+func NewCShake128(N, S []byte) ShakeHash {
+	if len(N) == 0 && len(S) == 0 {
+		return NewShake128()
+	}
+	return newCShake(N, S, rateK256, 32, dsbyteCShake)
+}
+
+// NewCShake256 creates a new instance of cSHAKE256 variable-output-length ShakeHash,
+// a customizable variant of SHAKE256.
+// N is used to define functions based on cSHAKE, it can be empty when plain cSHAKE is
+// desired. S is a customization byte string used for domain separation - two cSHAKE
+// computations on same input with different S yield unrelated outputs.
+// When N and S are both empty, this is equivalent to NewShake256.
+func NewCShake256(N, S []byte) ShakeHash {
+	if len(N) == 0 && len(S) == 0 {
+		return NewShake256()
+	}
+	return newCShake(N, S, rateK512, 64, dsbyteCShake)
+}
+
+// ShakeSum128 writes an arbitrary-length digest of data into hash.
+func ShakeSum128(hash, data []byte) {
+	h := NewShake128()
+	h.Write(data)
+	h.Read(hash)
+}
+
+// ShakeSum256 writes an arbitrary-length digest of data into hash.
+func ShakeSum256(hash, data []byte) {
+	h := NewShake256()
+	h.Write(data)
+	h.Read(hash)
+}

vendor/golang.org/x/crypto/sha3/shake_noasm.go

@@ -0,0 +1,15 @@
+// Copyright 2023 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build !gc || purego || !s390x
+
+package sha3
+
+func newShake128() *state {
+	return newShake128Generic()
+}
+
+func newShake256() *state {
+	return newShake256Generic()
+}

vendor/golang.org/x/exp/LICENSE

@@ -0,0 +1,27 @@
+Copyright (c) 2009 The Go Authors. All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+   * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+   * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+   * Neither the name of Google Inc. nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

vendor/golang.org/x/exp/PATENTS

@@ -0,0 +1,22 @@
+Additional IP Rights Grant (Patents)
+
+"This implementation" means the copyrightable works distributed by
+Google as part of the Go project.
+
+Google hereby grants to You a perpetual, worldwide, non-exclusive,
+no-charge, royalty-free, irrevocable (except as stated in this section)
+patent license to make, have made, use, offer to sell, sell, import,
+transfer and otherwise run, modify and propagate the contents of this
+implementation of Go, where such license applies only to those patent
+claims, both currently owned or controlled by Google and acquired in
+the future, licensable by Google that are necessarily infringed by this
+implementation of Go.  This grant does not include claims that would be
+infringed only as a consequence of further modification of this
+implementation.  If you or your agent or exclusive licensee institute or
+order or agree to the institution of patent litigation against any
+entity (including a cross-claim or counterclaim in a lawsuit) alleging
+that this implementation of Go or any code incorporated within this
+implementation of Go constitutes direct or contributory patent
+infringement, or inducement of patent infringement, then any patent
+rights granted to you under this License for this implementation of Go
+shall terminate as of the date such litigation is filed.

vendor/golang.org/x/exp/constraints/constraints.go

@@ -0,0 +1,50 @@
+// Copyright 2021 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package constraints defines a set of useful constraints to be used
+// with type parameters.
+package constraints
+
+// Signed is a constraint that permits any signed integer type.
+// If future releases of Go add new predeclared signed integer types,
+// this constraint will be modified to include them.
+type Signed interface {
+	~int | ~int8 | ~int16 | ~int32 | ~int64
+}
+
+// Unsigned is a constraint that permits any unsigned integer type.
+// If future releases of Go add new predeclared unsigned integer types,
+// this constraint will be modified to include them.
+type Unsigned interface {
+	~uint | ~uint8 | ~uint16 | ~uint32 | ~uint64 | ~uintptr
+}
+
+// Integer is a constraint that permits any integer type.
+// If future releases of Go add new predeclared integer types,
+// this constraint will be modified to include them.
+type Integer interface {
+	Signed | Unsigned
+}
+
+// Float is a constraint that permits any floating-point type.
+// If future releases of Go add new predeclared floating-point types,
+// this constraint will be modified to include them.
+type Float interface {
+	~float32 | ~float64
+}
+
+// Complex is a constraint that permits any complex numeric type.
+// If future releases of Go add new predeclared complex numeric types,
+// this constraint will be modified to include them.
+type Complex interface {
+	~complex64 | ~complex128
+}
+
+// Ordered is a constraint that permits any ordered type: any type
+// that supports the operators < <= >= >.
+// If future releases of Go add new ordered types,
+// this constraint will be modified to include them.
+type Ordered interface {
+	Integer | Float | ~string
+}

vendor/golang.org/x/exp/slices/cmp.go

@@ -0,0 +1,44 @@
+// Copyright 2023 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package slices
+
+import "golang.org/x/exp/constraints"
+
+// min is a version of the predeclared function from the Go 1.21 release.
+func min[T constraints.Ordered](a, b T) T {
+	if a < b || isNaN(a) {
+		return a
+	}
+	return b
+}
+
+// max is a version of the predeclared function from the Go 1.21 release.
+func max[T constraints.Ordered](a, b T) T {
+	if a > b || isNaN(a) {
+		return a
+	}
+	return b
+}
+
+// cmpLess is a copy of cmp.Less from the Go 1.21 release.
+func cmpLess[T constraints.Ordered](x, y T) bool {
+	return (isNaN(x) && !isNaN(y)) || x < y
+}
+
+// cmpCompare is a copy of cmp.Compare from the Go 1.21 release.
+func cmpCompare[T constraints.Ordered](x, y T) int {
+	xNaN := isNaN(x)
+	yNaN := isNaN(y)
+	if xNaN && yNaN {
+		return 0
+	}
+	if xNaN || x < y {
+		return -1
+	}
+	if yNaN || x > y {
+		return +1
+	}
+	return 0
+}

vendor/golang.org/x/exp/slices/slices.go

@@ -0,0 +1,499 @@
+// Copyright 2021 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package slices defines various functions useful with slices of any type.
+package slices
+
+import (
+	"unsafe"
+
+	"golang.org/x/exp/constraints"
+)
+
+// Equal reports whether two slices are equal: the same length and all
+// elements equal. If the lengths are different, Equal returns false.
+// Otherwise, the elements are compared in increasing index order, and the
+// comparison stops at the first unequal pair.
+// Floating point NaNs are not considered equal.
+func Equal[S ~[]E, E comparable](s1, s2 S) bool {
+	if len(s1) != len(s2) {
+		return false
+	}
+	for i := range s1 {
+		if s1[i] != s2[i] {
+			return false
+		}
+	}
+	return true
+}
+
+// EqualFunc reports whether two slices are equal using an equality
+// function on each pair of elements. If the lengths are different,
+// EqualFunc returns false. Otherwise, the elements are compared in
+// increasing index order, and the comparison stops at the first index
+// for which eq returns false.
+func EqualFunc[S1 ~[]E1, S2 ~[]E2, E1, E2 any](s1 S1, s2 S2, eq func(E1, E2) bool) bool {
+	if len(s1) != len(s2) {
+		return false
+	}
+	for i, v1 := range s1 {
+		v2 := s2[i]
+		if !eq(v1, v2) {
+			return false
+		}
+	}
+	return true
+}
+
+// Compare compares the elements of s1 and s2, using [cmp.Compare] on each pair
+// of elements. The elements are compared sequentially, starting at index 0,
+// until one element is not equal to the other.
+// The result of comparing the first non-matching elements is returned.
+// If both slices are equal until one of them ends, the shorter slice is
+// considered less than the longer one.
+// The result is 0 if s1 == s2, -1 if s1 < s2, and +1 if s1 > s2.
+func Compare[S ~[]E, E constraints.Ordered](s1, s2 S) int {
+	for i, v1 := range s1 {
+		if i >= len(s2) {
+			return +1
+		}
+		v2 := s2[i]
+		if c := cmpCompare(v1, v2); c != 0 {
+			return c
+		}
+	}
+	if len(s1) < len(s2) {
+		return -1
+	}
+	return 0
+}
+
+// CompareFunc is like [Compare] but uses a custom comparison function on each
+// pair of elements.
+// The result is the first non-zero result of cmp; if cmp always
+// returns 0 the result is 0 if len(s1) == len(s2), -1 if len(s1) < len(s2),
+// and +1 if len(s1) > len(s2).
+func CompareFunc[S1 ~[]E1, S2 ~[]E2, E1, E2 any](s1 S1, s2 S2, cmp func(E1, E2) int) int {
+	for i, v1 := range s1 {
+		if i >= len(s2) {
+			return +1
+		}
+		v2 := s2[i]
+		if c := cmp(v1, v2); c != 0 {
+			return c
+		}
+	}
+	if len(s1) < len(s2) {
+		return -1
+	}
+	return 0
+}
+
+// Index returns the index of the first occurrence of v in s,
+// or -1 if not present.
+func Index[S ~[]E, E comparable](s S, v E) int {
+	for i := range s {
+		if v == s[i] {
+			return i
+		}
+	}
+	return -1
+}
+
+// IndexFunc returns the first index i satisfying f(s[i]),
+// or -1 if none do.
+func IndexFunc[S ~[]E, E any](s S, f func(E) bool) int {
+	for i := range s {
+		if f(s[i]) {
+			return i
+		}
+	}
+	return -1
+}
+
+// Contains reports whether v is present in s.
+func Contains[S ~[]E, E comparable](s S, v E) bool {
+	return Index(s, v) >= 0
+}
+
+// ContainsFunc reports whether at least one
+// element e of s satisfies f(e).
+func ContainsFunc[S ~[]E, E any](s S, f func(E) bool) bool {
+	return IndexFunc(s, f) >= 0
+}
+
+// Insert inserts the values v... into s at index i,
+// returning the modified slice.
+// The elements at s[i:] are shifted up to make room.
+// In the returned slice r, r[i] == v[0],
+// and r[i+len(v)] == value originally at r[i].
+// Insert panics if i is out of range.
+// This function is O(len(s) + len(v)).
+func Insert[S ~[]E, E any](s S, i int, v ...E) S {
+	m := len(v)
+	if m == 0 {
+		return s
+	}
+	n := len(s)
+	if i == n {
+		return append(s, v...)
+	}
+	if n+m > cap(s) {
+		// Use append rather than make so that we bump the size of
+		// the slice up to the next storage class.
+		// This is what Grow does but we don't call Grow because
+		// that might copy the values twice.
+		s2 := append(s[:i], make(S, n+m-i)...)
+		copy(s2[i:], v)
+		copy(s2[i+m:], s[i:])
+		return s2
+	}
+	s = s[:n+m]
+
+	// before:
+	// s: aaaaaaaabbbbccccccccdddd
+	//            ^   ^       ^   ^
+	//            i  i+m      n  n+m
+	// after:
+	// s: aaaaaaaavvvvbbbbcccccccc
+	//            ^   ^       ^   ^
+	//            i  i+m      n  n+m
+	//
+	// a are the values that don't move in s.
+	// v are the values copied in from v.
+	// b and c are the values from s that are shifted up in index.
+	// d are the values that get overwritten, never to be seen again.
+
+	if !overlaps(v, s[i+m:]) {
+		// Easy case - v does not overlap either the c or d regions.
+		// (It might be in some of a or b, or elsewhere entirely.)
+		// The data we copy up doesn't write to v at all, so just do it.
+
+		copy(s[i+m:], s[i:])
+
+		// Now we have
+		// s: aaaaaaaabbbbbbbbcccccccc
+		//            ^   ^       ^   ^
+		//            i  i+m      n  n+m
+		// Note the b values are duplicated.
+
+		copy(s[i:], v)
+
+		// Now we have
+		// s: aaaaaaaavvvvbbbbcccccccc
+		//            ^   ^       ^   ^
+		//            i  i+m      n  n+m
+		// That's the result we want.
+		return s
+	}
+
+	// The hard case - v overlaps c or d. We can't just shift up
+	// the data because we'd move or clobber the values we're trying
+	// to insert.
+	// So instead, write v on top of d, then rotate.
+	copy(s[n:], v)
+
+	// Now we have
+	// s: aaaaaaaabbbbccccccccvvvv
+	//            ^   ^       ^   ^
+	//            i  i+m      n  n+m
+
+	rotateRight(s[i:], m)
+
+	// Now we have
+	// s: aaaaaaaavvvvbbbbcccccccc
+	//            ^   ^       ^   ^
+	//            i  i+m      n  n+m
+	// That's the result we want.
+	return s
+}
+
+// Delete removes the elements s[i:j] from s, returning the modified slice.
+// Delete panics if s[i:j] is not a valid slice of s.
+// Delete is O(len(s)-j), so if many items must be deleted, it is better to
+// make a single call deleting them all together than to delete one at a time.
+// Delete might not modify the elements s[len(s)-(j-i):len(s)]. If those
+// elements contain pointers you might consider zeroing those elements so that
+// objects they reference can be garbage collected.
+func Delete[S ~[]E, E any](s S, i, j int) S {
+	_ = s[i:j] // bounds check
+
+	return append(s[:i], s[j:]...)
+}
+
+// DeleteFunc removes any elements from s for which del returns true,
+// returning the modified slice.
+// When DeleteFunc removes m elements, it might not modify the elements
+// s[len(s)-m:len(s)]. If those elements contain pointers you might consider
+// zeroing those elements so that objects they reference can be garbage
+// collected.
+func DeleteFunc[S ~[]E, E any](s S, del func(E) bool) S {
+	i := IndexFunc(s, del)
+	if i == -1 {
+		return s
+	}
+	// Don't start copying elements until we find one to delete.
+	for j := i + 1; j < len(s); j++ {
+		if v := s[j]; !del(v) {
+			s[i] = v
+			i++
+		}
+	}
+	return s[:i]
+}
+
+// Replace replaces the elements s[i:j] by the given v, and returns the
+// modified slice. Replace panics if s[i:j] is not a valid slice of s.
+func Replace[S ~[]E, E any](s S, i, j int, v ...E) S {
+	_ = s[i:j] // verify that i:j is a valid subslice
+
+	if i == j {
+		return Insert(s, i, v...)
+	}
+	if j == len(s) {
+		return append(s[:i], v...)
+	}
+
+	tot := len(s[:i]) + len(v) + len(s[j:])
+	if tot > cap(s) {
+		// Too big to fit, allocate and copy over.
+		s2 := append(s[:i], make(S, tot-i)...) // See Insert
+		copy(s2[i:], v)
+		copy(s2[i+len(v):], s[j:])
+		return s2
+	}
+
+	r := s[:tot]
+
+	if i+len(v) <= j {
+		// Easy, as v fits in the deleted portion.
+		copy(r[i:], v)
+		if i+len(v) != j {
+			copy(r[i+len(v):], s[j:])
+		}
+		return r
+	}
+
+	// We are expanding (v is bigger than j-i).
+	// The situation is something like this:
+	// (example has i=4,j=8,len(s)=16,len(v)=6)
+	// s: aaaaxxxxbbbbbbbbyy
+	//        ^   ^       ^ ^
+	//        i   j  len(s) tot
+	// a: prefix of s
+	// x: deleted range
+	// b: more of s
+	// y: area to expand into
+
+	if !overlaps(r[i+len(v):], v) {
+		// Easy, as v is not clobbered by the first copy.
+		copy(r[i+len(v):], s[j:])
+		copy(r[i:], v)
+		return r
+	}
+
+	// This is a situation where we don't have a single place to which
+	// we can copy v. Parts of it need to go to two different places.
+	// We want to copy the prefix of v into y and the suffix into x, then
+	// rotate |y| spots to the right.
+	//
+	//        v[2:]      v[:2]
+	//         |           |
+	// s: aaaavvvvbbbbbbbbvv
+	//        ^   ^       ^ ^
+	//        i   j  len(s) tot
+	//
+	// If either of those two destinations don't alias v, then we're good.
+	y := len(v) - (j - i) // length of y portion
+
+	if !overlaps(r[i:j], v) {
+		copy(r[i:j], v[y:])
+		copy(r[len(s):], v[:y])
+		rotateRight(r[i:], y)
+		return r
+	}
+	if !overlaps(r[len(s):], v) {
+		copy(r[len(s):], v[:y])
+		copy(r[i:j], v[y:])
+		rotateRight(r[i:], y)
+		return r
+	}
+
+	// Now we know that v overlaps both x and y.
+	// That means that the entirety of b is *inside* v.
+	// So we don't need to preserve b at all; instead we
+	// can copy v first, then copy the b part of v out of
+	// v to the right destination.
+	k := startIdx(v, s[j:])
+	copy(r[i:], v)
+	copy(r[i+len(v):], r[i+k:])
+	return r
+}
+
+// Clone returns a copy of the slice.
+// The elements are copied using assignment, so this is a shallow clone.
+func Clone[S ~[]E, E any](s S) S {
+	// Preserve nil in case it matters.
+	if s == nil {
+		return nil
+	}
+	return append(S([]E{}), s...)
+}
+
+// Compact replaces consecutive runs of equal elements with a single copy.
+// This is like the uniq command found on Unix.
+// Compact modifies the contents of the slice s and returns the modified slice,
+// which may have a smaller length.
+// When Compact discards m elements in total, it might not modify the elements
+// s[len(s)-m:len(s)]. If those elements contain pointers you might consider
+// zeroing those elements so that objects they reference can be garbage collected.
+func Compact[S ~[]E, E comparable](s S) S {
+	if len(s) < 2 {
+		return s
+	}
+	i := 1
+	for k := 1; k < len(s); k++ {
+		if s[k] != s[k-1] {
+			if i != k {
+				s[i] = s[k]
+			}
+			i++
+		}
+	}
+	return s[:i]
+}
+
+// CompactFunc is like [Compact] but uses an equality function to compare elements.
+// For runs of elements that compare equal, CompactFunc keeps the first one.
+func CompactFunc[S ~[]E, E any](s S, eq func(E, E) bool) S {
+	if len(s) < 2 {
+		return s
+	}
+	i := 1
+	for k := 1; k < len(s); k++ {
+		if !eq(s[k], s[k-1]) {
+			if i != k {
+				s[i] = s[k]
+			}
+			i++
+		}
+	}
+	return s[:i]
+}
+
+// Grow increases the slice's capacity, if necessary, to guarantee space for
+// another n elements. After Grow(n), at least n elements can be appended
+// to the slice without another allocation. If n is negative or too large to
+// allocate the memory, Grow panics.
+func Grow[S ~[]E, E any](s S, n int) S {
+	if n < 0 {
+		panic("cannot be negative")
+	}
+	if n -= cap(s) - len(s); n > 0 {
+		// TODO(https://go.dev/issue/53888): Make using []E instead of S
+		// to workaround a compiler bug where the runtime.growslice optimization
+		// does not take effect. Revert when the compiler is fixed.
+		s = append([]E(s)[:cap(s)], make([]E, n)...)[:len(s)]
+	}
+	return s
+}
+
+// Clip removes unused capacity from the slice, returning s[:len(s):len(s)].
+func Clip[S ~[]E, E any](s S) S {
+	return s[:len(s):len(s)]
+}
+
+// Rotation algorithm explanation:
+//
+// rotate left by 2
+// start with
+//   0123456789
+// split up like this
+//   01 234567 89
+// swap first 2 and last 2
+//   89 234567 01
+// join first parts
+//   89234567 01
+// recursively rotate first left part by 2
+//   23456789 01
+// join at the end
+//   2345678901
+//
+// rotate left by 8
+// start with
+//   0123456789
+// split up like this
+//   01 234567 89
+// swap first 2 and last 2
+//   89 234567 01
+// join last parts
+//   89 23456701
+// recursively rotate second part left by 6
+//   89 01234567
+// join at the end
+//   8901234567
+
+// TODO: There are other rotate algorithms.
+// This algorithm has the desirable property that it moves each element exactly twice.
+// The triple-reverse algorithm is simpler and more cache friendly, but takes more writes.
+// The follow-cycles algorithm can be 1-write but it is not very cache friendly.
+
+// rotateLeft rotates b left by n spaces.
+// s_final[i] = s_orig[i+r], wrapping around.
+func rotateLeft[E any](s []E, r int) {
+	for r != 0 && r != len(s) {
+		if r*2 <= len(s) {
+			swap(s[:r], s[len(s)-r:])
+			s = s[:len(s)-r]
+		} else {
+			swap(s[:len(s)-r], s[r:])
+			s, r = s[len(s)-r:], r*2-len(s)
+		}
+	}
+}
+func rotateRight[E any](s []E, r int) {
+	rotateLeft(s, len(s)-r)
+}
+
+// swap swaps the contents of x and y. x and y must be equal length and disjoint.
+func swap[E any](x, y []E) {
+	for i := 0; i < len(x); i++ {
+		x[i], y[i] = y[i], x[i]
+	}
+}
+
+// overlaps reports whether the memory ranges a[0:len(a)] and b[0:len(b)] overlap.
+func overlaps[E any](a, b []E) bool {
+	if len(a) == 0 || len(b) == 0 {
+		return false
+	}
+	elemSize := unsafe.Sizeof(a[0])
+	if elemSize == 0 {
+		return false
+	}
+	// TODO: use a runtime/unsafe facility once one becomes available. See issue 12445.
+	// Also see crypto/internal/alias/alias.go:AnyOverlap
+	return uintptr(unsafe.Pointer(&a[0])) <= uintptr(unsafe.Pointer(&b[len(b)-1]))+(elemSize-1) &&
+		uintptr(unsafe.Pointer(&b[0])) <= uintptr(unsafe.Pointer(&a[len(a)-1]))+(elemSize-1)
+}
+
+// startIdx returns the index in haystack where the needle starts.
+// prerequisite: the needle must be aliased entirely inside the haystack.
+func startIdx[E any](haystack, needle []E) int {
+	p := &needle[0]
+	for i := range haystack {
+		if p == &haystack[i] {
+			return i
+		}
+	}
+	// TODO: what if the overlap is by a non-integral number of Es?
+	panic("needle not found")
+}
+
+// Reverse reverses the elements of the slice in place.
+func Reverse[S ~[]E, E any](s S) {
+	for i, j := 0, len(s)-1; i < j; i, j = i+1, j-1 {
+		s[i], s[j] = s[j], s[i]
+	}
+}

vendor/golang.org/x/exp/slices/sort.go

@@ -0,0 +1,195 @@
+// Copyright 2022 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:generate go run $GOROOT/src/sort/gen_sort_variants.go -exp
+
+package slices
+
+import (
+	"math/bits"
+
+	"golang.org/x/exp/constraints"
+)
+
+// Sort sorts a slice of any ordered type in ascending order.
+// When sorting floating-point numbers, NaNs are ordered before other values.
+func Sort[S ~[]E, E constraints.Ordered](x S) {
+	n := len(x)
+	pdqsortOrdered(x, 0, n, bits.Len(uint(n)))
+}
+
+// SortFunc sorts the slice x in ascending order as determined by the cmp
+// function. This sort is not guaranteed to be stable.
+// cmp(a, b) should return a negative number when a < b, a positive number when
+// a > b and zero when a == b.
+//
+// SortFunc requires that cmp is a strict weak ordering.
+// See https://en.wikipedia.org/wiki/Weak_ordering#Strict_weak_orderings.
+func SortFunc[S ~[]E, E any](x S, cmp func(a, b E) int) {
+	n := len(x)
+	pdqsortCmpFunc(x, 0, n, bits.Len(uint(n)), cmp)
+}
+
+// SortStableFunc sorts the slice x while keeping the original order of equal
+// elements, using cmp to compare elements in the same way as [SortFunc].
+func SortStableFunc[S ~[]E, E any](x S, cmp func(a, b E) int) {
+	stableCmpFunc(x, len(x), cmp)
+}
+
+// IsSorted reports whether x is sorted in ascending order.
+func IsSorted[S ~[]E, E constraints.Ordered](x S) bool {
+	for i := len(x) - 1; i > 0; i-- {
+		if cmpLess(x[i], x[i-1]) {
+			return false
+		}
+	}
+	return true
+}
+
+// IsSortedFunc reports whether x is sorted in ascending order, with cmp as the
+// comparison function as defined by [SortFunc].
+func IsSortedFunc[S ~[]E, E any](x S, cmp func(a, b E) int) bool {
+	for i := len(x) - 1; i > 0; i-- {
+		if cmp(x[i], x[i-1]) < 0 {
+			return false
+		}
+	}
+	return true
+}
+
+// Min returns the minimal value in x. It panics if x is empty.
+// For floating-point numbers, Min propagates NaNs (any NaN value in x
+// forces the output to be NaN).
+func Min[S ~[]E, E constraints.Ordered](x S) E {
+	if len(x) < 1 {
+		panic("slices.Min: empty list")
+	}
+	m := x[0]
+	for i := 1; i < len(x); i++ {
+		m = min(m, x[i])
+	}
+	return m
+}
+
+// MinFunc returns the minimal value in x, using cmp to compare elements.
+// It panics if x is empty. If there is more than one minimal element
+// according to the cmp function, MinFunc returns the first one.
+func MinFunc[S ~[]E, E any](x S, cmp func(a, b E) int) E {
+	if len(x) < 1 {
+		panic("slices.MinFunc: empty list")
+	}
+	m := x[0]
+	for i := 1; i < len(x); i++ {
+		if cmp(x[i], m) < 0 {
+			m = x[i]
+		}
+	}
+	return m
+}
+
+// Max returns the maximal value in x. It panics if x is empty.
+// For floating-point E, Max propagates NaNs (any NaN value in x
+// forces the output to be NaN).
+func Max[S ~[]E, E constraints.Ordered](x S) E {
+	if len(x) < 1 {
+		panic("slices.Max: empty list")
+	}
+	m := x[0]
+	for i := 1; i < len(x); i++ {
+		m = max(m, x[i])
+	}
+	return m
+}
+
+// MaxFunc returns the maximal value in x, using cmp to compare elements.
+// It panics if x is empty. If there is more than one maximal element
+// according to the cmp function, MaxFunc returns the first one.
+func MaxFunc[S ~[]E, E any](x S, cmp func(a, b E) int) E {
+	if len(x) < 1 {
+		panic("slices.MaxFunc: empty list")
+	}
+	m := x[0]
+	for i := 1; i < len(x); i++ {
+		if cmp(x[i], m) > 0 {
+			m = x[i]
+		}
+	}
+	return m
+}
+
+// BinarySearch searches for target in a sorted slice and returns the position
+// where target is found, or the position where target would appear in the
+// sort order; it also returns a bool saying whether the target is really found
+// in the slice. The slice must be sorted in increasing order.
+func BinarySearch[S ~[]E, E constraints.Ordered](x S, target E) (int, bool) {
+	// Inlining is faster than calling BinarySearchFunc with a lambda.
+	n := len(x)
+	// Define x[-1] < target and x[n] >= target.
+	// Invariant: x[i-1] < target, x[j] >= target.
+	i, j := 0, n
+	for i < j {
+		h := int(uint(i+j) >> 1) // avoid overflow when computing h
+		// i ≤ h < j
+		if cmpLess(x[h], target) {
+			i = h + 1 // preserves x[i-1] < target
+		} else {
+			j = h // preserves x[j] >= target
+		}
+	}
+	// i == j, x[i-1] < target, and x[j] (= x[i]) >= target  =>  answer is i.
+	return i, i < n && (x[i] == target || (isNaN(x[i]) && isNaN(target)))
+}
+
+// BinarySearchFunc works like [BinarySearch], but uses a custom comparison
+// function. The slice must be sorted in increasing order, where "increasing"
+// is defined by cmp. cmp should return 0 if the slice element matches
+// the target, a negative number if the slice element precedes the target,
+// or a positive number if the slice element follows the target.
+// cmp must implement the same ordering as the slice, such that if
+// cmp(a, t) < 0 and cmp(b, t) >= 0, then a must precede b in the slice.
+func BinarySearchFunc[S ~[]E, E, T any](x S, target T, cmp func(E, T) int) (int, bool) {
+	n := len(x)
+	// Define cmp(x[-1], target) < 0 and cmp(x[n], target) >= 0 .
+	// Invariant: cmp(x[i - 1], target) < 0, cmp(x[j], target) >= 0.
+	i, j := 0, n
+	for i < j {
+		h := int(uint(i+j) >> 1) // avoid overflow when computing h
+		// i ≤ h < j
+		if cmp(x[h], target) < 0 {
+			i = h + 1 // preserves cmp(x[i - 1], target) < 0
+		} else {
+			j = h // preserves cmp(x[j], target) >= 0
+		}
+	}
+	// i == j, cmp(x[i-1], target) < 0, and cmp(x[j], target) (= cmp(x[i], target)) >= 0  =>  answer is i.
+	return i, i < n && cmp(x[i], target) == 0
+}
+
+type sortedHint int // hint for pdqsort when choosing the pivot
+
+const (
+	unknownHint sortedHint = iota
+	increasingHint
+	decreasingHint
+)
+
+// xorshift paper: https://www.jstatsoft.org/article/view/v008i14/xorshift.pdf
+type xorshift uint64
+
+func (r *xorshift) Next() uint64 {
+	*r ^= *r << 13
+	*r ^= *r >> 17
+	*r ^= *r << 5
+	return uint64(*r)
+}
+
+func nextPowerOfTwo(length int) uint {
+	return 1 << bits.Len(uint(length))
+}
+
+// isNaN reports whether x is a NaN without requiring the math package.
+// This will always return false if T is not floating-point.
+func isNaN[T constraints.Ordered](x T) bool {
+	return x != x
+}

vendor/golang.org/x/exp/slices/zsortanyfunc.go

@@ -0,0 +1,479 @@
+// Code generated by gen_sort_variants.go; DO NOT EDIT.
+
+// Copyright 2022 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package slices
+
+// insertionSortCmpFunc sorts data[a:b] using insertion sort.
+func insertionSortCmpFunc[E any](data []E, a, b int, cmp func(a, b E) int) {
+	for i := a + 1; i < b; i++ {
+		for j := i; j > a && (cmp(data[j], data[j-1]) < 0); j-- {
+			data[j], data[j-1] = data[j-1], data[j]
+		}
+	}
+}
+
+// siftDownCmpFunc implements the heap property on data[lo:hi].
+// first is an offset into the array where the root of the heap lies.
+func siftDownCmpFunc[E any](data []E, lo, hi, first int, cmp func(a, b E) int) {
+	root := lo
+	for {
+		child := 2*root + 1
+		if child >= hi {
+			break
+		}
+		if child+1 < hi && (cmp(data[first+child], data[first+child+1]) < 0) {
+			child++
+		}
+		if !(cmp(data[first+root], data[first+child]) < 0) {
+			return
+		}
+		data[first+root], data[first+child] = data[first+child], data[first+root]
+		root = child
+	}
+}
+
+func heapSortCmpFunc[E any](data []E, a, b int, cmp func(a, b E) int) {
+	first := a
+	lo := 0
+	hi := b - a
+
+	// Build heap with greatest element at top.
+	for i := (hi - 1) / 2; i >= 0; i-- {
+		siftDownCmpFunc(data, i, hi, first, cmp)
+	}
+
+	// Pop elements, largest first, into end of data.
+	for i := hi - 1; i >= 0; i-- {
+		data[first], data[first+i] = data[first+i], data[first]
+		siftDownCmpFunc(data, lo, i, first, cmp)
+	}
+}
+
+// pdqsortCmpFunc sorts data[a:b].
+// The algorithm based on pattern-defeating quicksort(pdqsort), but without the optimizations from BlockQuicksort.
+// pdqsort paper: https://arxiv.org/pdf/2106.05123.pdf
+// C++ implementation: https://github.com/orlp/pdqsort
+// Rust implementation: https://docs.rs/pdqsort/latest/pdqsort/
+// limit is the number of allowed bad (very unbalanced) pivots before falling back to heapsort.
+func pdqsortCmpFunc[E any](data []E, a, b, limit int, cmp func(a, b E) int) {
+	const maxInsertion = 12
+
+	var (
+		wasBalanced    = true // whether the last partitioning was reasonably balanced
+		wasPartitioned = true // whether the slice was already partitioned
+	)
+
+	for {
+		length := b - a
+
+		if length <= maxInsertion {
+			insertionSortCmpFunc(data, a, b, cmp)
+			return
+		}
+
+		// Fall back to heapsort if too many bad choices were made.
+		if limit == 0 {
+			heapSortCmpFunc(data, a, b, cmp)
+			return
+		}
+
+		// If the last partitioning was imbalanced, we need to breaking patterns.
+		if !wasBalanced {
+			breakPatternsCmpFunc(data, a, b, cmp)
+			limit--
+		}
+
+		pivot, hint := choosePivotCmpFunc(data, a, b, cmp)
+		if hint == decreasingHint {
+			reverseRangeCmpFunc(data, a, b, cmp)
+			// The chosen pivot was pivot-a elements after the start of the array.
+			// After reversing it is pivot-a elements before the end of the array.
+			// The idea came from Rust's implementation.
+			pivot = (b - 1) - (pivot - a)
+			hint = increasingHint
+		}
+
+		// The slice is likely already sorted.
+		if wasBalanced && wasPartitioned && hint == increasingHint {
+			if partialInsertionSortCmpFunc(data, a, b, cmp) {
+				return
+			}
+		}
+
+		// Probably the slice contains many duplicate elements, partition the slice into
+		// elements equal to and elements greater than the pivot.
+		if a > 0 && !(cmp(data[a-1], data[pivot]) < 0) {
+			mid := partitionEqualCmpFunc(data, a, b, pivot, cmp)
+			a = mid
+			continue
+		}
+
+		mid, alreadyPartitioned := partitionCmpFunc(data, a, b, pivot, cmp)
+		wasPartitioned = alreadyPartitioned
+
+		leftLen, rightLen := mid-a, b-mid
+		balanceThreshold := length / 8
+		if leftLen < rightLen {
+			wasBalanced = leftLen >= balanceThreshold
+			pdqsortCmpFunc(data, a, mid, limit, cmp)
+			a = mid + 1
+		} else {
+			wasBalanced = rightLen >= balanceThreshold
+			pdqsortCmpFunc(data, mid+1, b, limit, cmp)
+			b = mid
+		}
+	}
+}
+
+// partitionCmpFunc does one quicksort partition.
+// Let p = data[pivot]
+// Moves elements in data[a:b] around, so that data[i]<p and data[j]>=p for i<newpivot and j>newpivot.
+// On return, data[newpivot] = p
+func partitionCmpFunc[E any](data []E, a, b, pivot int, cmp func(a, b E) int) (newpivot int, alreadyPartitioned bool) {
+	data[a], data[pivot] = data[pivot], data[a]
+	i, j := a+1, b-1 // i and j are inclusive of the elements remaining to be partitioned
+
+	for i <= j && (cmp(data[i], data[a]) < 0) {
+		i++
+	}
+	for i <= j && !(cmp(data[j], data[a]) < 0) {
+		j--
+	}
+	if i > j {
+		data[j], data[a] = data[a], data[j]
+		return j, true
+	}
+	data[i], data[j] = data[j], data[i]
+	i++
+	j--
+
+	for {
+		for i <= j && (cmp(data[i], data[a]) < 0) {
+			i++
+		}
+		for i <= j && !(cmp(data[j], data[a]) < 0) {
+			j--
+		}
+		if i > j {
+			break
+		}
+		data[i], data[j] = data[j], data[i]
+		i++
+		j--
+	}
+	data[j], data[a] = data[a], data[j]
+	return j, false
+}
+
+// partitionEqualCmpFunc partitions data[a:b] into elements equal to data[pivot] followed by elements greater than data[pivot].
+// It assumed that data[a:b] does not contain elements smaller than the data[pivot].
+func partitionEqualCmpFunc[E any](data []E, a, b, pivot int, cmp func(a, b E) int) (newpivot int) {
+	data[a], data[pivot] = data[pivot], data[a]
+	i, j := a+1, b-1 // i and j are inclusive of the elements remaining to be partitioned
+
+	for {
+		for i <= j && !(cmp(data[a], data[i]) < 0) {
+			i++
+		}
+		for i <= j && (cmp(data[a], data[j]) < 0) {
+			j--
+		}
+		if i > j {
+			break
+		}
+		data[i], data[j] = data[j], data[i]
+		i++
+		j--
+	}
+	return i
+}
+
+// partialInsertionSortCmpFunc partially sorts a slice, returns true if the slice is sorted at the end.
+func partialInsertionSortCmpFunc[E any](data []E, a, b int, cmp func(a, b E) int) bool {
+	const (
+		maxSteps         = 5  // maximum number of adjacent out-of-order pairs that will get shifted
+		shortestShifting = 50 // don't shift any elements on short arrays
+	)
+	i := a + 1
+	for j := 0; j < maxSteps; j++ {
+		for i < b && !(cmp(data[i], data[i-1]) < 0) {
+			i++
+		}
+
+		if i == b {
+			return true
+		}
+
+		if b-a < shortestShifting {
+			return false
+		}
+
+		data[i], data[i-1] = data[i-1], data[i]
+
+		// Shift the smaller one to the left.
+		if i-a >= 2 {
+			for j := i - 1; j >= 1; j-- {
+				if !(cmp(data[j], data[j-1]) < 0) {
+					break
+				}
+				data[j], data[j-1] = data[j-1], data[j]
+			}
+		}
+		// Shift the greater one to the right.
+		if b-i >= 2 {
+			for j := i + 1; j < b; j++ {
+				if !(cmp(data[j], data[j-1]) < 0) {
+					break
+				}
+				data[j], data[j-1] = data[j-1], data[j]
+			}
+		}
+	}
+	return false
+}
+
+// breakPatternsCmpFunc scatters some elements around in an attempt to break some patterns
+// that might cause imbalanced partitions in quicksort.
+func breakPatternsCmpFunc[E any](data []E, a, b int, cmp func(a, b E) int) {
+	length := b - a
+	if length >= 8 {
+		random := xorshift(length)
+		modulus := nextPowerOfTwo(length)
+
+		for idx := a + (length/4)*2 - 1; idx <= a+(length/4)*2+1; idx++ {
+			other := int(uint(random.Next()) & (modulus - 1))
+			if other >= length {
+				other -= length
+			}
+			data[idx], data[a+other] = data[a+other], data[idx]
+		}
+	}
+}
+
+// choosePivotCmpFunc chooses a pivot in data[a:b].
+//
+// [0,8): chooses a static pivot.
+// [8,shortestNinther): uses the simple median-of-three method.
+// [shortestNinther,∞): uses the Tukey ninther method.
+func choosePivotCmpFunc[E any](data []E, a, b int, cmp func(a, b E) int) (pivot int, hint sortedHint) {
+	const (
+		shortestNinther = 50
+		maxSwaps        = 4 * 3
+	)
+
+	l := b - a
+
+	var (
+		swaps int
+		i     = a + l/4*1
+		j     = a + l/4*2
+		k     = a + l/4*3
+	)
+
+	if l >= 8 {
+		if l >= shortestNinther {
+			// Tukey ninther method, the idea came from Rust's implementation.
+			i = medianAdjacentCmpFunc(data, i, &swaps, cmp)
+			j = medianAdjacentCmpFunc(data, j, &swaps, cmp)
+			k = medianAdjacentCmpFunc(data, k, &swaps, cmp)
+		}
+		// Find the median among i, j, k and stores it into j.
+		j = medianCmpFunc(data, i, j, k, &swaps, cmp)
+	}
+
+	switch swaps {
+	case 0:
+		return j, increasingHint
+	case maxSwaps:
+		return j, decreasingHint
+	default:
+		return j, unknownHint
+	}
+}
+
+// order2CmpFunc returns x,y where data[x] <= data[y], where x,y=a,b or x,y=b,a.
+func order2CmpFunc[E any](data []E, a, b int, swaps *int, cmp func(a, b E) int) (int, int) {
+	if cmp(data[b], data[a]) < 0 {
+		*swaps++
+		return b, a
+	}
+	return a, b
+}
+
+// medianCmpFunc returns x where data[x] is the median of data[a],data[b],data[c], where x is a, b, or c.
+func medianCmpFunc[E any](data []E, a, b, c int, swaps *int, cmp func(a, b E) int) int {
+	a, b = order2CmpFunc(data, a, b, swaps, cmp)
+	b, c = order2CmpFunc(data, b, c, swaps, cmp)
+	a, b = order2CmpFunc(data, a, b, swaps, cmp)
+	return b
+}
+
+// medianAdjacentCmpFunc finds the median of data[a - 1], data[a], data[a + 1] and stores the index into a.
+func medianAdjacentCmpFunc[E any](data []E, a int, swaps *int, cmp func(a, b E) int) int {
+	return medianCmpFunc(data, a-1, a, a+1, swaps, cmp)
+}
+
+func reverseRangeCmpFunc[E any](data []E, a, b int, cmp func(a, b E) int) {
+	i := a
+	j := b - 1
+	for i < j {
+		data[i], data[j] = data[j], data[i]
+		i++
+		j--
+	}
+}
+
+func swapRangeCmpFunc[E any](data []E, a, b, n int, cmp func(a, b E) int) {
+	for i := 0; i < n; i++ {
+		data[a+i], data[b+i] = data[b+i], data[a+i]
+	}
+}
+
+func stableCmpFunc[E any](data []E, n int, cmp func(a, b E) int) {
+	blockSize := 20 // must be > 0
+	a, b := 0, blockSize
+	for b <= n {
+		insertionSortCmpFunc(data, a, b, cmp)
+		a = b
+		b += blockSize
+	}
+	insertionSortCmpFunc(data, a, n, cmp)
+
+	for blockSize < n {
+		a, b = 0, 2*blockSize
+		for b <= n {
+			symMergeCmpFunc(data, a, a+blockSize, b, cmp)
+			a = b
+			b += 2 * blockSize
+		}
+		if m := a + blockSize; m < n {
+			symMergeCmpFunc(data, a, m, n, cmp)
+		}
+		blockSize *= 2
+	}
+}
+
+// symMergeCmpFunc merges the two sorted subsequences data[a:m] and data[m:b] using
+// the SymMerge algorithm from Pok-Son Kim and Arne Kutzner, "Stable Minimum
+// Storage Merging by Symmetric Comparisons", in Susanne Albers and Tomasz
+// Radzik, editors, Algorithms - ESA 2004, volume 3221 of Lecture Notes in
+// Computer Science, pages 714-723. Springer, 2004.
+//
+// Let M = m-a and N = b-n. Wolog M < N.
+// The recursion depth is bound by ceil(log(N+M)).
+// The algorithm needs O(M*log(N/M + 1)) calls to data.Less.
+// The algorithm needs O((M+N)*log(M)) calls to data.Swap.
+//
+// The paper gives O((M+N)*log(M)) as the number of assignments assuming a
+// rotation algorithm which uses O(M+N+gcd(M+N)) assignments. The argumentation
+// in the paper carries through for Swap operations, especially as the block
+// swapping rotate uses only O(M+N) Swaps.
+//
+// symMerge assumes non-degenerate arguments: a < m && m < b.
+// Having the caller check this condition eliminates many leaf recursion calls,
+// which improves performance.
+func symMergeCmpFunc[E any](data []E, a, m, b int, cmp func(a, b E) int) {
+	// Avoid unnecessary recursions of symMerge
+	// by direct insertion of data[a] into data[m:b]
+	// if data[a:m] only contains one element.
+	if m-a == 1 {
+		// Use binary search to find the lowest index i
+		// such that data[i] >= data[a] for m <= i < b.
+		// Exit the search loop with i == b in case no such index exists.
+		i := m
+		j := b
+		for i < j {
+			h := int(uint(i+j) >> 1)
+			if cmp(data[h], data[a]) < 0 {
+				i = h + 1
+			} else {
+				j = h
+			}
+		}
+		// Swap values until data[a] reaches the position before i.
+		for k := a; k < i-1; k++ {
+			data[k], data[k+1] = data[k+1], data[k]
+		}
+		return
+	}
+
+	// Avoid unnecessary recursions of symMerge
+	// by direct insertion of data[m] into data[a:m]
+	// if data[m:b] only contains one element.
+	if b-m == 1 {
+		// Use binary search to find the lowest index i
+		// such that data[i] > data[m] for a <= i < m.
+		// Exit the search loop with i == m in case no such index exists.
+		i := a
+		j := m
+		for i < j {
+			h := int(uint(i+j) >> 1)
+			if !(cmp(data[m], data[h]) < 0) {
+				i = h + 1
+			} else {
+				j = h
+			}
+		}
+		// Swap values until data[m] reaches the position i.
+		for k := m; k > i; k-- {
+			data[k], data[k-1] = data[k-1], data[k]
+		}
+		return
+	}
+
+	mid := int(uint(a+b) >> 1)
+	n := mid + m
+	var start, r int
+	if m > mid {
+		start = n - b
+		r = mid
+	} else {
+		start = a
+		r = m
+	}
+	p := n - 1
+
+	for start < r {
+		c := int(uint(start+r) >> 1)
+		if !(cmp(data[p-c], data[c]) < 0) {
+			start = c + 1
+		} else {
+			r = c
+		}
+	}
+
+	end := n - start
+	if start < m && m < end {
+		rotateCmpFunc(data, start, m, end, cmp)
+	}
+	if a < start && start < mid {
+		symMergeCmpFunc(data, a, start, mid, cmp)
+	}
+	if mid < end && end < b {
+		symMergeCmpFunc(data, mid, end, b, cmp)
+	}
+}
+
+// rotateCmpFunc rotates two consecutive blocks u = data[a:m] and v = data[m:b] in data:
+// Data of the form 'x u v y' is changed to 'x v u y'.
+// rotate performs at most b-a many calls to data.Swap,
+// and it assumes non-degenerate arguments: a < m && m < b.
+func rotateCmpFunc[E any](data []E, a, m, b int, cmp func(a, b E) int) {
+	i := m - a
+	j := b - m
+
+	for i != j {
+		if i > j {
+			swapRangeCmpFunc(data, m-i, m, j, cmp)
+			i -= j
+		} else {
+			swapRangeCmpFunc(data, m-i, m+j-i, i, cmp)
+			j -= i
+		}
+	}
+	// i == j
+	swapRangeCmpFunc(data, m-i, m, i, cmp)
+}

vendor/golang.org/x/exp/slices/zsortordered.go

@@ -0,0 +1,481 @@
+// Code generated by gen_sort_variants.go; DO NOT EDIT.
+
+// Copyright 2022 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package slices
+
+import "golang.org/x/exp/constraints"
+
+// insertionSortOrdered sorts data[a:b] using insertion sort.
+func insertionSortOrdered[E constraints.Ordered](data []E, a, b int) {
+	for i := a + 1; i < b; i++ {
+		for j := i; j > a && cmpLess(data[j], data[j-1]); j-- {
+			data[j], data[j-1] = data[j-1], data[j]
+		}
+	}
+}
+
+// siftDownOrdered implements the heap property on data[lo:hi].
+// first is an offset into the array where the root of the heap lies.
+func siftDownOrdered[E constraints.Ordered](data []E, lo, hi, first int) {
+	root := lo
+	for {
+		child := 2*root + 1
+		if child >= hi {
+			break
+		}
+		if child+1 < hi && cmpLess(data[first+child], data[first+child+1]) {
+			child++
+		}
+		if !cmpLess(data[first+root], data[first+child]) {
+			return
+		}
+		data[first+root], data[first+child] = data[first+child], data[first+root]
+		root = child
+	}
+}
+
+func heapSortOrdered[E constraints.Ordered](data []E, a, b int) {
+	first := a
+	lo := 0
+	hi := b - a
+
+	// Build heap with greatest element at top.
+	for i := (hi - 1) / 2; i >= 0; i-- {
+		siftDownOrdered(data, i, hi, first)
+	}
+
+	// Pop elements, largest first, into end of data.
+	for i := hi - 1; i >= 0; i-- {
+		data[first], data[first+i] = data[first+i], data[first]
+		siftDownOrdered(data, lo, i, first)
+	}
+}
+
+// pdqsortOrdered sorts data[a:b].
+// The algorithm based on pattern-defeating quicksort(pdqsort), but without the optimizations from BlockQuicksort.
+// pdqsort paper: https://arxiv.org/pdf/2106.05123.pdf
+// C++ implementation: https://github.com/orlp/pdqsort
+// Rust implementation: https://docs.rs/pdqsort/latest/pdqsort/
+// limit is the number of allowed bad (very unbalanced) pivots before falling back to heapsort.
+func pdqsortOrdered[E constraints.Ordered](data []E, a, b, limit int) {
+	const maxInsertion = 12
+
+	var (
+		wasBalanced    = true // whether the last partitioning was reasonably balanced
+		wasPartitioned = true // whether the slice was already partitioned
+	)
+
+	for {
+		length := b - a
+
+		if length <= maxInsertion {
+			insertionSortOrdered(data, a, b)
+			return
+		}
+
+		// Fall back to heapsort if too many bad choices were made.
+		if limit == 0 {
+			heapSortOrdered(data, a, b)
+			return
+		}
+
+		// If the last partitioning was imbalanced, we need to breaking patterns.
+		if !wasBalanced {
+			breakPatternsOrdered(data, a, b)
+			limit--
+		}
+
+		pivot, hint := choosePivotOrdered(data, a, b)
+		if hint == decreasingHint {
+			reverseRangeOrdered(data, a, b)
+			// The chosen pivot was pivot-a elements after the start of the array.
+			// After reversing it is pivot-a elements before the end of the array.
+			// The idea came from Rust's implementation.
+			pivot = (b - 1) - (pivot - a)
+			hint = increasingHint
+		}
+
+		// The slice is likely already sorted.
+		if wasBalanced && wasPartitioned && hint == increasingHint {
+			if partialInsertionSortOrdered(data, a, b) {
+				return
+			}
+		}
+
+		// Probably the slice contains many duplicate elements, partition the slice into
+		// elements equal to and elements greater than the pivot.
+		if a > 0 && !cmpLess(data[a-1], data[pivot]) {
+			mid := partitionEqualOrdered(data, a, b, pivot)
+			a = mid
+			continue
+		}
+
+		mid, alreadyPartitioned := partitionOrdered(data, a, b, pivot)
+		wasPartitioned = alreadyPartitioned
+
+		leftLen, rightLen := mid-a, b-mid
+		balanceThreshold := length / 8
+		if leftLen < rightLen {
+			wasBalanced = leftLen >= balanceThreshold
+			pdqsortOrdered(data, a, mid, limit)
+			a = mid + 1
+		} else {
+			wasBalanced = rightLen >= balanceThreshold
+			pdqsortOrdered(data, mid+1, b, limit)
+			b = mid
+		}
+	}
+}
+
+// partitionOrdered does one quicksort partition.
+// Let p = data[pivot]
+// Moves elements in data[a:b] around, so that data[i]<p and data[j]>=p for i<newpivot and j>newpivot.
+// On return, data[newpivot] = p
+func partitionOrdered[E constraints.Ordered](data []E, a, b, pivot int) (newpivot int, alreadyPartitioned bool) {
+	data[a], data[pivot] = data[pivot], data[a]
+	i, j := a+1, b-1 // i and j are inclusive of the elements remaining to be partitioned
+
+	for i <= j && cmpLess(data[i], data[a]) {
+		i++
+	}
+	for i <= j && !cmpLess(data[j], data[a]) {
+		j--
+	}
+	if i > j {
+		data[j], data[a] = data[a], data[j]
+		return j, true
+	}
+	data[i], data[j] = data[j], data[i]
+	i++
+	j--
+
+	for {
+		for i <= j && cmpLess(data[i], data[a]) {
+			i++
+		}
+		for i <= j && !cmpLess(data[j], data[a]) {
+			j--
+		}
+		if i > j {
+			break
+		}
+		data[i], data[j] = data[j], data[i]
+		i++
+		j--
+	}
+	data[j], data[a] = data[a], data[j]
+	return j, false
+}
+
+// partitionEqualOrdered partitions data[a:b] into elements equal to data[pivot] followed by elements greater than data[pivot].
+// It assumed that data[a:b] does not contain elements smaller than the data[pivot].
+func partitionEqualOrdered[E constraints.Ordered](data []E, a, b, pivot int) (newpivot int) {
+	data[a], data[pivot] = data[pivot], data[a]
+	i, j := a+1, b-1 // i and j are inclusive of the elements remaining to be partitioned
+
+	for {
+		for i <= j && !cmpLess(data[a], data[i]) {
+			i++
+		}
+		for i <= j && cmpLess(data[a], data[j]) {
+			j--
+		}
+		if i > j {
+			break
+		}
+		data[i], data[j] = data[j], data[i]
+		i++
+		j--
+	}
+	return i
+}
+
+// partialInsertionSortOrdered partially sorts a slice, returns true if the slice is sorted at the end.
+func partialInsertionSortOrdered[E constraints.Ordered](data []E, a, b int) bool {
+	const (
+		maxSteps         = 5  // maximum number of adjacent out-of-order pairs that will get shifted
+		shortestShifting = 50 // don't shift any elements on short arrays
+	)
+	i := a + 1
+	for j := 0; j < maxSteps; j++ {
+		for i < b && !cmpLess(data[i], data[i-1]) {
+			i++
+		}
+
+		if i == b {
+			return true
+		}
+
+		if b-a < shortestShifting {
+			return false
+		}
+
+		data[i], data[i-1] = data[i-1], data[i]
+
+		// Shift the smaller one to the left.
+		if i-a >= 2 {
+			for j := i - 1; j >= 1; j-- {
+				if !cmpLess(data[j], data[j-1]) {
+					break
+				}
+				data[j], data[j-1] = data[j-1], data[j]
+			}
+		}
+		// Shift the greater one to the right.
+		if b-i >= 2 {
+			for j := i + 1; j < b; j++ {
+				if !cmpLess(data[j], data[j-1]) {
+					break
+				}
+				data[j], data[j-1] = data[j-1], data[j]
+			}
+		}
+	}
+	return false
+}
+
+// breakPatternsOrdered scatters some elements around in an attempt to break some patterns
+// that might cause imbalanced partitions in quicksort.
+func breakPatternsOrdered[E constraints.Ordered](data []E, a, b int) {
+	length := b - a
+	if length >= 8 {
+		random := xorshift(length)
+		modulus := nextPowerOfTwo(length)
+
+		for idx := a + (length/4)*2 - 1; idx <= a+(length/4)*2+1; idx++ {
+			other := int(uint(random.Next()) & (modulus - 1))
+			if other >= length {
+				other -= length
+			}
+			data[idx], data[a+other] = data[a+other], data[idx]
+		}
+	}
+}
+
+// choosePivotOrdered chooses a pivot in data[a:b].
+//
+// [0,8): chooses a static pivot.
+// [8,shortestNinther): uses the simple median-of-three method.
+// [shortestNinther,∞): uses the Tukey ninther method.
+func choosePivotOrdered[E constraints.Ordered](data []E, a, b int) (pivot int, hint sortedHint) {
+	const (
+		shortestNinther = 50
+		maxSwaps        = 4 * 3
+	)
+
+	l := b - a
+
+	var (
+		swaps int
+		i     = a + l/4*1
+		j     = a + l/4*2
+		k     = a + l/4*3
+	)
+
+	if l >= 8 {
+		if l >= shortestNinther {
+			// Tukey ninther method, the idea came from Rust's implementation.
+			i = medianAdjacentOrdered(data, i, &swaps)
+			j = medianAdjacentOrdered(data, j, &swaps)
+			k = medianAdjacentOrdered(data, k, &swaps)
+		}
+		// Find the median among i, j, k and stores it into j.
+		j = medianOrdered(data, i, j, k, &swaps)
+	}
+
+	switch swaps {
+	case 0:
+		return j, increasingHint
+	case maxSwaps:
+		return j, decreasingHint
+	default:
+		return j, unknownHint
+	}
+}
+
+// order2Ordered returns x,y where data[x] <= data[y], where x,y=a,b or x,y=b,a.
+func order2Ordered[E constraints.Ordered](data []E, a, b int, swaps *int) (int, int) {
+	if cmpLess(data[b], data[a]) {
+		*swaps++
+		return b, a
+	}
+	return a, b
+}
+
+// medianOrdered returns x where data[x] is the median of data[a],data[b],data[c], where x is a, b, or c.
+func medianOrdered[E constraints.Ordered](data []E, a, b, c int, swaps *int) int {
+	a, b = order2Ordered(data, a, b, swaps)
+	b, c = order2Ordered(data, b, c, swaps)
+	a, b = order2Ordered(data, a, b, swaps)
+	return b
+}
+
+// medianAdjacentOrdered finds the median of data[a - 1], data[a], data[a + 1] and stores the index into a.
+func medianAdjacentOrdered[E constraints.Ordered](data []E, a int, swaps *int) int {
+	return medianOrdered(data, a-1, a, a+1, swaps)
+}
+
+func reverseRangeOrdered[E constraints.Ordered](data []E, a, b int) {
+	i := a
+	j := b - 1
+	for i < j {
+		data[i], data[j] = data[j], data[i]
+		i++
+		j--
+	}
+}
+
+func swapRangeOrdered[E constraints.Ordered](data []E, a, b, n int) {
+	for i := 0; i < n; i++ {
+		data[a+i], data[b+i] = data[b+i], data[a+i]
+	}
+}
+
+func stableOrdered[E constraints.Ordered](data []E, n int) {
+	blockSize := 20 // must be > 0
+	a, b := 0, blockSize
+	for b <= n {
+		insertionSortOrdered(data, a, b)
+		a = b
+		b += blockSize
+	}
+	insertionSortOrdered(data, a, n)
+
+	for blockSize < n {
+		a, b = 0, 2*blockSize
+		for b <= n {
+			symMergeOrdered(data, a, a+blockSize, b)
+			a = b
+			b += 2 * blockSize
+		}
+		if m := a + blockSize; m < n {
+			symMergeOrdered(data, a, m, n)
+		}
+		blockSize *= 2
+	}
+}
+
+// symMergeOrdered merges the two sorted subsequences data[a:m] and data[m:b] using
+// the SymMerge algorithm from Pok-Son Kim and Arne Kutzner, "Stable Minimum
+// Storage Merging by Symmetric Comparisons", in Susanne Albers and Tomasz
+// Radzik, editors, Algorithms - ESA 2004, volume 3221 of Lecture Notes in
+// Computer Science, pages 714-723. Springer, 2004.
+//
+// Let M = m-a and N = b-n. Wolog M < N.
+// The recursion depth is bound by ceil(log(N+M)).
+// The algorithm needs O(M*log(N/M + 1)) calls to data.Less.
+// The algorithm needs O((M+N)*log(M)) calls to data.Swap.
+//
+// The paper gives O((M+N)*log(M)) as the number of assignments assuming a
+// rotation algorithm which uses O(M+N+gcd(M+N)) assignments. The argumentation
+// in the paper carries through for Swap operations, especially as the block
+// swapping rotate uses only O(M+N) Swaps.
+//
+// symMerge assumes non-degenerate arguments: a < m && m < b.
+// Having the caller check this condition eliminates many leaf recursion calls,
+// which improves performance.
+func symMergeOrdered[E constraints.Ordered](data []E, a, m, b int) {
+	// Avoid unnecessary recursions of symMerge
+	// by direct insertion of data[a] into data[m:b]
+	// if data[a:m] only contains one element.
+	if m-a == 1 {
+		// Use binary search to find the lowest index i
+		// such that data[i] >= data[a] for m <= i < b.
+		// Exit the search loop with i == b in case no such index exists.
+		i := m
+		j := b
+		for i < j {
+			h := int(uint(i+j) >> 1)
+			if cmpLess(data[h], data[a]) {
+				i = h + 1
+			} else {
+				j = h
+			}
+		}
+		// Swap values until data[a] reaches the position before i.
+		for k := a; k < i-1; k++ {
+			data[k], data[k+1] = data[k+1], data[k]
+		}
+		return
+	}
+
+	// Avoid unnecessary recursions of symMerge
+	// by direct insertion of data[m] into data[a:m]
+	// if data[m:b] only contains one element.
+	if b-m == 1 {
+		// Use binary search to find the lowest index i
+		// such that data[i] > data[m] for a <= i < m.
+		// Exit the search loop with i == m in case no such index exists.
+		i := a
+		j := m
+		for i < j {
+			h := int(uint(i+j) >> 1)
+			if !cmpLess(data[m], data[h]) {
+				i = h + 1
+			} else {
+				j = h
+			}
+		}
+		// Swap values until data[m] reaches the position i.
+		for k := m; k > i; k-- {
+			data[k], data[k-1] = data[k-1], data[k]
+		}
+		return
+	}
+
+	mid := int(uint(a+b) >> 1)
+	n := mid + m
+	var start, r int
+	if m > mid {
+		start = n - b
+		r = mid
+	} else {
+		start = a
+		r = m
+	}
+	p := n - 1
+
+	for start < r {
+		c := int(uint(start+r) >> 1)
+		if !cmpLess(data[p-c], data[c]) {
+			start = c + 1
+		} else {
+			r = c
+		}
+	}
+
+	end := n - start
+	if start < m && m < end {
+		rotateOrdered(data, start, m, end)
+	}
+	if a < start && start < mid {
+		symMergeOrdered(data, a, start, mid)
+	}
+	if mid < end && end < b {
+		symMergeOrdered(data, mid, end, b)
+	}
+}
+
+// rotateOrdered rotates two consecutive blocks u = data[a:m] and v = data[m:b] in data:
+// Data of the form 'x u v y' is changed to 'x v u y'.
+// rotate performs at most b-a many calls to data.Swap,
+// and it assumes non-degenerate arguments: a < m && m < b.
+func rotateOrdered[E constraints.Ordered](data []E, a, m, b int) {
+	i := m - a
+	j := b - m
+
+	for i != j {
+		if i > j {
+			swapRangeOrdered(data, m-i, m, j)
+			i -= j
+		} else {
+			swapRangeOrdered(data, m-i, m+j-i, i)
+			j -= i
+		}
+	}
+	// i == j
+	swapRangeOrdered(data, m-i, m, i)
+}

vendor/golang.org/x/exp/slog/attr.go

@@ -0,0 +1,102 @@
+// Copyright 2022 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package slog
+
+import (
+	"fmt"
+	"time"
+)
+
+// An Attr is a key-value pair.
+type Attr struct {
+	Key   string
+	Value Value
+}
+
+// String returns an Attr for a string value.
+func String(key, value string) Attr {
+	return Attr{key, StringValue(value)}
+}
+
+// Int64 returns an Attr for an int64.
+func Int64(key string, value int64) Attr {
+	return Attr{key, Int64Value(value)}
+}
+
+// Int converts an int to an int64 and returns
+// an Attr with that value.
+func Int(key string, value int) Attr {
+	return Int64(key, int64(value))
+}
+
+// Uint64 returns an Attr for a uint64.
+func Uint64(key string, v uint64) Attr {
+	return Attr{key, Uint64Value(v)}
+}
+
+// Float64 returns an Attr for a floating-point number.
+func Float64(key string, v float64) Attr {
+	return Attr{key, Float64Value(v)}
+}
+
+// Bool returns an Attr for a bool.
+func Bool(key string, v bool) Attr {
+	return Attr{key, BoolValue(v)}
+}
+
+// Time returns an Attr for a time.Time.
+// It discards the monotonic portion.
+func Time(key string, v time.Time) Attr {
+	return Attr{key, TimeValue(v)}
+}
+
+// Duration returns an Attr for a time.Duration.
+func Duration(key string, v time.Duration) Attr {
+	return Attr{key, DurationValue(v)}
+}
+
+// Group returns an Attr for a Group Value.
+// The first argument is the key; the remaining arguments
+// are converted to Attrs as in [Logger.Log].
+//
+// Use Group to collect several key-value pairs under a single
+// key on a log line, or as the result of LogValue
+// in order to log a single value as multiple Attrs.
+func Group(key string, args ...any) Attr {
+	return Attr{key, GroupValue(argsToAttrSlice(args)...)}
+}
+
+func argsToAttrSlice(args []any) []Attr {
+	var (
+		attr  Attr
+		attrs []Attr
+	)
+	for len(args) > 0 {
+		attr, args = argsToAttr(args)
+		attrs = append(attrs, attr)
+	}
+	return attrs
+}
+
+// Any returns an Attr for the supplied value.
+// See [Value.AnyValue] for how values are treated.
+func Any(key string, value any) Attr {
+	return Attr{key, AnyValue(value)}
+}
+
+// Equal reports whether a and b have equal keys and values.
+func (a Attr) Equal(b Attr) bool {
+	return a.Key == b.Key && a.Value.Equal(b.Value)
+}
+
+func (a Attr) String() string {
+	return fmt.Sprintf("%s=%s", a.Key, a.Value)
+}
+
+// isEmpty reports whether a has an empty key and a nil value.
+// That can be written as Attr{} or Any("", nil).
+func (a Attr) isEmpty() bool {
+	return a.Key == "" && a.Value.num == 0 && a.Value.any == nil
+}

vendor/golang.org/x/exp/slog/doc.go

@@ -0,0 +1,316 @@
+// Copyright 2022 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+/*
+Package slog provides structured logging,
+in which log records include a message,
+a severity level, and various other attributes
+expressed as key-value pairs.
+
+It defines a type, [Logger],
+which provides several methods (such as [Logger.Info] and [Logger.Error])
+for reporting events of interest.
+
+Each Logger is associated with a [Handler].
+A Logger output method creates a [Record] from the method arguments
+and passes it to the Handler, which decides how to handle it.
+There is a default Logger accessible through top-level functions
+(such as [Info] and [Error]) that call the corresponding Logger methods.
+
+A log record consists of a time, a level, a message, and a set of key-value
+pairs, where the keys are strings and the values may be of any type.
+As an example,
+
+	slog.Info("hello", "count", 3)
+
+creates a record containing the time of the call,
+a level of Info, the message "hello", and a single
+pair with key "count" and value 3.
+
+The [Info] top-level function calls the [Logger.Info] method on the default Logger.
+In addition to [Logger.Info], there are methods for Debug, Warn and Error levels.
+Besides these convenience methods for common levels,
+there is also a [Logger.Log] method which takes the level as an argument.
+Each of these methods has a corresponding top-level function that uses the
+default logger.
+
+The default handler formats the log record's message, time, level, and attributes
+as a string and passes it to the [log] package.
+
+	2022/11/08 15:28:26 INFO hello count=3
+
+For more control over the output format, create a logger with a different handler.
+This statement uses [New] to create a new logger with a TextHandler
+that writes structured records in text form to standard error:
+
+	logger := slog.New(slog.NewTextHandler(os.Stderr, nil))
+
+[TextHandler] output is a sequence of key=value pairs, easily and unambiguously
+parsed by machine. This statement:
+
+	logger.Info("hello", "count", 3)
+
+produces this output:
+
+	time=2022-11-08T15:28:26.000-05:00 level=INFO msg=hello count=3
+
+The package also provides [JSONHandler], whose output is line-delimited JSON:
+
+	logger := slog.New(slog.NewJSONHandler(os.Stdout, nil))
+	logger.Info("hello", "count", 3)
+
+produces this output:
+
+	{"time":"2022-11-08T15:28:26.000000000-05:00","level":"INFO","msg":"hello","count":3}
+
+Both [TextHandler] and [JSONHandler] can be configured with [HandlerOptions].
+There are options for setting the minimum level (see Levels, below),
+displaying the source file and line of the log call, and
+modifying attributes before they are logged.
+
+Setting a logger as the default with
+
+	slog.SetDefault(logger)
+
+will cause the top-level functions like [Info] to use it.
+[SetDefault] also updates the default logger used by the [log] package,
+so that existing applications that use [log.Printf] and related functions
+will send log records to the logger's handler without needing to be rewritten.
+
+Some attributes are common to many log calls.
+For example, you may wish to include the URL or trace identifier of a server request
+with all log events arising from the request.
+Rather than repeat the attribute with every log call, you can use [Logger.With]
+to construct a new Logger containing the attributes:
+
+	logger2 := logger.With("url", r.URL)
+
+The arguments to With are the same key-value pairs used in [Logger.Info].
+The result is a new Logger with the same handler as the original, but additional
+attributes that will appear in the output of every call.
+
+# Levels
+
+A [Level] is an integer representing the importance or severity of a log event.
+The higher the level, the more severe the event.
+This package defines constants for the most common levels,
+but any int can be used as a level.
+
+In an application, you may wish to log messages only at a certain level or greater.
+One common configuration is to log messages at Info or higher levels,
+suppressing debug logging until it is needed.
+The built-in handlers can be configured with the minimum level to output by
+setting [HandlerOptions.Level].
+The program's `main` function typically does this.
+The default value is LevelInfo.
+
+Setting the [HandlerOptions.Level] field to a [Level] value
+fixes the handler's minimum level throughout its lifetime.
+Setting it to a [LevelVar] allows the level to be varied dynamically.
+A LevelVar holds a Level and is safe to read or write from multiple
+goroutines.
+To vary the level dynamically for an entire program, first initialize
+a global LevelVar:
+
+	var programLevel = new(slog.LevelVar) // Info by default
+
+Then use the LevelVar to construct a handler, and make it the default:
+
+	h := slog.NewJSONHandler(os.Stderr, &slog.HandlerOptions{Level: programLevel})
+	slog.SetDefault(slog.New(h))
+
+Now the program can change its logging level with a single statement:
+
+	programLevel.Set(slog.LevelDebug)
+
+# Groups
+
+Attributes can be collected into groups.
+A group has a name that is used to qualify the names of its attributes.
+How this qualification is displayed depends on the handler.
+[TextHandler] separates the group and attribute names with a dot.
+[JSONHandler] treats each group as a separate JSON object, with the group name as the key.
+
+Use [Group] to create a Group attribute from a name and a list of key-value pairs:
+
+	slog.Group("request",
+	    "method", r.Method,
+	    "url", r.URL)
+
+TextHandler would display this group as
+
+	request.method=GET request.url=http://example.com
+
+JSONHandler would display it as
+
+	"request":{"method":"GET","url":"http://example.com"}
+
+Use [Logger.WithGroup] to qualify all of a Logger's output
+with a group name. Calling WithGroup on a Logger results in a
+new Logger with the same Handler as the original, but with all
+its attributes qualified by the group name.
+
+This can help prevent duplicate attribute keys in large systems,
+where subsystems might use the same keys.
+Pass each subsystem a different Logger with its own group name so that
+potential duplicates are qualified:
+
+	logger := slog.Default().With("id", systemID)
+	parserLogger := logger.WithGroup("parser")
+	parseInput(input, parserLogger)
+
+When parseInput logs with parserLogger, its keys will be qualified with "parser",
+so even if it uses the common key "id", the log line will have distinct keys.
+
+# Contexts
+
+Some handlers may wish to include information from the [context.Context] that is
+available at the call site. One example of such information
+is the identifier for the current span when tracing is enabled.
+
+The [Logger.Log] and [Logger.LogAttrs] methods take a context as a first
+argument, as do their corresponding top-level functions.
+
+Although the convenience methods on Logger (Info and so on) and the
+corresponding top-level functions do not take a context, the alternatives ending
+in "Context" do. For example,
+
+	slog.InfoContext(ctx, "message")
+
+It is recommended to pass a context to an output method if one is available.
+
+# Attrs and Values
+
+An [Attr] is a key-value pair. The Logger output methods accept Attrs as well as
+alternating keys and values. The statement
+
+	slog.Info("hello", slog.Int("count", 3))
+
+behaves the same as
+
+	slog.Info("hello", "count", 3)
+
+There are convenience constructors for [Attr] such as [Int], [String], and [Bool]
+for common types, as well as the function [Any] for constructing Attrs of any
+type.
+
+The value part of an Attr is a type called [Value].
+Like an [any], a Value can hold any Go value,
+but it can represent typical values, including all numbers and strings,
+without an allocation.
+
+For the most efficient log output, use [Logger.LogAttrs].
+It is similar to [Logger.Log] but accepts only Attrs, not alternating
+keys and values; this allows it, too, to avoid allocation.
+
+The call
+
+	logger.LogAttrs(nil, slog.LevelInfo, "hello", slog.Int("count", 3))
+
+is the most efficient way to achieve the same output as
+
+	slog.Info("hello", "count", 3)
+
+# Customizing a type's logging behavior
+
+If a type implements the [LogValuer] interface, the [Value] returned from its LogValue
+method is used for logging. You can use this to control how values of the type
+appear in logs. For example, you can redact secret information like passwords,
+or gather a struct's fields in a Group. See the examples under [LogValuer] for
+details.
+
+A LogValue method may return a Value that itself implements [LogValuer]. The [Value.Resolve]
+method handles these cases carefully, avoiding infinite loops and unbounded recursion.
+Handler authors and others may wish to use Value.Resolve instead of calling LogValue directly.
+
+# Wrapping output methods
+
+The logger functions use reflection over the call stack to find the file name
+and line number of the logging call within the application. This can produce
+incorrect source information for functions that wrap slog. For instance, if you
+define this function in file mylog.go:
+
+	func Infof(format string, args ...any) {
+	    slog.Default().Info(fmt.Sprintf(format, args...))
+	}
+
+and you call it like this in main.go:
+
+	Infof(slog.Default(), "hello, %s", "world")
+
+then slog will report the source file as mylog.go, not main.go.
+
+A correct implementation of Infof will obtain the source location
+(pc) and pass it to NewRecord.
+The Infof function in the package-level example called "wrapping"
+demonstrates how to do this.
+
+# Working with Records
+
+Sometimes a Handler will need to modify a Record
+before passing it on to another Handler or backend.
+A Record contains a mixture of simple public fields (e.g. Time, Level, Message)
+and hidden fields that refer to state (such as attributes) indirectly. This
+means that modifying a simple copy of a Record (e.g. by calling
+[Record.Add] or [Record.AddAttrs] to add attributes)
+may have unexpected effects on the original.
+Before modifying a Record, use [Clone] to
+create a copy that shares no state with the original,
+or create a new Record with [NewRecord]
+and build up its Attrs by traversing the old ones with [Record.Attrs].
+
+# Performance considerations
+
+If profiling your application demonstrates that logging is taking significant time,
+the following suggestions may help.
+
+If many log lines have a common attribute, use [Logger.With] to create a Logger with
+that attribute. The built-in handlers will format that attribute only once, at the
+call to [Logger.With]. The [Handler] interface is designed to allow that optimization,
+and a well-written Handler should take advantage of it.
+
+The arguments to a log call are always evaluated, even if the log event is discarded.
+If possible, defer computation so that it happens only if the value is actually logged.
+For example, consider the call
+
+	slog.Info("starting request", "url", r.URL.String())  // may compute String unnecessarily
+
+The URL.String method will be called even if the logger discards Info-level events.
+Instead, pass the URL directly:
+
+	slog.Info("starting request", "url", &r.URL) // calls URL.String only if needed
+
+The built-in [TextHandler] will call its String method, but only
+if the log event is enabled.
+Avoiding the call to String also preserves the structure of the underlying value.
+For example [JSONHandler] emits the components of the parsed URL as a JSON object.
+If you want to avoid eagerly paying the cost of the String call
+without causing the handler to potentially inspect the structure of the value,
+wrap the value in a fmt.Stringer implementation that hides its Marshal methods.
+
+You can also use the [LogValuer] interface to avoid unnecessary work in disabled log
+calls. Say you need to log some expensive value:
+
+	slog.Debug("frobbing", "value", computeExpensiveValue(arg))
+
+Even if this line is disabled, computeExpensiveValue will be called.
+To avoid that, define a type implementing LogValuer:
+
+	type expensive struct { arg int }
+
+	func (e expensive) LogValue() slog.Value {
+	    return slog.AnyValue(computeExpensiveValue(e.arg))
+	}
+
+Then use a value of that type in log calls:
+
+	slog.Debug("frobbing", "value", expensive{arg})
+
+Now computeExpensiveValue will only be called when the line is enabled.
+
+The built-in handlers acquire a lock before calling [io.Writer.Write]
+to ensure that each record is written in one piece. User-defined
+handlers are responsible for their own locking.
+*/
+package slog

vendor/golang.org/x/exp/slog/handler.go

@@ -0,0 +1,559 @@
+// Copyright 2022 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package slog
+
+import (
+	"context"
+	"fmt"
+	"io"
+	"strconv"
+	"sync"
+	"time"
+
+	"golang.org/x/exp/slices"
+	"golang.org/x/exp/slog/internal/buffer"
+)
+
+// A Handler handles log records produced by a Logger..
+//
+// A typical handler may print log records to standard error,
+// or write them to a file or database, or perhaps augment them
+// with additional attributes and pass them on to another handler.
+//
+// Any of the Handler's methods may be called concurrently with itself
+// or with other methods. It is the responsibility of the Handler to
+// manage this concurrency.
+//
+// Users of the slog package should not invoke Handler methods directly.
+// They should use the methods of [Logger] instead.
+type Handler interface {
+	// Enabled reports whether the handler handles records at the given level.
+	// The handler ignores records whose level is lower.
+	// It is called early, before any arguments are processed,
+	// to save effort if the log event should be discarded.
+	// If called from a Logger method, the first argument is the context
+	// passed to that method, or context.Background() if nil was passed
+	// or the method does not take a context.
+	// The context is passed so Enabled can use its values
+	// to make a decision.
+	Enabled(context.Context, Level) bool
+
+	// Handle handles the Record.
+	// It will only be called when Enabled returns true.
+	// The Context argument is as for Enabled.
+	// It is present solely to provide Handlers access to the context's values.
+	// Canceling the context should not affect record processing.
+	// (Among other things, log messages may be necessary to debug a
+	// cancellation-related problem.)
+	//
+	// Handle methods that produce output should observe the following rules:
+	//   - If r.Time is the zero time, ignore the time.
+	//   - If r.PC is zero, ignore it.
+	//   - Attr's values should be resolved.
+	//   - If an Attr's key and value are both the zero value, ignore the Attr.
+	//     This can be tested with attr.Equal(Attr{}).
+	//   - If a group's key is empty, inline the group's Attrs.
+	//   - If a group has no Attrs (even if it has a non-empty key),
+	//     ignore it.
+	Handle(context.Context, Record) error
+
+	// WithAttrs returns a new Handler whose attributes consist of
+	// both the receiver's attributes and the arguments.
+	// The Handler owns the slice: it may retain, modify or discard it.
+	WithAttrs(attrs []Attr) Handler
+
+	// WithGroup returns a new Handler with the given group appended to
+	// the receiver's existing groups.
+	// The keys of all subsequent attributes, whether added by With or in a
+	// Record, should be qualified by the sequence of group names.
+	//
+	// How this qualification happens is up to the Handler, so long as
+	// this Handler's attribute keys differ from those of another Handler
+	// with a different sequence of group names.
+	//
+	// A Handler should treat WithGroup as starting a Group of Attrs that ends
+	// at the end of the log event. That is,
+	//
+	//     logger.WithGroup("s").LogAttrs(level, msg, slog.Int("a", 1), slog.Int("b", 2))
+	//
+	// should behave like
+	//
+	//     logger.LogAttrs(level, msg, slog.Group("s", slog.Int("a", 1), slog.Int("b", 2)))
+	//
+	// If the name is empty, WithGroup returns the receiver.
+	WithGroup(name string) Handler
+}
+
+type defaultHandler struct {
+	ch *commonHandler
+	// log.Output, except for testing
+	output func(calldepth int, message string) error
+}
+
+func newDefaultHandler(output func(int, string) error) *defaultHandler {
+	return &defaultHandler{
+		ch:     &commonHandler{json: false},
+		output: output,
+	}
+}
+
+func (*defaultHandler) Enabled(_ context.Context, l Level) bool {
+	return l >= LevelInfo
+}
+
+// Collect the level, attributes and message in a string and
+// write it with the default log.Logger.
+// Let the log.Logger handle time and file/line.
+func (h *defaultHandler) Handle(ctx context.Context, r Record) error {
+	buf := buffer.New()
+	buf.WriteString(r.Level.String())
+	buf.WriteByte(' ')
+	buf.WriteString(r.Message)
+	state := h.ch.newHandleState(buf, true, " ", nil)
+	defer state.free()
+	state.appendNonBuiltIns(r)
+
+	// skip [h.output, defaultHandler.Handle, handlerWriter.Write, log.Output]
+	return h.output(4, buf.String())
+}
+
+func (h *defaultHandler) WithAttrs(as []Attr) Handler {
+	return &defaultHandler{h.ch.withAttrs(as), h.output}
+}
+
+func (h *defaultHandler) WithGroup(name string) Handler {
+	return &defaultHandler{h.ch.withGroup(name), h.output}
+}
+
+// HandlerOptions are options for a TextHandler or JSONHandler.
+// A zero HandlerOptions consists entirely of default values.
+type HandlerOptions struct {
+	// AddSource causes the handler to compute the source code position
+	// of the log statement and add a SourceKey attribute to the output.
+	AddSource bool
+
+	// Level reports the minimum record level that will be logged.
+	// The handler discards records with lower levels.
+	// If Level is nil, the handler assumes LevelInfo.
+	// The handler calls Level.Level for each record processed;
+	// to adjust the minimum level dynamically, use a LevelVar.
+	Level Leveler
+
+	// ReplaceAttr is called to rewrite each non-group attribute before it is logged.
+	// The attribute's value has been resolved (see [Value.Resolve]).
+	// If ReplaceAttr returns an Attr with Key == "", the attribute is discarded.
+	//
+	// The built-in attributes with keys "time", "level", "source", and "msg"
+	// are passed to this function, except that time is omitted
+	// if zero, and source is omitted if AddSource is false.
+	//
+	// The first argument is a list of currently open groups that contain the
+	// Attr. It must not be retained or modified. ReplaceAttr is never called
+	// for Group attributes, only their contents. For example, the attribute
+	// list
+	//
+	//     Int("a", 1), Group("g", Int("b", 2)), Int("c", 3)
+	//
+	// results in consecutive calls to ReplaceAttr with the following arguments:
+	//
+	//     nil, Int("a", 1)
+	//     []string{"g"}, Int("b", 2)
+	//     nil, Int("c", 3)
+	//
+	// ReplaceAttr can be used to change the default keys of the built-in
+	// attributes, convert types (for example, to replace a `time.Time` with the
+	// integer seconds since the Unix epoch), sanitize personal information, or
+	// remove attributes from the output.
+	ReplaceAttr func(groups []string, a Attr) Attr
+}
+
+// Keys for "built-in" attributes.
+const (
+	// TimeKey is the key used by the built-in handlers for the time
+	// when the log method is called. The associated Value is a [time.Time].
+	TimeKey = "time"
+	// LevelKey is the key used by the built-in handlers for the level
+	// of the log call. The associated value is a [Level].
+	LevelKey = "level"
+	// MessageKey is the key used by the built-in handlers for the
+	// message of the log call. The associated value is a string.
+	MessageKey = "msg"
+	// SourceKey is the key used by the built-in handlers for the source file
+	// and line of the log call. The associated value is a string.
+	SourceKey = "source"
+)
+
+type commonHandler struct {
+	json              bool // true => output JSON; false => output text
+	opts              HandlerOptions
+	preformattedAttrs []byte
+	groupPrefix       string   // for text: prefix of groups opened in preformatting
+	groups            []string // all groups started from WithGroup
+	nOpenGroups       int      // the number of groups opened in preformattedAttrs
+	mu                sync.Mutex
+	w                 io.Writer
+}
+
+func (h *commonHandler) clone() *commonHandler {
+	// We can't use assignment because we can't copy the mutex.
+	return &commonHandler{
+		json:              h.json,
+		opts:              h.opts,
+		preformattedAttrs: slices.Clip(h.preformattedAttrs),
+		groupPrefix:       h.groupPrefix,
+		groups:            slices.Clip(h.groups),
+		nOpenGroups:       h.nOpenGroups,
+		w:                 h.w,
+	}
+}
+
+// enabled reports whether l is greater than or equal to the
+// minimum level.
+func (h *commonHandler) enabled(l Level) bool {
+	minLevel := LevelInfo
+	if h.opts.Level != nil {
+		minLevel = h.opts.Level.Level()
+	}
+	return l >= minLevel
+}
+
+func (h *commonHandler) withAttrs(as []Attr) *commonHandler {
+	h2 := h.clone()
+	// Pre-format the attributes as an optimization.
+	prefix := buffer.New()
+	defer prefix.Free()
+	prefix.WriteString(h.groupPrefix)
+	state := h2.newHandleState((*buffer.Buffer)(&h2.preformattedAttrs), false, "", prefix)
+	defer state.free()
+	if len(h2.preformattedAttrs) > 0 {
+		state.sep = h.attrSep()
+	}
+	state.openGroups()
+	for _, a := range as {
+		state.appendAttr(a)
+	}
+	// Remember the new prefix for later keys.
+	h2.groupPrefix = state.prefix.String()
+	// Remember how many opened groups are in preformattedAttrs,
+	// so we don't open them again when we handle a Record.
+	h2.nOpenGroups = len(h2.groups)
+	return h2
+}
+
+func (h *commonHandler) withGroup(name string) *commonHandler {
+	if name == "" {
+		return h
+	}
+	h2 := h.clone()
+	h2.groups = append(h2.groups, name)
+	return h2
+}
+
+func (h *commonHandler) handle(r Record) error {
+	state := h.newHandleState(buffer.New(), true, "", nil)
+	defer state.free()
+	if h.json {
+		state.buf.WriteByte('{')
+	}
+	// Built-in attributes. They are not in a group.
+	stateGroups := state.groups
+	state.groups = nil // So ReplaceAttrs sees no groups instead of the pre groups.
+	rep := h.opts.ReplaceAttr
+	// time
+	if !r.Time.IsZero() {
+		key := TimeKey
+		val := r.Time.Round(0) // strip monotonic to match Attr behavior
+		if rep == nil {
+			state.appendKey(key)
+			state.appendTime(val)
+		} else {
+			state.appendAttr(Time(key, val))
+		}
+	}
+	// level
+	key := LevelKey
+	val := r.Level
+	if rep == nil {
+		state.appendKey(key)
+		state.appendString(val.String())
+	} else {
+		state.appendAttr(Any(key, val))
+	}
+	// source
+	if h.opts.AddSource {
+		state.appendAttr(Any(SourceKey, r.source()))
+	}
+	key = MessageKey
+	msg := r.Message
+	if rep == nil {
+		state.appendKey(key)
+		state.appendString(msg)
+	} else {
+		state.appendAttr(String(key, msg))
+	}
+	state.groups = stateGroups // Restore groups passed to ReplaceAttrs.
+	state.appendNonBuiltIns(r)
+	state.buf.WriteByte('\n')
+
+	h.mu.Lock()
+	defer h.mu.Unlock()
+	_, err := h.w.Write(*state.buf)
+	return err
+}
+
+func (s *handleState) appendNonBuiltIns(r Record) {
+	// preformatted Attrs
+	if len(s.h.preformattedAttrs) > 0 {
+		s.buf.WriteString(s.sep)
+		s.buf.Write(s.h.preformattedAttrs)
+		s.sep = s.h.attrSep()
+	}
+	// Attrs in Record -- unlike the built-in ones, they are in groups started
+	// from WithGroup.
+	s.prefix = buffer.New()
+	defer s.prefix.Free()
+	s.prefix.WriteString(s.h.groupPrefix)
+	s.openGroups()
+	r.Attrs(func(a Attr) bool {
+		s.appendAttr(a)
+		return true
+	})
+	if s.h.json {
+		// Close all open groups.
+		for range s.h.groups {
+			s.buf.WriteByte('}')
+		}
+		// Close the top-level object.
+		s.buf.WriteByte('}')
+	}
+}
+
+// attrSep returns the separator between attributes.
+func (h *commonHandler) attrSep() string {
+	if h.json {
+		return ","
+	}
+	return " "
+}
+
+// handleState holds state for a single call to commonHandler.handle.
+// The initial value of sep determines whether to emit a separator
+// before the next key, after which it stays true.
+type handleState struct {
+	h       *commonHandler
+	buf     *buffer.Buffer
+	freeBuf bool           // should buf be freed?
+	sep     string         // separator to write before next key
+	prefix  *buffer.Buffer // for text: key prefix
+	groups  *[]string      // pool-allocated slice of active groups, for ReplaceAttr
+}
+
+var groupPool = sync.Pool{New: func() any {
+	s := make([]string, 0, 10)
+	return &s
+}}
+
+func (h *commonHandler) newHandleState(buf *buffer.Buffer, freeBuf bool, sep string, prefix *buffer.Buffer) handleState {
+	s := handleState{
+		h:       h,
+		buf:     buf,
+		freeBuf: freeBuf,
+		sep:     sep,
+		prefix:  prefix,
+	}
+	if h.opts.ReplaceAttr != nil {
+		s.groups = groupPool.Get().(*[]string)
+		*s.groups = append(*s.groups, h.groups[:h.nOpenGroups]...)
+	}
+	return s
+}
+
+func (s *handleState) free() {
+	if s.freeBuf {
+		s.buf.Free()
+	}
+	if gs := s.groups; gs != nil {
+		*gs = (*gs)[:0]
+		groupPool.Put(gs)
+	}
+}
+
+func (s *handleState) openGroups() {
+	for _, n := range s.h.groups[s.h.nOpenGroups:] {
+		s.openGroup(n)
+	}
+}
+
+// Separator for group names and keys.
+const keyComponentSep = '.'
+
+// openGroup starts a new group of attributes
+// with the given name.
+func (s *handleState) openGroup(name string) {
+	if s.h.json {
+		s.appendKey(name)
+		s.buf.WriteByte('{')
+		s.sep = ""
+	} else {
+		s.prefix.WriteString(name)
+		s.prefix.WriteByte(keyComponentSep)
+	}
+	// Collect group names for ReplaceAttr.
+	if s.groups != nil {
+		*s.groups = append(*s.groups, name)
+	}
+}
+
+// closeGroup ends the group with the given name.
+func (s *handleState) closeGroup(name string) {
+	if s.h.json {
+		s.buf.WriteByte('}')
+	} else {
+		(*s.prefix) = (*s.prefix)[:len(*s.prefix)-len(name)-1 /* for keyComponentSep */]
+	}
+	s.sep = s.h.attrSep()
+	if s.groups != nil {
+		*s.groups = (*s.groups)[:len(*s.groups)-1]
+	}
+}
+
+// appendAttr appends the Attr's key and value using app.
+// It handles replacement and checking for an empty key.
+// after replacement).
+func (s *handleState) appendAttr(a Attr) {
+	if rep := s.h.opts.ReplaceAttr; rep != nil && a.Value.Kind() != KindGroup {
+		var gs []string
+		if s.groups != nil {
+			gs = *s.groups
+		}
+		// Resolve before calling ReplaceAttr, so the user doesn't have to.
+		a.Value = a.Value.Resolve()
+		a = rep(gs, a)
+	}
+	a.Value = a.Value.Resolve()
+	// Elide empty Attrs.
+	if a.isEmpty() {
+		return
+	}
+	// Special case: Source.
+	if v := a.Value; v.Kind() == KindAny {
+		if src, ok := v.Any().(*Source); ok {
+			if s.h.json {
+				a.Value = src.group()
+			} else {
+				a.Value = StringValue(fmt.Sprintf("%s:%d", src.File, src.Line))
+			}
+		}
+	}
+	if a.Value.Kind() == KindGroup {
+		attrs := a.Value.Group()
+		// Output only non-empty groups.
+		if len(attrs) > 0 {
+			// Inline a group with an empty key.
+			if a.Key != "" {
+				s.openGroup(a.Key)
+			}
+			for _, aa := range attrs {
+				s.appendAttr(aa)
+			}
+			if a.Key != "" {
+				s.closeGroup(a.Key)
+			}
+		}
+	} else {
+		s.appendKey(a.Key)
+		s.appendValue(a.Value)
+	}
+}
+
+func (s *handleState) appendError(err error) {
+	s.appendString(fmt.Sprintf("!ERROR:%v", err))
+}
+
+func (s *handleState) appendKey(key string) {
+	s.buf.WriteString(s.sep)
+	if s.prefix != nil {
+		// TODO: optimize by avoiding allocation.
+		s.appendString(string(*s.prefix) + key)
+	} else {
+		s.appendString(key)
+	}
+	if s.h.json {
+		s.buf.WriteByte(':')
+	} else {
+		s.buf.WriteByte('=')
+	}
+	s.sep = s.h.attrSep()
+}
+
+func (s *handleState) appendString(str string) {
+	if s.h.json {
+		s.buf.WriteByte('"')
+		*s.buf = appendEscapedJSONString(*s.buf, str)
+		s.buf.WriteByte('"')
+	} else {
+		// text
+		if needsQuoting(str) {
+			*s.buf = strconv.AppendQuote(*s.buf, str)
+		} else {
+			s.buf.WriteString(str)
+		}
+	}
+}
+
+func (s *handleState) appendValue(v Value) {
+	var err error
+	if s.h.json {
+		err = appendJSONValue(s, v)
+	} else {
+		err = appendTextValue(s, v)
+	}
+	if err != nil {
+		s.appendError(err)
+	}
+}
+
+func (s *handleState) appendTime(t time.Time) {
+	if s.h.json {
+		appendJSONTime(s, t)
+	} else {
+		writeTimeRFC3339Millis(s.buf, t)
+	}
+}
+
+// This takes half the time of Time.AppendFormat.
+func writeTimeRFC3339Millis(buf *buffer.Buffer, t time.Time) {
+	year, month, day := t.Date()
+	buf.WritePosIntWidth(year, 4)
+	buf.WriteByte('-')
+	buf.WritePosIntWidth(int(month), 2)
+	buf.WriteByte('-')
+	buf.WritePosIntWidth(day, 2)
+	buf.WriteByte('T')
+	hour, min, sec := t.Clock()
+	buf.WritePosIntWidth(hour, 2)
+	buf.WriteByte(':')
+	buf.WritePosIntWidth(min, 2)
+	buf.WriteByte(':')
+	buf.WritePosIntWidth(sec, 2)
+	ns := t.Nanosecond()
+	buf.WriteByte('.')
+	buf.WritePosIntWidth(ns/1e6, 3)
+	_, offsetSeconds := t.Zone()
+	if offsetSeconds == 0 {
+		buf.WriteByte('Z')
+	} else {
+		offsetMinutes := offsetSeconds / 60
+		if offsetMinutes < 0 {
+			buf.WriteByte('-')
+			offsetMinutes = -offsetMinutes
+		} else {
+			buf.WriteByte('+')
+		}
+		buf.WritePosIntWidth(offsetMinutes/60, 2)
+		buf.WriteByte(':')
+		buf.WritePosIntWidth(offsetMinutes%60, 2)
+	}
+}

vendor/golang.org/x/exp/slog/internal/buffer/buffer.go

@@ -0,0 +1,84 @@
+// Copyright 2022 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package buffer provides a pool-allocated byte buffer.
+package buffer
+
+import (
+	"sync"
+)
+
+// Buffer adapted from go/src/fmt/print.go
+type Buffer []byte
+
+// Having an initial size gives a dramatic speedup.
+var bufPool = sync.Pool{
+	New: func() any {
+		b := make([]byte, 0, 1024)
+		return (*Buffer)(&b)
+	},
+}
+
+func New() *Buffer {
+	return bufPool.Get().(*Buffer)
+}
+
+func (b *Buffer) Free() {
+	// To reduce peak allocation, return only smaller buffers to the pool.
+	const maxBufferSize = 16 << 10
+	if cap(*b) <= maxBufferSize {
+		*b = (*b)[:0]
+		bufPool.Put(b)
+	}
+}
+
+func (b *Buffer) Reset() {
+	*b = (*b)[:0]
+}
+
+func (b *Buffer) Write(p []byte) (int, error) {
+	*b = append(*b, p...)
+	return len(p), nil
+}
+
+func (b *Buffer) WriteString(s string) {
+	*b = append(*b, s...)
+}
+
+func (b *Buffer) WriteByte(c byte) {
+	*b = append(*b, c)
+}
+
+func (b *Buffer) WritePosInt(i int) {
+	b.WritePosIntWidth(i, 0)
+}
+
+// WritePosIntWidth writes non-negative integer i to the buffer, padded on the left
+// by zeroes to the given width. Use a width of 0 to omit padding.
+func (b *Buffer) WritePosIntWidth(i, width int) {
+	// Cheap integer to fixed-width decimal ASCII.
+	// Copied from log/log.go.
+
+	if i < 0 {
+		panic("negative int")
+	}
+
+	// Assemble decimal in reverse order.
+	var bb [20]byte
+	bp := len(bb) - 1
+	for i >= 10 || width > 1 {
+		width--
+		q := i / 10
+		bb[bp] = byte('0' + i - q*10)
+		bp--
+		i = q
+	}
+	// i < 10
+	bb[bp] = byte('0' + i)
+	b.Write(bb[bp:])
+}
+
+func (b *Buffer) String() string {
+	return string(*b)
+}

vendor/golang.org/x/exp/slog/internal/ignorepc.go

@@ -0,0 +1,9 @@
+// Copyright 2023 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package internal
+
+// If IgnorePC is true, do not invoke runtime.Callers to get the pc.
+// This is solely for benchmarking the slowdown from runtime.Callers.
+var IgnorePC = false

vendor/golang.org/x/exp/slog/json_handler.go

@@ -0,0 +1,336 @@
+// Copyright 2022 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package slog
+
+import (
+	"bytes"
+	"context"
+	"encoding/json"
+	"errors"
+	"fmt"
+	"io"
+	"strconv"
+	"time"
+	"unicode/utf8"
+
+	"golang.org/x/exp/slog/internal/buffer"
+)
+
+// JSONHandler is a Handler that writes Records to an io.Writer as
+// line-delimited JSON objects.
+type JSONHandler struct {
+	*commonHandler
+}
+
+// NewJSONHandler creates a JSONHandler that writes to w,
+// using the given options.
+// If opts is nil, the default options are used.
+func NewJSONHandler(w io.Writer, opts *HandlerOptions) *JSONHandler {
+	if opts == nil {
+		opts = &HandlerOptions{}
+	}
+	return &JSONHandler{
+		&commonHandler{
+			json: true,
+			w:    w,
+			opts: *opts,
+		},
+	}
+}
+
+// Enabled reports whether the handler handles records at the given level.
+// The handler ignores records whose level is lower.
+func (h *JSONHandler) Enabled(_ context.Context, level Level) bool {
+	return h.commonHandler.enabled(level)
+}
+
+// WithAttrs returns a new JSONHandler whose attributes consists
+// of h's attributes followed by attrs.
+func (h *JSONHandler) WithAttrs(attrs []Attr) Handler {
+	return &JSONHandler{commonHandler: h.commonHandler.withAttrs(attrs)}
+}
+
+func (h *JSONHandler) WithGroup(name string) Handler {
+	return &JSONHandler{commonHandler: h.commonHandler.withGroup(name)}
+}
+
+// Handle formats its argument Record as a JSON object on a single line.
+//
+// If the Record's time is zero, the time is omitted.
+// Otherwise, the key is "time"
+// and the value is output as with json.Marshal.
+//
+// If the Record's level is zero, the level is omitted.
+// Otherwise, the key is "level"
+// and the value of [Level.String] is output.
+//
+// If the AddSource option is set and source information is available,
+// the key is "source"
+// and the value is output as "FILE:LINE".
+//
+// The message's key is "msg".
+//
+// To modify these or other attributes, or remove them from the output, use
+// [HandlerOptions.ReplaceAttr].
+//
+// Values are formatted as with an [encoding/json.Encoder] with SetEscapeHTML(false),
+// with two exceptions.
+//
+// First, an Attr whose Value is of type error is formatted as a string, by
+// calling its Error method. Only errors in Attrs receive this special treatment,
+// not errors embedded in structs, slices, maps or other data structures that
+// are processed by the encoding/json package.
+//
+// Second, an encoding failure does not cause Handle to return an error.
+// Instead, the error message is formatted as a string.
+//
+// Each call to Handle results in a single serialized call to io.Writer.Write.
+func (h *JSONHandler) Handle(_ context.Context, r Record) error {
+	return h.commonHandler.handle(r)
+}
+
+// Adapted from time.Time.MarshalJSON to avoid allocation.
+func appendJSONTime(s *handleState, t time.Time) {
+	if y := t.Year(); y < 0 || y >= 10000 {
+		// RFC 3339 is clear that years are 4 digits exactly.
+		// See golang.org/issue/4556#c15 for more discussion.
+		s.appendError(errors.New("time.Time year outside of range [0,9999]"))
+	}
+	s.buf.WriteByte('"')
+	*s.buf = t.AppendFormat(*s.buf, time.RFC3339Nano)
+	s.buf.WriteByte('"')
+}
+
+func appendJSONValue(s *handleState, v Value) error {
+	switch v.Kind() {
+	case KindString:
+		s.appendString(v.str())
+	case KindInt64:
+		*s.buf = strconv.AppendInt(*s.buf, v.Int64(), 10)
+	case KindUint64:
+		*s.buf = strconv.AppendUint(*s.buf, v.Uint64(), 10)
+	case KindFloat64:
+		// json.Marshal is funny about floats; it doesn't
+		// always match strconv.AppendFloat. So just call it.
+		// That's expensive, but floats are rare.
+		if err := appendJSONMarshal(s.buf, v.Float64()); err != nil {
+			return err
+		}
+	case KindBool:
+		*s.buf = strconv.AppendBool(*s.buf, v.Bool())
+	case KindDuration:
+		// Do what json.Marshal does.
+		*s.buf = strconv.AppendInt(*s.buf, int64(v.Duration()), 10)
+	case KindTime:
+		s.appendTime(v.Time())
+	case KindAny:
+		a := v.Any()
+		_, jm := a.(json.Marshaler)
+		if err, ok := a.(error); ok && !jm {
+			s.appendString(err.Error())
+		} else {
+			return appendJSONMarshal(s.buf, a)
+		}
+	default:
+		panic(fmt.Sprintf("bad kind: %s", v.Kind()))
+	}
+	return nil
+}
+
+func appendJSONMarshal(buf *buffer.Buffer, v any) error {
+	// Use a json.Encoder to avoid escaping HTML.
+	var bb bytes.Buffer
+	enc := json.NewEncoder(&bb)
+	enc.SetEscapeHTML(false)
+	if err := enc.Encode(v); err != nil {
+		return err
+	}
+	bs := bb.Bytes()
+	buf.Write(bs[:len(bs)-1]) // remove final newline
+	return nil
+}
+
+// appendEscapedJSONString escapes s for JSON and appends it to buf.
+// It does not surround the string in quotation marks.
+//
+// Modified from encoding/json/encode.go:encodeState.string,
+// with escapeHTML set to false.
+func appendEscapedJSONString(buf []byte, s string) []byte {
+	char := func(b byte) { buf = append(buf, b) }
+	str := func(s string) { buf = append(buf, s...) }
+
+	start := 0
+	for i := 0; i < len(s); {
+		if b := s[i]; b < utf8.RuneSelf {
+			if safeSet[b] {
+				i++
+				continue
+			}
+			if start < i {
+				str(s[start:i])
+			}
+			char('\\')
+			switch b {
+			case '\\', '"':
+				char(b)
+			case '\n':
+				char('n')
+			case '\r':
+				char('r')
+			case '\t':
+				char('t')
+			default:
+				// This encodes bytes < 0x20 except for \t, \n and \r.
+				str(`u00`)
+				char(hex[b>>4])
+				char(hex[b&0xF])
+			}
+			i++
+			start = i
+			continue
+		}
+		c, size := utf8.DecodeRuneInString(s[i:])
+		if c == utf8.RuneError && size == 1 {
+			if start < i {
+				str(s[start:i])
+			}
+			str(`\ufffd`)
+			i += size
+			start = i
+			continue
+		}
+		// U+2028 is LINE SEPARATOR.
+		// U+2029 is PARAGRAPH SEPARATOR.
+		// They are both technically valid characters in JSON strings,
+		// but don't work in JSONP, which has to be evaluated as JavaScript,
+		// and can lead to security holes there. It is valid JSON to
+		// escape them, so we do so unconditionally.
+		// See http://timelessrepo.com/json-isnt-a-javascript-subset for discussion.
+		if c == '\u2028' || c == '\u2029' {
+			if start < i {
+				str(s[start:i])
+			}
+			str(`\u202`)
+			char(hex[c&0xF])
+			i += size
+			start = i
+			continue
+		}
+		i += size
+	}
+	if start < len(s) {
+		str(s[start:])
+	}
+	return buf
+}
+
+var hex = "0123456789abcdef"
+
+// Copied from encoding/json/tables.go.
+//
+// safeSet holds the value true if the ASCII character with the given array
+// position can be represented inside a JSON string without any further
+// escaping.
+//
+// All values are true except for the ASCII control characters (0-31), the
+// double quote ("), and the backslash character ("\").
+var safeSet = [utf8.RuneSelf]bool{
+	' ':      true,
+	'!':      true,
+	'"':      false,
+	'#':      true,
+	'$':      true,
+	'%':      true,
+	'&':      true,
+	'\'':     true,
+	'(':      true,
+	')':      true,
+	'*':      true,
+	'+':      true,
+	',':      true,
+	'-':      true,
+	'.':      true,
+	'/':      true,
+	'0':      true,
+	'1':      true,
+	'2':      true,
+	'3':      true,
+	'4':      true,
+	'5':      true,
+	'6':      true,
+	'7':      true,
+	'8':      true,
+	'9':      true,
+	':':      true,
+	';':      true,
+	'<':      true,
+	'=':      true,
+	'>':      true,
+	'?':      true,
+	'@':      true,
+	'A':      true,
+	'B':      true,
+	'C':      true,
+	'D':      true,
+	'E':      true,
+	'F':      true,
+	'G':      true,
+	'H':      true,
+	'I':      true,
+	'J':      true,
+	'K':      true,
+	'L':      true,
+	'M':      true,
+	'N':      true,
+	'O':      true,
+	'P':      true,
+	'Q':      true,
+	'R':      true,
+	'S':      true,
+	'T':      true,
+	'U':      true,
+	'V':      true,
+	'W':      true,
+	'X':      true,
+	'Y':      true,
+	'Z':      true,
+	'[':      true,
+	'\\':     false,
+	']':      true,
+	'^':      true,
+	'_':      true,
+	'`':      true,
+	'a':      true,
+	'b':      true,
+	'c':      true,
+	'd':      true,
+	'e':      true,
+	'f':      true,
+	'g':      true,
+	'h':      true,
+	'i':      true,
+	'j':      true,
+	'k':      true,
+	'l':      true,
+	'm':      true,
+	'n':      true,
+	'o':      true,
+	'p':      true,
+	'q':      true,
+	'r':      true,
+	's':      true,
+	't':      true,
+	'u':      true,
+	'v':      true,
+	'w':      true,
+	'x':      true,
+	'y':      true,
+	'z':      true,
+	'{':      true,
+	'|':      true,
+	'}':      true,
+	'~':      true,
+	'\u007f': true,
+}

vendor/golang.org/x/exp/slog/level.go

@@ -0,0 +1,201 @@
+// Copyright 2022 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package slog
+
+import (
+	"errors"
+	"fmt"
+	"strconv"
+	"strings"
+	"sync/atomic"
+)
+
+// A Level is the importance or severity of a log event.
+// The higher the level, the more important or severe the event.
+type Level int
+
+// Level numbers are inherently arbitrary,
+// but we picked them to satisfy three constraints.
+// Any system can map them to another numbering scheme if it wishes.
+//
+// First, we wanted the default level to be Info, Since Levels are ints, Info is
+// the default value for int, zero.
+//
+
+// Second, we wanted to make it easy to use levels to specify logger verbosity.
+// Since a larger level means a more severe event, a logger that accepts events
+// with smaller (or more negative) level means a more verbose logger. Logger
+// verbosity is thus the negation of event severity, and the default verbosity
+// of 0 accepts all events at least as severe as INFO.
+//
+// Third, we wanted some room between levels to accommodate schemes with named
+// levels between ours. For example, Google Cloud Logging defines a Notice level
+// between Info and Warn. Since there are only a few of these intermediate
+// levels, the gap between the numbers need not be large. Our gap of 4 matches
+// OpenTelemetry's mapping. Subtracting 9 from an OpenTelemetry level in the
+// DEBUG, INFO, WARN and ERROR ranges converts it to the corresponding slog
+// Level range. OpenTelemetry also has the names TRACE and FATAL, which slog
+// does not. But those OpenTelemetry levels can still be represented as slog
+// Levels by using the appropriate integers.
+//
+// Names for common levels.
+const (
+	LevelDebug Level = -4
+	LevelInfo  Level = 0
+	LevelWarn  Level = 4
+	LevelError Level = 8
+)
+
+// String returns a name for the level.
+// If the level has a name, then that name
+// in uppercase is returned.
+// If the level is between named values, then
+// an integer is appended to the uppercased name.
+// Examples:
+//
+//	LevelWarn.String() => "WARN"
+//	(LevelInfo+2).String() => "INFO+2"
+func (l Level) String() string {
+	str := func(base string, val Level) string {
+		if val == 0 {
+			return base
+		}
+		return fmt.Sprintf("%s%+d", base, val)
+	}
+
+	switch {
+	case l < LevelInfo:
+		return str("DEBUG", l-LevelDebug)
+	case l < LevelWarn:
+		return str("INFO", l-LevelInfo)
+	case l < LevelError:
+		return str("WARN", l-LevelWarn)
+	default:
+		return str("ERROR", l-LevelError)
+	}
+}
+
+// MarshalJSON implements [encoding/json.Marshaler]
+// by quoting the output of [Level.String].
+func (l Level) MarshalJSON() ([]byte, error) {
+	// AppendQuote is sufficient for JSON-encoding all Level strings.
+	// They don't contain any runes that would produce invalid JSON
+	// when escaped.
+	return strconv.AppendQuote(nil, l.String()), nil
+}
+
+// UnmarshalJSON implements [encoding/json.Unmarshaler]
+// It accepts any string produced by [Level.MarshalJSON],
+// ignoring case.
+// It also accepts numeric offsets that would result in a different string on
+// output. For example, "Error-8" would marshal as "INFO".
+func (l *Level) UnmarshalJSON(data []byte) error {
+	s, err := strconv.Unquote(string(data))
+	if err != nil {
+		return err
+	}
+	return l.parse(s)
+}
+
+// MarshalText implements [encoding.TextMarshaler]
+// by calling [Level.String].
+func (l Level) MarshalText() ([]byte, error) {
+	return []byte(l.String()), nil
+}
+
+// UnmarshalText implements [encoding.TextUnmarshaler].
+// It accepts any string produced by [Level.MarshalText],
+// ignoring case.
+// It also accepts numeric offsets that would result in a different string on
+// output. For example, "Error-8" would marshal as "INFO".
+func (l *Level) UnmarshalText(data []byte) error {
+	return l.parse(string(data))
+}
+
+func (l *Level) parse(s string) (err error) {
+	defer func() {
+		if err != nil {
+			err = fmt.Errorf("slog: level string %q: %w", s, err)
+		}
+	}()
+
+	name := s
+	offset := 0
+	if i := strings.IndexAny(s, "+-"); i >= 0 {
+		name = s[:i]
+		offset, err = strconv.Atoi(s[i:])
+		if err != nil {
+			return err
+		}
+	}
+	switch strings.ToUpper(name) {
+	case "DEBUG":
+		*l = LevelDebug
+	case "INFO":
+		*l = LevelInfo
+	case "WARN":
+		*l = LevelWarn
+	case "ERROR":
+		*l = LevelError
+	default:
+		return errors.New("unknown name")
+	}
+	*l += Level(offset)
+	return nil
+}
+
+// Level returns the receiver.
+// It implements Leveler.
+func (l Level) Level() Level { return l }
+
+// A LevelVar is a Level variable, to allow a Handler level to change
+// dynamically.
+// It implements Leveler as well as a Set method,
+// and it is safe for use by multiple goroutines.
+// The zero LevelVar corresponds to LevelInfo.
+type LevelVar struct {
+	val atomic.Int64
+}
+
+// Level returns v's level.
+func (v *LevelVar) Level() Level {
+	return Level(int(v.val.Load()))
+}
+
+// Set sets v's level to l.
+func (v *LevelVar) Set(l Level) {
+	v.val.Store(int64(l))
+}
+
+func (v *LevelVar) String() string {
+	return fmt.Sprintf("LevelVar(%s)", v.Level())
+}
+
+// MarshalText implements [encoding.TextMarshaler]
+// by calling [Level.MarshalText].
+func (v *LevelVar) MarshalText() ([]byte, error) {
+	return v.Level().MarshalText()
+}
+
+// UnmarshalText implements [encoding.TextUnmarshaler]
+// by calling [Level.UnmarshalText].
+func (v *LevelVar) UnmarshalText(data []byte) error {
+	var l Level
+	if err := l.UnmarshalText(data); err != nil {
+		return err
+	}
+	v.Set(l)
+	return nil
+}
+
+// A Leveler provides a Level value.
+//
+// As Level itself implements Leveler, clients typically supply
+// a Level value wherever a Leveler is needed, such as in HandlerOptions.
+// Clients who need to vary the level dynamically can provide a more complex
+// Leveler implementation such as *LevelVar.
+type Leveler interface {
+	Level() Level
+}

vendor/golang.org/x/exp/slog/logger.go

@@ -0,0 +1,343 @@
+// Copyright 2022 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package slog
+
+import (
+	"context"
+	"log"
+	"runtime"
+	"sync/atomic"
+	"time"
+
+	"golang.org/x/exp/slog/internal"
+)
+
+var defaultLogger atomic.Value
+
+func init() {
+	defaultLogger.Store(New(newDefaultHandler(log.Output)))
+}
+
+// Default returns the default Logger.
+func Default() *Logger { return defaultLogger.Load().(*Logger) }
+
+// SetDefault makes l the default Logger.
+// After this call, output from the log package's default Logger
+// (as with [log.Print], etc.) will be logged at LevelInfo using l's Handler.
+func SetDefault(l *Logger) {
+	defaultLogger.Store(l)
+	// If the default's handler is a defaultHandler, then don't use a handleWriter,
+	// or we'll deadlock as they both try to acquire the log default mutex.
+	// The defaultHandler will use whatever the log default writer is currently
+	// set to, which is correct.
+	// This can occur with SetDefault(Default()).
+	// See TestSetDefault.
+	if _, ok := l.Handler().(*defaultHandler); !ok {
+		capturePC := log.Flags()&(log.Lshortfile|log.Llongfile) != 0
+		log.SetOutput(&handlerWriter{l.Handler(), LevelInfo, capturePC})
+		log.SetFlags(0) // we want just the log message, no time or location
+	}
+}
+
+// handlerWriter is an io.Writer that calls a Handler.
+// It is used to link the default log.Logger to the default slog.Logger.
+type handlerWriter struct {
+	h         Handler
+	level     Level
+	capturePC bool
+}
+
+func (w *handlerWriter) Write(buf []byte) (int, error) {
+	if !w.h.Enabled(context.Background(), w.level) {
+		return 0, nil
+	}
+	var pc uintptr
+	if !internal.IgnorePC && w.capturePC {
+		// skip [runtime.Callers, w.Write, Logger.Output, log.Print]
+		var pcs [1]uintptr
+		runtime.Callers(4, pcs[:])
+		pc = pcs[0]
+	}
+
+	// Remove final newline.
+	origLen := len(buf) // Report that the entire buf was written.
+	if len(buf) > 0 && buf[len(buf)-1] == '\n' {
+		buf = buf[:len(buf)-1]
+	}
+	r := NewRecord(time.Now(), w.level, string(buf), pc)
+	return origLen, w.h.Handle(context.Background(), r)
+}
+
+// A Logger records structured information about each call to its
+// Log, Debug, Info, Warn, and Error methods.
+// For each call, it creates a Record and passes it to a Handler.
+//
+// To create a new Logger, call [New] or a Logger method
+// that begins "With".
+type Logger struct {
+	handler Handler // for structured logging
+}
+
+func (l *Logger) clone() *Logger {
+	c := *l
+	return &c
+}
+
+// Handler returns l's Handler.
+func (l *Logger) Handler() Handler { return l.handler }
+
+// With returns a new Logger that includes the given arguments, converted to
+// Attrs as in [Logger.Log].
+// The Attrs will be added to each output from the Logger.
+// The new Logger shares the old Logger's context.
+// The new Logger's handler is the result of calling WithAttrs on the receiver's
+// handler.
+func (l *Logger) With(args ...any) *Logger {
+	c := l.clone()
+	c.handler = l.handler.WithAttrs(argsToAttrSlice(args))
+	return c
+}
+
+// WithGroup returns a new Logger that starts a group. The keys of all
+// attributes added to the Logger will be qualified by the given name.
+// (How that qualification happens depends on the [Handler.WithGroup]
+// method of the Logger's Handler.)
+// The new Logger shares the old Logger's context.
+//
+// The new Logger's handler is the result of calling WithGroup on the receiver's
+// handler.
+func (l *Logger) WithGroup(name string) *Logger {
+	c := l.clone()
+	c.handler = l.handler.WithGroup(name)
+	return c
+
+}
+
+// New creates a new Logger with the given non-nil Handler and a nil context.
+func New(h Handler) *Logger {
+	if h == nil {
+		panic("nil Handler")
+	}
+	return &Logger{handler: h}
+}
+
+// With calls Logger.With on the default logger.
+func With(args ...any) *Logger {
+	return Default().With(args...)
+}
+
+// Enabled reports whether l emits log records at the given context and level.
+func (l *Logger) Enabled(ctx context.Context, level Level) bool {
+	if ctx == nil {
+		ctx = context.Background()
+	}
+	return l.Handler().Enabled(ctx, level)
+}
+
+// NewLogLogger returns a new log.Logger such that each call to its Output method
+// dispatches a Record to the specified handler. The logger acts as a bridge from
+// the older log API to newer structured logging handlers.
+func NewLogLogger(h Handler, level Level) *log.Logger {
+	return log.New(&handlerWriter{h, level, true}, "", 0)
+}
+
+// Log emits a log record with the current time and the given level and message.
+// The Record's Attrs consist of the Logger's attributes followed by
+// the Attrs specified by args.
+//
+// The attribute arguments are processed as follows:
+//   - If an argument is an Attr, it is used as is.
+//   - If an argument is a string and this is not the last argument,
+//     the following argument is treated as the value and the two are combined
+//     into an Attr.
+//   - Otherwise, the argument is treated as a value with key "!BADKEY".
+func (l *Logger) Log(ctx context.Context, level Level, msg string, args ...any) {
+	l.log(ctx, level, msg, args...)
+}
+
+// LogAttrs is a more efficient version of [Logger.Log] that accepts only Attrs.
+func (l *Logger) LogAttrs(ctx context.Context, level Level, msg string, attrs ...Attr) {
+	l.logAttrs(ctx, level, msg, attrs...)
+}
+
+// Debug logs at LevelDebug.
+func (l *Logger) Debug(msg string, args ...any) {
+	l.log(nil, LevelDebug, msg, args...)
+}
+
+// DebugContext logs at LevelDebug with the given context.
+func (l *Logger) DebugContext(ctx context.Context, msg string, args ...any) {
+	l.log(ctx, LevelDebug, msg, args...)
+}
+
+// DebugCtx logs at LevelDebug with the given context.
+// Deprecated: Use Logger.DebugContext.
+func (l *Logger) DebugCtx(ctx context.Context, msg string, args ...any) {
+	l.log(ctx, LevelDebug, msg, args...)
+}
+
+// Info logs at LevelInfo.
+func (l *Logger) Info(msg string, args ...any) {
+	l.log(nil, LevelInfo, msg, args...)
+}
+
+// InfoContext logs at LevelInfo with the given context.
+func (l *Logger) InfoContext(ctx context.Context, msg string, args ...any) {
+	l.log(ctx, LevelInfo, msg, args...)
+}
+
+// InfoCtx logs at LevelInfo with the given context.
+// Deprecated: Use Logger.InfoContext.
+func (l *Logger) InfoCtx(ctx context.Context, msg string, args ...any) {
+	l.log(ctx, LevelInfo, msg, args...)
+}
+
+// Warn logs at LevelWarn.
+func (l *Logger) Warn(msg string, args ...any) {
+	l.log(nil, LevelWarn, msg, args...)
+}
+
+// WarnContext logs at LevelWarn with the given context.
+func (l *Logger) WarnContext(ctx context.Context, msg string, args ...any) {
+	l.log(ctx, LevelWarn, msg, args...)
+}
+
+// WarnCtx logs at LevelWarn with the given context.
+// Deprecated: Use Logger.WarnContext.
+func (l *Logger) WarnCtx(ctx context.Context, msg string, args ...any) {
+	l.log(ctx, LevelWarn, msg, args...)
+}
+
+// Error logs at LevelError.
+func (l *Logger) Error(msg string, args ...any) {
+	l.log(nil, LevelError, msg, args...)
+}
+
+// ErrorContext logs at LevelError with the given context.
+func (l *Logger) ErrorContext(ctx context.Context, msg string, args ...any) {
+	l.log(ctx, LevelError, msg, args...)
+}
+
+// ErrorCtx logs at LevelError with the given context.
+// Deprecated: Use Logger.ErrorContext.
+func (l *Logger) ErrorCtx(ctx context.Context, msg string, args ...any) {
+	l.log(ctx, LevelError, msg, args...)
+}
+
+// log is the low-level logging method for methods that take ...any.
+// It must always be called directly by an exported logging method
+// or function, because it uses a fixed call depth to obtain the pc.
+func (l *Logger) log(ctx context.Context, level Level, msg string, args ...any) {
+	if !l.Enabled(ctx, level) {
+		return
+	}
+	var pc uintptr
+	if !internal.IgnorePC {
+		var pcs [1]uintptr
+		// skip [runtime.Callers, this function, this function's caller]
+		runtime.Callers(3, pcs[:])
+		pc = pcs[0]
+	}
+	r := NewRecord(time.Now(), level, msg, pc)
+	r.Add(args...)
+	if ctx == nil {
+		ctx = context.Background()
+	}
+	_ = l.Handler().Handle(ctx, r)
+}
+
+// logAttrs is like [Logger.log], but for methods that take ...Attr.
+func (l *Logger) logAttrs(ctx context.Context, level Level, msg string, attrs ...Attr) {
+	if !l.Enabled(ctx, level) {
+		return
+	}
+	var pc uintptr
+	if !internal.IgnorePC {
+		var pcs [1]uintptr
+		// skip [runtime.Callers, this function, this function's caller]
+		runtime.Callers(3, pcs[:])
+		pc = pcs[0]
+	}
+	r := NewRecord(time.Now(), level, msg, pc)
+	r.AddAttrs(attrs...)
+	if ctx == nil {
+		ctx = context.Background()
+	}
+	_ = l.Handler().Handle(ctx, r)
+}
+
+// Debug calls Logger.Debug on the default logger.
+func Debug(msg string, args ...any) {
+	Default().log(nil, LevelDebug, msg, args...)
+}
+
+// DebugContext calls Logger.DebugContext on the default logger.
+func DebugContext(ctx context.Context, msg string, args ...any) {
+	Default().log(ctx, LevelDebug, msg, args...)
+}
+
+// Info calls Logger.Info on the default logger.
+func Info(msg string, args ...any) {
+	Default().log(nil, LevelInfo, msg, args...)
+}
+
+// InfoContext calls Logger.InfoContext on the default logger.
+func InfoContext(ctx context.Context, msg string, args ...any) {
+	Default().log(ctx, LevelInfo, msg, args...)
+}
+
+// Warn calls Logger.Warn on the default logger.
+func Warn(msg string, args ...any) {
+	Default().log(nil, LevelWarn, msg, args...)
+}
+
+// WarnContext calls Logger.WarnContext on the default logger.
+func WarnContext(ctx context.Context, msg string, args ...any) {
+	Default().log(ctx, LevelWarn, msg, args...)
+}
+
+// Error calls Logger.Error on the default logger.
+func Error(msg string, args ...any) {
+	Default().log(nil, LevelError, msg, args...)
+}
+
+// ErrorContext calls Logger.ErrorContext on the default logger.
+func ErrorContext(ctx context.Context, msg string, args ...any) {
+	Default().log(ctx, LevelError, msg, args...)
+}
+
+// DebugCtx calls Logger.DebugContext on the default logger.
+// Deprecated: call DebugContext.
+func DebugCtx(ctx context.Context, msg string, args ...any) {
+	Default().log(ctx, LevelDebug, msg, args...)
+}
+
+// InfoCtx calls Logger.InfoContext on the default logger.
+// Deprecated: call InfoContext.
+func InfoCtx(ctx context.Context, msg string, args ...any) {
+	Default().log(ctx, LevelInfo, msg, args...)
+}
+
+// WarnCtx calls Logger.WarnContext on the default logger.
+// Deprecated: call WarnContext.
+func WarnCtx(ctx context.Context, msg string, args ...any) {
+	Default().log(ctx, LevelWarn, msg, args...)
+}
+
+// ErrorCtx calls Logger.ErrorContext on the default logger.
+// Deprecated: call ErrorContext.
+func ErrorCtx(ctx context.Context, msg string, args ...any) {
+	Default().log(ctx, LevelError, msg, args...)
+}
+
+// Log calls Logger.Log on the default logger.
+func Log(ctx context.Context, level Level, msg string, args ...any) {
+	Default().log(ctx, level, msg, args...)
+}
+
+// LogAttrs calls Logger.LogAttrs on the default logger.
+func LogAttrs(ctx context.Context, level Level, msg string, attrs ...Attr) {
+	Default().logAttrs(ctx, level, msg, attrs...)
+}

vendor/golang.org/x/exp/slog/noplog.bench

@@ -0,0 +1,36 @@
+goos: linux
+goarch: amd64
+pkg: golang.org/x/exp/slog
+cpu: Intel(R) Xeon(R) CPU @ 2.20GHz
+BenchmarkNopLog/attrs-8         	 1000000	      1090 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/attrs-8         	 1000000	      1097 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/attrs-8         	 1000000	      1078 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/attrs-8         	 1000000	      1095 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/attrs-8         	 1000000	      1096 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/attrs-parallel-8         	 4007268	       308.2 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/attrs-parallel-8         	 4016138	       299.7 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/attrs-parallel-8         	 4020529	       305.9 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/attrs-parallel-8         	 3977829	       303.4 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/attrs-parallel-8         	 3225438	       318.5 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/keys-values-8            	 1179256	       994.2 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/keys-values-8            	 1000000	      1002 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/keys-values-8            	 1216710	       993.2 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/keys-values-8            	 1000000	      1013 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/keys-values-8            	 1000000	      1016 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/WithContext-8            	  989066	      1163 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/WithContext-8            	  994116	      1163 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/WithContext-8            	 1000000	      1152 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/WithContext-8            	  991675	      1165 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/WithContext-8            	  965268	      1166 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/WithContext-parallel-8   	 3955503	       303.3 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/WithContext-parallel-8   	 3861188	       307.8 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/WithContext-parallel-8   	 3967752	       303.9 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/WithContext-parallel-8   	 3955203	       302.7 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/WithContext-parallel-8   	 3948278	       301.1 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/Ctx-8                    	  940622	      1247 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/Ctx-8                    	  936381	      1257 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/Ctx-8                    	  959730	      1266 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/Ctx-8                    	  943473	      1290 ns/op	       0 B/op	       0 allocs/op
+BenchmarkNopLog/Ctx-8                    	  919414	      1259 ns/op	       0 B/op	       0 allocs/op
+PASS
+ok  	golang.org/x/exp/slog	40.566s

vendor/golang.org/x/exp/slog/record.go

@@ -0,0 +1,207 @@
+// Copyright 2022 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package slog
+
+import (
+	"runtime"
+	"time"
+
+	"golang.org/x/exp/slices"
+)
+
+const nAttrsInline = 5
+
+// A Record holds information about a log event.
+// Copies of a Record share state.
+// Do not modify a Record after handing out a copy to it.
+// Use [Record.Clone] to create a copy with no shared state.
+type Record struct {
+	// The time at which the output method (Log, Info, etc.) was called.
+	Time time.Time
+
+	// The log message.
+	Message string
+
+	// The level of the event.
+	Level Level
+
+	// The program counter at the time the record was constructed, as determined
+	// by runtime.Callers. If zero, no program counter is available.
+	//
+	// The only valid use for this value is as an argument to
+	// [runtime.CallersFrames]. In particular, it must not be passed to
+	// [runtime.FuncForPC].
+	PC uintptr
+
+	// Allocation optimization: an inline array sized to hold
+	// the majority of log calls (based on examination of open-source
+	// code). It holds the start of the list of Attrs.
+	front [nAttrsInline]Attr
+
+	// The number of Attrs in front.
+	nFront int
+
+	// The list of Attrs except for those in front.
+	// Invariants:
+	//   - len(back) > 0 iff nFront == len(front)
+	//   - Unused array elements are zero. Used to detect mistakes.
+	back []Attr
+}
+
+// NewRecord creates a Record from the given arguments.
+// Use [Record.AddAttrs] to add attributes to the Record.
+//
+// NewRecord is intended for logging APIs that want to support a [Handler] as
+// a backend.
+func NewRecord(t time.Time, level Level, msg string, pc uintptr) Record {
+	return Record{
+		Time:    t,
+		Message: msg,
+		Level:   level,
+		PC:      pc,
+	}
+}
+
+// Clone returns a copy of the record with no shared state.
+// The original record and the clone can both be modified
+// without interfering with each other.
+func (r Record) Clone() Record {
+	r.back = slices.Clip(r.back) // prevent append from mutating shared array
+	return r
+}
+
+// NumAttrs returns the number of attributes in the Record.
+func (r Record) NumAttrs() int {
+	return r.nFront + len(r.back)
+}
+
+// Attrs calls f on each Attr in the Record.
+// Iteration stops if f returns false.
+func (r Record) Attrs(f func(Attr) bool) {
+	for i := 0; i < r.nFront; i++ {
+		if !f(r.front[i]) {
+			return
+		}
+	}
+	for _, a := range r.back {
+		if !f(a) {
+			return
+		}
+	}
+}
+
+// AddAttrs appends the given Attrs to the Record's list of Attrs.
+func (r *Record) AddAttrs(attrs ...Attr) {
+	n := copy(r.front[r.nFront:], attrs)
+	r.nFront += n
+	// Check if a copy was modified by slicing past the end
+	// and seeing if the Attr there is non-zero.
+	if cap(r.back) > len(r.back) {
+		end := r.back[:len(r.back)+1][len(r.back)]
+		if !end.isEmpty() {
+			panic("copies of a slog.Record were both modified")
+		}
+	}
+	r.back = append(r.back, attrs[n:]...)
+}
+
+// Add converts the args to Attrs as described in [Logger.Log],
+// then appends the Attrs to the Record's list of Attrs.
+func (r *Record) Add(args ...any) {
+	var a Attr
+	for len(args) > 0 {
+		a, args = argsToAttr(args)
+		if r.nFront < len(r.front) {
+			r.front[r.nFront] = a
+			r.nFront++
+		} else {
+			if r.back == nil {
+				r.back = make([]Attr, 0, countAttrs(args))
+			}
+			r.back = append(r.back, a)
+		}
+	}
+
+}
+
+// countAttrs returns the number of Attrs that would be created from args.
+func countAttrs(args []any) int {
+	n := 0
+	for i := 0; i < len(args); i++ {
+		n++
+		if _, ok := args[i].(string); ok {
+			i++
+		}
+	}
+	return n
+}
+
+const badKey = "!BADKEY"
+
+// argsToAttr turns a prefix of the nonempty args slice into an Attr
+// and returns the unconsumed portion of the slice.
+// If args[0] is an Attr, it returns it.
+// If args[0] is a string, it treats the first two elements as
+// a key-value pair.
+// Otherwise, it treats args[0] as a value with a missing key.
+func argsToAttr(args []any) (Attr, []any) {
+	switch x := args[0].(type) {
+	case string:
+		if len(args) == 1 {
+			return String(badKey, x), nil
+		}
+		return Any(x, args[1]), args[2:]
+
+	case Attr:
+		return x, args[1:]
+
+	default:
+		return Any(badKey, x), args[1:]
+	}
+}
+
+// Source describes the location of a line of source code.
+type Source struct {
+	// Function is the package path-qualified function name containing the
+	// source line. If non-empty, this string uniquely identifies a single
+	// function in the program. This may be the empty string if not known.
+	Function string `json:"function"`
+	// File and Line are the file name and line number (1-based) of the source
+	// line. These may be the empty string and zero, respectively, if not known.
+	File string `json:"file"`
+	Line int    `json:"line"`
+}
+
+// attrs returns the non-zero fields of s as a slice of attrs.
+// It is similar to a LogValue method, but we don't want Source
+// to implement LogValuer because it would be resolved before
+// the ReplaceAttr function was called.
+func (s *Source) group() Value {
+	var as []Attr
+	if s.Function != "" {
+		as = append(as, String("function", s.Function))
+	}
+	if s.File != "" {
+		as = append(as, String("file", s.File))
+	}
+	if s.Line != 0 {
+		as = append(as, Int("line", s.Line))
+	}
+	return GroupValue(as...)
+}
+
+// source returns a Source for the log event.
+// If the Record was created without the necessary information,
+// or if the location is unavailable, it returns a non-nil *Source
+// with zero fields.
+func (r Record) source() *Source {
+	fs := runtime.CallersFrames([]uintptr{r.PC})
+	f, _ := fs.Next()
+	return &Source{
+		Function: f.Function,
+		File:     f.File,
+		Line:     f.Line,
+	}
+}

vendor/golang.org/x/exp/slog/text_handler.go

@@ -0,0 +1,161 @@
+// Copyright 2022 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package slog
+
+import (
+	"context"
+	"encoding"
+	"fmt"
+	"io"
+	"reflect"
+	"strconv"
+	"unicode"
+	"unicode/utf8"
+)
+
+// TextHandler is a Handler that writes Records to an io.Writer as a
+// sequence of key=value pairs separated by spaces and followed by a newline.
+type TextHandler struct {
+	*commonHandler
+}
+
+// NewTextHandler creates a TextHandler that writes to w,
+// using the given options.
+// If opts is nil, the default options are used.
+func NewTextHandler(w io.Writer, opts *HandlerOptions) *TextHandler {
+	if opts == nil {
+		opts = &HandlerOptions{}
+	}
+	return &TextHandler{
+		&commonHandler{
+			json: false,
+			w:    w,
+			opts: *opts,
+		},
+	}
+}
+
+// Enabled reports whether the handler handles records at the given level.
+// The handler ignores records whose level is lower.
+func (h *TextHandler) Enabled(_ context.Context, level Level) bool {
+	return h.commonHandler.enabled(level)
+}
+
+// WithAttrs returns a new TextHandler whose attributes consists
+// of h's attributes followed by attrs.
+func (h *TextHandler) WithAttrs(attrs []Attr) Handler {
+	return &TextHandler{commonHandler: h.commonHandler.withAttrs(attrs)}
+}
+
+func (h *TextHandler) WithGroup(name string) Handler {
+	return &TextHandler{commonHandler: h.commonHandler.withGroup(name)}
+}
+
+// Handle formats its argument Record as a single line of space-separated
+// key=value items.
+//
+// If the Record's time is zero, the time is omitted.
+// Otherwise, the key is "time"
+// and the value is output in RFC3339 format with millisecond precision.
+//
+// If the Record's level is zero, the level is omitted.
+// Otherwise, the key is "level"
+// and the value of [Level.String] is output.
+//
+// If the AddSource option is set and source information is available,
+// the key is "source" and the value is output as FILE:LINE.
+//
+// The message's key is "msg".
+//
+// To modify these or other attributes, or remove them from the output, use
+// [HandlerOptions.ReplaceAttr].
+//
+// If a value implements [encoding.TextMarshaler], the result of MarshalText is
+// written. Otherwise, the result of fmt.Sprint is written.
+//
+// Keys and values are quoted with [strconv.Quote] if they contain Unicode space
+// characters, non-printing characters, '"' or '='.
+//
+// Keys inside groups consist of components (keys or group names) separated by
+// dots. No further escaping is performed.
+// Thus there is no way to determine from the key "a.b.c" whether there
+// are two groups "a" and "b" and a key "c", or a single group "a.b" and a key "c",
+// or single group "a" and a key "b.c".
+// If it is necessary to reconstruct the group structure of a key
+// even in the presence of dots inside components, use
+// [HandlerOptions.ReplaceAttr] to encode that information in the key.
+//
+// Each call to Handle results in a single serialized call to
+// io.Writer.Write.
+func (h *TextHandler) Handle(_ context.Context, r Record) error {
+	return h.commonHandler.handle(r)
+}
+
+func appendTextValue(s *handleState, v Value) error {
+	switch v.Kind() {
+	case KindString:
+		s.appendString(v.str())
+	case KindTime:
+		s.appendTime(v.time())
+	case KindAny:
+		if tm, ok := v.any.(encoding.TextMarshaler); ok {
+			data, err := tm.MarshalText()
+			if err != nil {
+				return err
+			}
+			// TODO: avoid the conversion to string.
+			s.appendString(string(data))
+			return nil
+		}
+		if bs, ok := byteSlice(v.any); ok {
+			// As of Go 1.19, this only allocates for strings longer than 32 bytes.
+			s.buf.WriteString(strconv.Quote(string(bs)))
+			return nil
+		}
+		s.appendString(fmt.Sprintf("%+v", v.Any()))
+	default:
+		*s.buf = v.append(*s.buf)
+	}
+	return nil
+}
+
+// byteSlice returns its argument as a []byte if the argument's
+// underlying type is []byte, along with a second return value of true.
+// Otherwise it returns nil, false.
+func byteSlice(a any) ([]byte, bool) {
+	if bs, ok := a.([]byte); ok {
+		return bs, true
+	}
+	// Like Printf's %s, we allow both the slice type and the byte element type to be named.
+	t := reflect.TypeOf(a)
+	if t != nil && t.Kind() == reflect.Slice && t.Elem().Kind() == reflect.Uint8 {
+		return reflect.ValueOf(a).Bytes(), true
+	}
+	return nil, false
+}
+
+func needsQuoting(s string) bool {
+	if len(s) == 0 {
+		return true
+	}
+	for i := 0; i < len(s); {
+		b := s[i]
+		if b < utf8.RuneSelf {
+			// Quote anything except a backslash that would need quoting in a
+			// JSON string, as well as space and '='
+			if b != '\\' && (b == ' ' || b == '=' || !safeSet[b]) {
+				return true
+			}
+			i++
+			continue
+		}
+		r, size := utf8.DecodeRuneInString(s[i:])
+		if r == utf8.RuneError || unicode.IsSpace(r) || !unicode.IsPrint(r) {
+			return true
+		}
+		i += size
+	}
+	return false
+}

vendor/golang.org/x/exp/slog/value.go

@@ -0,0 +1,456 @@
+// Copyright 2022 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package slog
+
+import (
+	"fmt"
+	"math"
+	"runtime"
+	"strconv"
+	"strings"
+	"time"
+	"unsafe"
+
+	"golang.org/x/exp/slices"
+)
+
+// A Value can represent any Go value, but unlike type any,
+// it can represent most small values without an allocation.
+// The zero Value corresponds to nil.
+type Value struct {
+	_ [0]func() // disallow ==
+	// num holds the value for Kinds Int64, Uint64, Float64, Bool and Duration,
+	// the string length for KindString, and nanoseconds since the epoch for KindTime.
+	num uint64
+	// If any is of type Kind, then the value is in num as described above.
+	// If any is of type *time.Location, then the Kind is Time and time.Time value
+	// can be constructed from the Unix nanos in num and the location (monotonic time
+	// is not preserved).
+	// If any is of type stringptr, then the Kind is String and the string value
+	// consists of the length in num and the pointer in any.
+	// Otherwise, the Kind is Any and any is the value.
+	// (This implies that Attrs cannot store values of type Kind, *time.Location
+	// or stringptr.)
+	any any
+}
+
+// Kind is the kind of a Value.
+type Kind int
+
+// The following list is sorted alphabetically, but it's also important that
+// KindAny is 0 so that a zero Value represents nil.
+
+const (
+	KindAny Kind = iota
+	KindBool
+	KindDuration
+	KindFloat64
+	KindInt64
+	KindString
+	KindTime
+	KindUint64
+	KindGroup
+	KindLogValuer
+)
+
+var kindStrings = []string{
+	"Any",
+	"Bool",
+	"Duration",
+	"Float64",
+	"Int64",
+	"String",
+	"Time",
+	"Uint64",
+	"Group",
+	"LogValuer",
+}
+
+func (k Kind) String() string {
+	if k >= 0 && int(k) < len(kindStrings) {
+		return kindStrings[k]
+	}
+	return "<unknown slog.Kind>"
+}
+
+// Unexported version of Kind, just so we can store Kinds in Values.
+// (No user-provided value has this type.)
+type kind Kind
+
+// Kind returns v's Kind.
+func (v Value) Kind() Kind {
+	switch x := v.any.(type) {
+	case Kind:
+		return x
+	case stringptr:
+		return KindString
+	case timeLocation:
+		return KindTime
+	case groupptr:
+		return KindGroup
+	case LogValuer:
+		return KindLogValuer
+	case kind: // a kind is just a wrapper for a Kind
+		return KindAny
+	default:
+		return KindAny
+	}
+}
+
+//////////////// Constructors
+
+// IntValue returns a Value for an int.
+func IntValue(v int) Value {
+	return Int64Value(int64(v))
+}
+
+// Int64Value returns a Value for an int64.
+func Int64Value(v int64) Value {
+	return Value{num: uint64(v), any: KindInt64}
+}
+
+// Uint64Value returns a Value for a uint64.
+func Uint64Value(v uint64) Value {
+	return Value{num: v, any: KindUint64}
+}
+
+// Float64Value returns a Value for a floating-point number.
+func Float64Value(v float64) Value {
+	return Value{num: math.Float64bits(v), any: KindFloat64}
+}
+
+// BoolValue returns a Value for a bool.
+func BoolValue(v bool) Value {
+	u := uint64(0)
+	if v {
+		u = 1
+	}
+	return Value{num: u, any: KindBool}
+}
+
+// Unexported version of *time.Location, just so we can store *time.Locations in
+// Values. (No user-provided value has this type.)
+type timeLocation *time.Location
+
+// TimeValue returns a Value for a time.Time.
+// It discards the monotonic portion.
+func TimeValue(v time.Time) Value {
+	if v.IsZero() {
+		// UnixNano on the zero time is undefined, so represent the zero time
+		// with a nil *time.Location instead. time.Time.Location method never
+		// returns nil, so a Value with any == timeLocation(nil) cannot be
+		// mistaken for any other Value, time.Time or otherwise.
+		return Value{any: timeLocation(nil)}
+	}
+	return Value{num: uint64(v.UnixNano()), any: timeLocation(v.Location())}
+}
+
+// DurationValue returns a Value for a time.Duration.
+func DurationValue(v time.Duration) Value {
+	return Value{num: uint64(v.Nanoseconds()), any: KindDuration}
+}
+
+// AnyValue returns a Value for the supplied value.
+//
+// If the supplied value is of type Value, it is returned
+// unmodified.
+//
+// Given a value of one of Go's predeclared string, bool, or
+// (non-complex) numeric types, AnyValue returns a Value of kind
+// String, Bool, Uint64, Int64, or Float64. The width of the
+// original numeric type is not preserved.
+//
+// Given a time.Time or time.Duration value, AnyValue returns a Value of kind
+// KindTime or KindDuration. The monotonic time is not preserved.
+//
+// For nil, or values of all other types, including named types whose
+// underlying type is numeric, AnyValue returns a value of kind KindAny.
+func AnyValue(v any) Value {
+	switch v := v.(type) {
+	case string:
+		return StringValue(v)
+	case int:
+		return Int64Value(int64(v))
+	case uint:
+		return Uint64Value(uint64(v))
+	case int64:
+		return Int64Value(v)
+	case uint64:
+		return Uint64Value(v)
+	case bool:
+		return BoolValue(v)
+	case time.Duration:
+		return DurationValue(v)
+	case time.Time:
+		return TimeValue(v)
+	case uint8:
+		return Uint64Value(uint64(v))
+	case uint16:
+		return Uint64Value(uint64(v))
+	case uint32:
+		return Uint64Value(uint64(v))
+	case uintptr:
+		return Uint64Value(uint64(v))
+	case int8:
+		return Int64Value(int64(v))
+	case int16:
+		return Int64Value(int64(v))
+	case int32:
+		return Int64Value(int64(v))
+	case float64:
+		return Float64Value(v)
+	case float32:
+		return Float64Value(float64(v))
+	case []Attr:
+		return GroupValue(v...)
+	case Kind:
+		return Value{any: kind(v)}
+	case Value:
+		return v
+	default:
+		return Value{any: v}
+	}
+}
+
+//////////////// Accessors
+
+// Any returns v's value as an any.
+func (v Value) Any() any {
+	switch v.Kind() {
+	case KindAny:
+		if k, ok := v.any.(kind); ok {
+			return Kind(k)
+		}
+		return v.any
+	case KindLogValuer:
+		return v.any
+	case KindGroup:
+		return v.group()
+	case KindInt64:
+		return int64(v.num)
+	case KindUint64:
+		return v.num
+	case KindFloat64:
+		return v.float()
+	case KindString:
+		return v.str()
+	case KindBool:
+		return v.bool()
+	case KindDuration:
+		return v.duration()
+	case KindTime:
+		return v.time()
+	default:
+		panic(fmt.Sprintf("bad kind: %s", v.Kind()))
+	}
+}
+
+// Int64 returns v's value as an int64. It panics
+// if v is not a signed integer.
+func (v Value) Int64() int64 {
+	if g, w := v.Kind(), KindInt64; g != w {
+		panic(fmt.Sprintf("Value kind is %s, not %s", g, w))
+	}
+	return int64(v.num)
+}
+
+// Uint64 returns v's value as a uint64. It panics
+// if v is not an unsigned integer.
+func (v Value) Uint64() uint64 {
+	if g, w := v.Kind(), KindUint64; g != w {
+		panic(fmt.Sprintf("Value kind is %s, not %s", g, w))
+	}
+	return v.num
+}
+
+// Bool returns v's value as a bool. It panics
+// if v is not a bool.
+func (v Value) Bool() bool {
+	if g, w := v.Kind(), KindBool; g != w {
+		panic(fmt.Sprintf("Value kind is %s, not %s", g, w))
+	}
+	return v.bool()
+}
+
+func (v Value) bool() bool {
+	return v.num == 1
+}
+
+// Duration returns v's value as a time.Duration. It panics
+// if v is not a time.Duration.
+func (v Value) Duration() time.Duration {
+	if g, w := v.Kind(), KindDuration; g != w {
+		panic(fmt.Sprintf("Value kind is %s, not %s", g, w))
+	}
+
+	return v.duration()
+}
+
+func (v Value) duration() time.Duration {
+	return time.Duration(int64(v.num))
+}
+
+// Float64 returns v's value as a float64. It panics
+// if v is not a float64.
+func (v Value) Float64() float64 {
+	if g, w := v.Kind(), KindFloat64; g != w {
+		panic(fmt.Sprintf("Value kind is %s, not %s", g, w))
+	}
+
+	return v.float()
+}
+
+func (v Value) float() float64 {
+	return math.Float64frombits(v.num)
+}
+
+// Time returns v's value as a time.Time. It panics
+// if v is not a time.Time.
+func (v Value) Time() time.Time {
+	if g, w := v.Kind(), KindTime; g != w {
+		panic(fmt.Sprintf("Value kind is %s, not %s", g, w))
+	}
+	return v.time()
+}
+
+func (v Value) time() time.Time {
+	loc := v.any.(timeLocation)
+	if loc == nil {
+		return time.Time{}
+	}
+	return time.Unix(0, int64(v.num)).In(loc)
+}
+
+// LogValuer returns v's value as a LogValuer. It panics
+// if v is not a LogValuer.
+func (v Value) LogValuer() LogValuer {
+	return v.any.(LogValuer)
+}
+
+// Group returns v's value as a []Attr.
+// It panics if v's Kind is not KindGroup.
+func (v Value) Group() []Attr {
+	if sp, ok := v.any.(groupptr); ok {
+		return unsafe.Slice((*Attr)(sp), v.num)
+	}
+	panic("Group: bad kind")
+}
+
+func (v Value) group() []Attr {
+	return unsafe.Slice((*Attr)(v.any.(groupptr)), v.num)
+}
+
+//////////////// Other
+
+// Equal reports whether v and w represent the same Go value.
+func (v Value) Equal(w Value) bool {
+	k1 := v.Kind()
+	k2 := w.Kind()
+	if k1 != k2 {
+		return false
+	}
+	switch k1 {
+	case KindInt64, KindUint64, KindBool, KindDuration:
+		return v.num == w.num
+	case KindString:
+		return v.str() == w.str()
+	case KindFloat64:
+		return v.float() == w.float()
+	case KindTime:
+		return v.time().Equal(w.time())
+	case KindAny, KindLogValuer:
+		return v.any == w.any // may panic if non-comparable
+	case KindGroup:
+		return slices.EqualFunc(v.group(), w.group(), Attr.Equal)
+	default:
+		panic(fmt.Sprintf("bad kind: %s", k1))
+	}
+}
+
+// append appends a text representation of v to dst.
+// v is formatted as with fmt.Sprint.
+func (v Value) append(dst []byte) []byte {
+	switch v.Kind() {
+	case KindString:
+		return append(dst, v.str()...)
+	case KindInt64:
+		return strconv.AppendInt(dst, int64(v.num), 10)
+	case KindUint64:
+		return strconv.AppendUint(dst, v.num, 10)
+	case KindFloat64:
+		return strconv.AppendFloat(dst, v.float(), 'g', -1, 64)
+	case KindBool:
+		return strconv.AppendBool(dst, v.bool())
+	case KindDuration:
+		return append(dst, v.duration().String()...)
+	case KindTime:
+		return append(dst, v.time().String()...)
+	case KindGroup:
+		return fmt.Append(dst, v.group())
+	case KindAny, KindLogValuer:
+		return fmt.Append(dst, v.any)
+	default:
+		panic(fmt.Sprintf("bad kind: %s", v.Kind()))
+	}
+}
+
+// A LogValuer is any Go value that can convert itself into a Value for logging.
+//
+// This mechanism may be used to defer expensive operations until they are
+// needed, or to expand a single value into a sequence of components.
+type LogValuer interface {
+	LogValue() Value
+}
+
+const maxLogValues = 100
+
+// Resolve repeatedly calls LogValue on v while it implements LogValuer,
+// and returns the result.
+// If v resolves to a group, the group's attributes' values are not recursively
+// resolved.
+// If the number of LogValue calls exceeds a threshold, a Value containing an
+// error is returned.
+// Resolve's return value is guaranteed not to be of Kind KindLogValuer.
+func (v Value) Resolve() (rv Value) {
+	orig := v
+	defer func() {
+		if r := recover(); r != nil {
+			rv = AnyValue(fmt.Errorf("LogValue panicked\n%s", stack(3, 5)))
+		}
+	}()
+
+	for i := 0; i < maxLogValues; i++ {
+		if v.Kind() != KindLogValuer {
+			return v
+		}
+		v = v.LogValuer().LogValue()
+	}
+	err := fmt.Errorf("LogValue called too many times on Value of type %T", orig.Any())
+	return AnyValue(err)
+}
+
+func stack(skip, nFrames int) string {
+	pcs := make([]uintptr, nFrames+1)
+	n := runtime.Callers(skip+1, pcs)
+	if n == 0 {
+		return "(no stack)"
+	}
+	frames := runtime.CallersFrames(pcs[:n])
+	var b strings.Builder
+	i := 0
+	for {
+		frame, more := frames.Next()
+		fmt.Fprintf(&b, "called from %s (%s:%d)\n", frame.Function, frame.File, frame.Line)
+		if !more {
+			break
+		}
+		i++
+		if i >= nFrames {
+			fmt.Fprintf(&b, "(rest of stack elided)\n")
+			break
+		}
+	}
+	return b.String()
+}

vendor/golang.org/x/exp/slog/value_119.go

@@ -0,0 +1,53 @@
+// Copyright 2022 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build go1.19 && !go1.20
+
+package slog
+
+import (
+	"reflect"
+	"unsafe"
+)
+
+type (
+	stringptr unsafe.Pointer // used in Value.any when the Value is a string
+	groupptr  unsafe.Pointer // used in Value.any when the Value is a []Attr
+)
+
+// StringValue returns a new Value for a string.
+func StringValue(value string) Value {
+	hdr := (*reflect.StringHeader)(unsafe.Pointer(&value))
+	return Value{num: uint64(hdr.Len), any: stringptr(hdr.Data)}
+}
+
+func (v Value) str() string {
+	var s string
+	hdr := (*reflect.StringHeader)(unsafe.Pointer(&s))
+	hdr.Data = uintptr(v.any.(stringptr))
+	hdr.Len = int(v.num)
+	return s
+}
+
+// String returns Value's value as a string, formatted like fmt.Sprint. Unlike
+// the methods Int64, Float64, and so on, which panic if v is of the
+// wrong kind, String never panics.
+func (v Value) String() string {
+	if sp, ok := v.any.(stringptr); ok {
+		// Inlining this code makes a huge difference.
+		var s string
+		hdr := (*reflect.StringHeader)(unsafe.Pointer(&s))
+		hdr.Data = uintptr(sp)
+		hdr.Len = int(v.num)
+		return s
+	}
+	return string(v.append(nil))
+}
+
+// GroupValue returns a new Value for a list of Attrs.
+// The caller must not subsequently mutate the argument slice.
+func GroupValue(as ...Attr) Value {
+	hdr := (*reflect.SliceHeader)(unsafe.Pointer(&as))
+	return Value{num: uint64(hdr.Len), any: groupptr(hdr.Data)}
+}

vendor/golang.org/x/exp/slog/value_120.go

@@ -0,0 +1,39 @@
+// Copyright 2022 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build go1.20
+
+package slog
+
+import "unsafe"
+
+type (
+	stringptr *byte // used in Value.any when the Value is a string
+	groupptr  *Attr // used in Value.any when the Value is a []Attr
+)
+
+// StringValue returns a new Value for a string.
+func StringValue(value string) Value {
+	return Value{num: uint64(len(value)), any: stringptr(unsafe.StringData(value))}
+}
+
+// GroupValue returns a new Value for a list of Attrs.
+// The caller must not subsequently mutate the argument slice.
+func GroupValue(as ...Attr) Value {
+	return Value{num: uint64(len(as)), any: groupptr(unsafe.SliceData(as))}
+}
+
+// String returns Value's value as a string, formatted like fmt.Sprint. Unlike
+// the methods Int64, Float64, and so on, which panic if v is of the
+// wrong kind, String never panics.
+func (v Value) String() string {
+	if sp, ok := v.any.(stringptr); ok {
+		return unsafe.String(sp, v.num)
+	}
+	return string(v.append(nil))
+}
+
+func (v Value) str() string {
+	return unsafe.String(v.any.(stringptr), v.num)
+}

vendor/golang.org/x/net/LICENSE

@@ -0,0 +1,27 @@
+Copyright 2009 The Go Authors.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+   * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+   * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+   * Neither the name of Google LLC nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

vendor/golang.org/x/net/PATENTS

@@ -0,0 +1,22 @@
+Additional IP Rights Grant (Patents)
+
+"This implementation" means the copyrightable works distributed by
+Google as part of the Go project.
+
+Google hereby grants to You a perpetual, worldwide, non-exclusive,
+no-charge, royalty-free, irrevocable (except as stated in this section)
+patent license to make, have made, use, offer to sell, sell, import,
+transfer and otherwise run, modify and propagate the contents of this
+implementation of Go, where such license applies only to those patent
+claims, both currently owned or controlled by Google and acquired in
+the future, licensable by Google that are necessarily infringed by this
+implementation of Go.  This grant does not include claims that would be
+infringed only as a consequence of further modification of this
+implementation.  If you or your agent or exclusive licensee institute or
+order or agree to the institution of patent litigation against any
+entity (including a cross-claim or counterclaim in a lawsuit) alleging
+that this implementation of Go or any code incorporated within this
+implementation of Go constitutes direct or contributory patent
+infringement, or inducement of patent infringement, then any patent
+rights granted to you under this License for this implementation of Go
+shall terminate as of the date such litigation is filed.

vendor/golang.org/x/net/html/atom/atom.go

@@ -0,0 +1,78 @@
+// Copyright 2012 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package atom provides integer codes (also known as atoms) for a fixed set of
+// frequently occurring HTML strings: tag names and attribute keys such as "p"
+// and "id".
+//
+// Sharing an atom's name between all elements with the same tag can result in
+// fewer string allocations when tokenizing and parsing HTML. Integer
+// comparisons are also generally faster than string comparisons.
+//
+// The value of an atom's particular code is not guaranteed to stay the same
+// between versions of this package. Neither is any ordering guaranteed:
+// whether atom.H1 < atom.H2 may also change. The codes are not guaranteed to
+// be dense. The only guarantees are that e.g. looking up "div" will yield
+// atom.Div, calling atom.Div.String will return "div", and atom.Div != 0.
+package atom // import "golang.org/x/net/html/atom"
+
+// Atom is an integer code for a string. The zero value maps to "".
+type Atom uint32
+
+// String returns the atom's name.
+func (a Atom) String() string {
+	start := uint32(a >> 8)
+	n := uint32(a & 0xff)
+	if start+n > uint32(len(atomText)) {
+		return ""
+	}
+	return atomText[start : start+n]
+}
+
+func (a Atom) string() string {
+	return atomText[a>>8 : a>>8+a&0xff]
+}
+
+// fnv computes the FNV hash with an arbitrary starting value h.
+func fnv(h uint32, s []byte) uint32 {
+	for i := range s {
+		h ^= uint32(s[i])
+		h *= 16777619
+	}
+	return h
+}
+
+func match(s string, t []byte) bool {
+	for i, c := range t {
+		if s[i] != c {
+			return false
+		}
+	}
+	return true
+}
+
+// Lookup returns the atom whose name is s. It returns zero if there is no
+// such atom. The lookup is case sensitive.
+func Lookup(s []byte) Atom {
+	if len(s) == 0 || len(s) > maxAtomLen {
+		return 0
+	}
+	h := fnv(hash0, s)
+	if a := table[h&uint32(len(table)-1)]; int(a&0xff) == len(s) && match(a.string(), s) {
+		return a
+	}
+	if a := table[(h>>16)&uint32(len(table)-1)]; int(a&0xff) == len(s) && match(a.string(), s) {
+		return a
+	}
+	return 0
+}
+
+// String returns a string whose contents are equal to s. In that sense, it is
+// equivalent to string(s) but may be more efficient.
+func String(s []byte) string {
+	if a := Lookup(s); a != 0 {
+		return a.String()
+	}
+	return string(s)
+}

vendor/golang.org/x/net/html/atom/table.go

@@ -0,0 +1,783 @@
+// Code generated by go generate gen.go; DO NOT EDIT.
+
+//go:generate go run gen.go
+
+package atom
+
+const (
+	A                         Atom = 0x1
+	Abbr                      Atom = 0x4
+	Accept                    Atom = 0x1a06
+	AcceptCharset             Atom = 0x1a0e
+	Accesskey                 Atom = 0x2c09
+	Acronym                   Atom = 0xaa07
+	Action                    Atom = 0x27206
+	Address                   Atom = 0x6f307
+	Align                     Atom = 0xb105
+	Allowfullscreen           Atom = 0x2080f
+	Allowpaymentrequest       Atom = 0xc113
+	Allowusermedia            Atom = 0xdd0e
+	Alt                       Atom = 0xf303
+	Annotation                Atom = 0x1c90a
+	AnnotationXml             Atom = 0x1c90e
+	Applet                    Atom = 0x31906
+	Area                      Atom = 0x35604
+	Article                   Atom = 0x3fc07
+	As                        Atom = 0x3c02
+	Aside                     Atom = 0x10705
+	Async                     Atom = 0xff05
+	Audio                     Atom = 0x11505
+	Autocomplete              Atom = 0x2780c
+	Autofocus                 Atom = 0x12109
+	Autoplay                  Atom = 0x13c08
+	B                         Atom = 0x101
+	Base                      Atom = 0x3b04
+	Basefont                  Atom = 0x3b08
+	Bdi                       Atom = 0xba03
+	Bdo                       Atom = 0x14b03
+	Bgsound                   Atom = 0x15e07
+	Big                       Atom = 0x17003
+	Blink                     Atom = 0x17305
+	Blockquote                Atom = 0x1870a
+	Body                      Atom = 0x2804
+	Br                        Atom = 0x202
+	Button                    Atom = 0x19106
+	Canvas                    Atom = 0x10306
+	Caption                   Atom = 0x23107
+	Center                    Atom = 0x22006
+	Challenge                 Atom = 0x29b09
+	Charset                   Atom = 0x2107
+	Checked                   Atom = 0x47907
+	Cite                      Atom = 0x19c04
+	Class                     Atom = 0x56405
+	Code                      Atom = 0x5c504
+	Col                       Atom = 0x1ab03
+	Colgroup                  Atom = 0x1ab08
+	Color                     Atom = 0x1bf05
+	Cols                      Atom = 0x1c404
+	Colspan                   Atom = 0x1c407
+	Command                   Atom = 0x1d707
+	Content                   Atom = 0x58b07
+	Contenteditable           Atom = 0x58b0f
+	Contextmenu               Atom = 0x3800b
+	Controls                  Atom = 0x1de08
+	Coords                    Atom = 0x1ea06
+	Crossorigin               Atom = 0x1fb0b
+	Data                      Atom = 0x4a504
+	Datalist                  Atom = 0x4a508
+	Datetime                  Atom = 0x2b808
+	Dd                        Atom = 0x2d702
+	Default                   Atom = 0x10a07
+	Defer                     Atom = 0x5c705
+	Del                       Atom = 0x45203
+	Desc                      Atom = 0x56104
+	Details                   Atom = 0x7207
+	Dfn                       Atom = 0x8703
+	Dialog                    Atom = 0xbb06
+	Dir                       Atom = 0x9303
+	Dirname                   Atom = 0x9307
+	Disabled                  Atom = 0x16408
+	Div                       Atom = 0x16b03
+	Dl                        Atom = 0x5e602
+	Download                  Atom = 0x46308
+	Draggable                 Atom = 0x17a09
+	Dropzone                  Atom = 0x40508
+	Dt                        Atom = 0x64b02
+	Em                        Atom = 0x6e02
+	Embed                     Atom = 0x6e05
+	Enctype                   Atom = 0x28d07
+	Face                      Atom = 0x21e04
+	Fieldset                  Atom = 0x22608
+	Figcaption                Atom = 0x22e0a
+	Figure                    Atom = 0x24806
+	Font                      Atom = 0x3f04
+	Footer                    Atom = 0xf606
+	For                       Atom = 0x25403
+	ForeignObject             Atom = 0x2540d
+	Foreignobject             Atom = 0x2610d
+	Form                      Atom = 0x26e04
+	Formaction                Atom = 0x26e0a
+	Formenctype               Atom = 0x2890b
+	Formmethod                Atom = 0x2a40a
+	Formnovalidate            Atom = 0x2ae0e
+	Formtarget                Atom = 0x2c00a
+	Frame                     Atom = 0x8b05
+	Frameset                  Atom = 0x8b08
+	H1                        Atom = 0x15c02
+	H2                        Atom = 0x2de02
+	H3                        Atom = 0x30d02
+	H4                        Atom = 0x34502
+	H5                        Atom = 0x34f02
+	H6                        Atom = 0x64d02
+	Head                      Atom = 0x33104
+	Header                    Atom = 0x33106
+	Headers                   Atom = 0x33107
+	Height                    Atom = 0x5206
+	Hgroup                    Atom = 0x2ca06
+	Hidden                    Atom = 0x2d506
+	High                      Atom = 0x2db04
+	Hr                        Atom = 0x15702
+	Href                      Atom = 0x2e004
+	Hreflang                  Atom = 0x2e008
+	Html                      Atom = 0x5604
+	HttpEquiv                 Atom = 0x2e80a
+	I                         Atom = 0x601
+	Icon                      Atom = 0x58a04
+	Id                        Atom = 0x10902
+	Iframe                    Atom = 0x2fc06
+	Image                     Atom = 0x30205
+	Img                       Atom = 0x30703
+	Input                     Atom = 0x44b05
+	Inputmode                 Atom = 0x44b09
+	Ins                       Atom = 0x20403
+	Integrity                 Atom = 0x23f09
+	Is                        Atom = 0x16502
+	Isindex                   Atom = 0x30f07
+	Ismap                     Atom = 0x31605
+	Itemid                    Atom = 0x38b06
+	Itemprop                  Atom = 0x19d08
+	Itemref                   Atom = 0x3cd07
+	Itemscope                 Atom = 0x67109
+	Itemtype                  Atom = 0x31f08
+	Kbd                       Atom = 0xb903
+	Keygen                    Atom = 0x3206
+	Keytype                   Atom = 0xd607
+	Kind                      Atom = 0x17704
+	Label                     Atom = 0x5905
+	Lang                      Atom = 0x2e404
+	Legend                    Atom = 0x18106
+	Li                        Atom = 0xb202
+	Link                      Atom = 0x17404
+	List                      Atom = 0x4a904
+	Listing                   Atom = 0x4a907
+	Loop                      Atom = 0x5d04
+	Low                       Atom = 0xc303
+	Main                      Atom = 0x1004
+	Malignmark                Atom = 0xb00a
+	Manifest                  Atom = 0x6d708
+	Map                       Atom = 0x31803
+	Mark                      Atom = 0xb604
+	Marquee                   Atom = 0x32707
+	Math                      Atom = 0x32e04
+	Max                       Atom = 0x33d03
+	Maxlength                 Atom = 0x33d09
+	Media                     Atom = 0xe605
+	Mediagroup                Atom = 0xe60a
+	Menu                      Atom = 0x38704
+	Menuitem                  Atom = 0x38708
+	Meta                      Atom = 0x4b804
+	Meter                     Atom = 0x9805
+	Method                    Atom = 0x2a806
+	Mglyph                    Atom = 0x30806
+	Mi                        Atom = 0x34702
+	Min                       Atom = 0x34703
+	Minlength                 Atom = 0x34709
+	Mn                        Atom = 0x2b102
+	Mo                        Atom = 0xa402
+	Ms                        Atom = 0x67402
+	Mtext                     Atom = 0x35105
+	Multiple                  Atom = 0x35f08
+	Muted                     Atom = 0x36705
+	Name                      Atom = 0x9604
+	Nav                       Atom = 0x1303
+	Nobr                      Atom = 0x3704
+	Noembed                   Atom = 0x6c07
+	Noframes                  Atom = 0x8908
+	Nomodule                  Atom = 0xa208
+	Nonce                     Atom = 0x1a605
+	Noscript                  Atom = 0x21608
+	Novalidate                Atom = 0x2b20a
+	Object                    Atom = 0x26806
+	Ol                        Atom = 0x13702
+	Onabort                   Atom = 0x19507
+	Onafterprint              Atom = 0x2360c
+	Onautocomplete            Atom = 0x2760e
+	Onautocompleteerror       Atom = 0x27613
+	Onauxclick                Atom = 0x61f0a
+	Onbeforeprint             Atom = 0x69e0d
+	Onbeforeunload            Atom = 0x6e70e
+	Onblur                    Atom = 0x56d06
+	Oncancel                  Atom = 0x11908
+	Oncanplay                 Atom = 0x14d09
+	Oncanplaythrough          Atom = 0x14d10
+	Onchange                  Atom = 0x41b08
+	Onclick                   Atom = 0x2f507
+	Onclose                   Atom = 0x36c07
+	Oncontextmenu             Atom = 0x37e0d
+	Oncopy                    Atom = 0x39106
+	Oncuechange               Atom = 0x3970b
+	Oncut                     Atom = 0x3a205
+	Ondblclick                Atom = 0x3a70a
+	Ondrag                    Atom = 0x3b106
+	Ondragend                 Atom = 0x3b109
+	Ondragenter               Atom = 0x3ba0b
+	Ondragexit                Atom = 0x3c50a
+	Ondragleave               Atom = 0x3df0b
+	Ondragover                Atom = 0x3ea0a
+	Ondragstart               Atom = 0x3f40b
+	Ondrop                    Atom = 0x40306
+	Ondurationchange          Atom = 0x41310
+	Onemptied                 Atom = 0x40a09
+	Onended                   Atom = 0x42307
+	Onerror                   Atom = 0x42a07
+	Onfocus                   Atom = 0x43107
+	Onhashchange              Atom = 0x43d0c
+	Oninput                   Atom = 0x44907
+	Oninvalid                 Atom = 0x45509
+	Onkeydown                 Atom = 0x45e09
+	Onkeypress                Atom = 0x46b0a
+	Onkeyup                   Atom = 0x48007
+	Onlanguagechange          Atom = 0x48d10
+	Onload                    Atom = 0x49d06
+	Onloadeddata              Atom = 0x49d0c
+	Onloadedmetadata          Atom = 0x4b010
+	Onloadend                 Atom = 0x4c609
+	Onloadstart               Atom = 0x4cf0b
+	Onmessage                 Atom = 0x4da09
+	Onmessageerror            Atom = 0x4da0e
+	Onmousedown               Atom = 0x4e80b
+	Onmouseenter              Atom = 0x4f30c
+	Onmouseleave              Atom = 0x4ff0c
+	Onmousemove               Atom = 0x50b0b
+	Onmouseout                Atom = 0x5160a
+	Onmouseover               Atom = 0x5230b
+	Onmouseup                 Atom = 0x52e09
+	Onmousewheel              Atom = 0x53c0c
+	Onoffline                 Atom = 0x54809
+	Ononline                  Atom = 0x55108
+	Onpagehide                Atom = 0x5590a
+	Onpageshow                Atom = 0x5730a
+	Onpaste                   Atom = 0x57f07
+	Onpause                   Atom = 0x59a07
+	Onplay                    Atom = 0x5a406
+	Onplaying                 Atom = 0x5a409
+	Onpopstate                Atom = 0x5ad0a
+	Onprogress                Atom = 0x5b70a
+	Onratechange              Atom = 0x5cc0c
+	Onrejectionhandled        Atom = 0x5d812
+	Onreset                   Atom = 0x5ea07
+	Onresize                  Atom = 0x5f108
+	Onscroll                  Atom = 0x60008
+	Onsecuritypolicyviolation Atom = 0x60819
+	Onseeked                  Atom = 0x62908
+	Onseeking                 Atom = 0x63109
+	Onselect                  Atom = 0x63a08
+	Onshow                    Atom = 0x64406
+	Onsort                    Atom = 0x64f06
+	Onstalled                 Atom = 0x65909
+	Onstorage                 Atom = 0x66209
+	Onsubmit                  Atom = 0x66b08
+	Onsuspend                 Atom = 0x67b09
+	Ontimeupdate              Atom = 0x400c
+	Ontoggle                  Atom = 0x68408
+	Onunhandledrejection      Atom = 0x68c14
+	Onunload                  Atom = 0x6ab08
+	Onvolumechange            Atom = 0x6b30e
+	Onwaiting                 Atom = 0x6c109
+	Onwheel                   Atom = 0x6ca07
+	Open                      Atom = 0x1a304
+	Optgroup                  Atom = 0x5f08
+	Optimum                   Atom = 0x6d107
+	Option                    Atom = 0x6e306
+	Output                    Atom = 0x51d06
+	P                         Atom = 0xc01
+	Param                     Atom = 0xc05
+	Pattern                   Atom = 0x6607
+	Picture                   Atom = 0x7b07
+	Ping                      Atom = 0xef04
+	Placeholder               Atom = 0x1310b
+	Plaintext                 Atom = 0x1b209
+	Playsinline               Atom = 0x1400b
+	Poster                    Atom = 0x2cf06
+	Pre                       Atom = 0x47003
+	Preload                   Atom = 0x48607
+	Progress                  Atom = 0x5b908
+	Prompt                    Atom = 0x53606
+	Public                    Atom = 0x58606
+	Q                         Atom = 0xcf01
+	Radiogroup                Atom = 0x30a
+	Rb                        Atom = 0x3a02
+	Readonly                  Atom = 0x35708
+	Referrerpolicy            Atom = 0x3d10e
+	Rel                       Atom = 0x48703
+	Required                  Atom = 0x24c08
+	Reversed                  Atom = 0x8008
+	Rows                      Atom = 0x9c04
+	Rowspan                   Atom = 0x9c07
+	Rp                        Atom = 0x23c02
+	Rt                        Atom = 0x19a02
+	Rtc                       Atom = 0x19a03
+	Ruby                      Atom = 0xfb04
+	S                         Atom = 0x2501
+	Samp                      Atom = 0x7804
+	Sandbox                   Atom = 0x12907
+	Scope                     Atom = 0x67505
+	Scoped                    Atom = 0x67506
+	Script                    Atom = 0x21806
+	Seamless                  Atom = 0x37108
+	Section                   Atom = 0x56807
+	Select                    Atom = 0x63c06
+	Selected                  Atom = 0x63c08
+	Shape                     Atom = 0x1e505
+	Size                      Atom = 0x5f504
+	Sizes                     Atom = 0x5f505
+	Slot                      Atom = 0x1ef04
+	Small                     Atom = 0x20605
+	Sortable                  Atom = 0x65108
+	Sorted                    Atom = 0x33706
+	Source                    Atom = 0x37806
+	Spacer                    Atom = 0x43706
+	Span                      Atom = 0x9f04
+	Spellcheck                Atom = 0x4740a
+	Src                       Atom = 0x5c003
+	Srcdoc                    Atom = 0x5c006
+	Srclang                   Atom = 0x5f907
+	Srcset                    Atom = 0x6f906
+	Start                     Atom = 0x3fa05
+	Step                      Atom = 0x58304
+	Strike                    Atom = 0xd206
+	Strong                    Atom = 0x6dd06
+	Style                     Atom = 0x6ff05
+	Sub                       Atom = 0x66d03
+	Summary                   Atom = 0x70407
+	Sup                       Atom = 0x70b03
+	Svg                       Atom = 0x70e03
+	System                    Atom = 0x71106
+	Tabindex                  Atom = 0x4be08
+	Table                     Atom = 0x59505
+	Target                    Atom = 0x2c406
+	Tbody                     Atom = 0x2705
+	Td                        Atom = 0x9202
+	Template                  Atom = 0x71408
+	Textarea                  Atom = 0x35208
+	Tfoot                     Atom = 0xf505
+	Th                        Atom = 0x15602
+	Thead                     Atom = 0x33005
+	Time                      Atom = 0x4204
+	Title                     Atom = 0x11005
+	Tr                        Atom = 0xcc02
+	Track                     Atom = 0x1ba05
+	Translate                 Atom = 0x1f209
+	Tt                        Atom = 0x6802
+	Type                      Atom = 0xd904
+	Typemustmatch             Atom = 0x2900d
+	U                         Atom = 0xb01
+	Ul                        Atom = 0xa702
+	Updateviacache            Atom = 0x460e
+	Usemap                    Atom = 0x59e06
+	Value                     Atom = 0x1505
+	Var                       Atom = 0x16d03
+	Video                     Atom = 0x2f105
+	Wbr                       Atom = 0x57c03
+	Width                     Atom = 0x64905
+	Workertype                Atom = 0x71c0a
+	Wrap                      Atom = 0x72604
+	Xmp                       Atom = 0x12f03
+)
+
+const hash0 = 0x81cdf10e
+
+const maxAtomLen = 25
+
+var table = [1 << 9]Atom{
+	0x1:   0xe60a,  // mediagroup
+	0x2:   0x2e404, // lang
+	0x4:   0x2c09,  // accesskey
+	0x5:   0x8b08,  // frameset
+	0x7:   0x63a08, // onselect
+	0x8:   0x71106, // system
+	0xa:   0x64905, // width
+	0xc:   0x2890b, // formenctype
+	0xd:   0x13702, // ol
+	0xe:   0x3970b, // oncuechange
+	0x10:  0x14b03, // bdo
+	0x11:  0x11505, // audio
+	0x12:  0x17a09, // draggable
+	0x14:  0x2f105, // video
+	0x15:  0x2b102, // mn
+	0x16:  0x38704, // menu
+	0x17:  0x2cf06, // poster
+	0x19:  0xf606,  // footer
+	0x1a:  0x2a806, // method
+	0x1b:  0x2b808, // datetime
+	0x1c:  0x19507, // onabort
+	0x1d:  0x460e,  // updateviacache
+	0x1e:  0xff05,  // async
+	0x1f:  0x49d06, // onload
+	0x21:  0x11908, // oncancel
+	0x22:  0x62908, // onseeked
+	0x23:  0x30205, // image
+	0x24:  0x5d812, // onrejectionhandled
+	0x26:  0x17404, // link
+	0x27:  0x51d06, // output
+	0x28:  0x33104, // head
+	0x29:  0x4ff0c, // onmouseleave
+	0x2a:  0x57f07, // onpaste
+	0x2b:  0x5a409, // onplaying
+	0x2c:  0x1c407, // colspan
+	0x2f:  0x1bf05, // color
+	0x30:  0x5f504, // size
+	0x31:  0x2e80a, // http-equiv
+	0x33:  0x601,   // i
+	0x34:  0x5590a, // onpagehide
+	0x35:  0x68c14, // onunhandledrejection
+	0x37:  0x42a07, // onerror
+	0x3a:  0x3b08,  // basefont
+	0x3f:  0x1303,  // nav
+	0x40:  0x17704, // kind
+	0x41:  0x35708, // readonly
+	0x42:  0x30806, // mglyph
+	0x44:  0xb202,  // li
+	0x46:  0x2d506, // hidden
+	0x47:  0x70e03, // svg
+	0x48:  0x58304, // step
+	0x49:  0x23f09, // integrity
+	0x4a:  0x58606, // public
+	0x4c:  0x1ab03, // col
+	0x4d:  0x1870a, // blockquote
+	0x4e:  0x34f02, // h5
+	0x50:  0x5b908, // progress
+	0x51:  0x5f505, // sizes
+	0x52:  0x34502, // h4
+	0x56:  0x33005, // thead
+	0x57:  0xd607,  // keytype
+	0x58:  0x5b70a, // onprogress
+	0x59:  0x44b09, // inputmode
+	0x5a:  0x3b109, // ondragend
+	0x5d:  0x3a205, // oncut
+	0x5e:  0x43706, // spacer
+	0x5f:  0x1ab08, // colgroup
+	0x62:  0x16502, // is
+	0x65:  0x3c02,  // as
+	0x66:  0x54809, // onoffline
+	0x67:  0x33706, // sorted
+	0x69:  0x48d10, // onlanguagechange
+	0x6c:  0x43d0c, // onhashchange
+	0x6d:  0x9604,  // name
+	0x6e:  0xf505,  // tfoot
+	0x6f:  0x56104, // desc
+	0x70:  0x33d03, // max
+	0x72:  0x1ea06, // coords
+	0x73:  0x30d02, // h3
+	0x74:  0x6e70e, // onbeforeunload
+	0x75:  0x9c04,  // rows
+	0x76:  0x63c06, // select
+	0x77:  0x9805,  // meter
+	0x78:  0x38b06, // itemid
+	0x79:  0x53c0c, // onmousewheel
+	0x7a:  0x5c006, // srcdoc
+	0x7d:  0x1ba05, // track
+	0x7f:  0x31f08, // itemtype
+	0x82:  0xa402,  // mo
+	0x83:  0x41b08, // onchange
+	0x84:  0x33107, // headers
+	0x85:  0x5cc0c, // onratechange
+	0x86:  0x60819, // onsecuritypolicyviolation
+	0x88:  0x4a508, // datalist
+	0x89:  0x4e80b, // onmousedown
+	0x8a:  0x1ef04, // slot
+	0x8b:  0x4b010, // onloadedmetadata
+	0x8c:  0x1a06,  // accept
+	0x8d:  0x26806, // object
+	0x91:  0x6b30e, // onvolumechange
+	0x92:  0x2107,  // charset
+	0x93:  0x27613, // onautocompleteerror
+	0x94:  0xc113,  // allowpaymentrequest
+	0x95:  0x2804,  // body
+	0x96:  0x10a07, // default
+	0x97:  0x63c08, // selected
+	0x98:  0x21e04, // face
+	0x99:  0x1e505, // shape
+	0x9b:  0x68408, // ontoggle
+	0x9e:  0x64b02, // dt
+	0x9f:  0xb604,  // mark
+	0xa1:  0xb01,   // u
+	0xa4:  0x6ab08, // onunload
+	0xa5:  0x5d04,  // loop
+	0xa6:  0x16408, // disabled
+	0xaa:  0x42307, // onended
+	0xab:  0xb00a,  // malignmark
+	0xad:  0x67b09, // onsuspend
+	0xae:  0x35105, // mtext
+	0xaf:  0x64f06, // onsort
+	0xb0:  0x19d08, // itemprop
+	0xb3:  0x67109, // itemscope
+	0xb4:  0x17305, // blink
+	0xb6:  0x3b106, // ondrag
+	0xb7:  0xa702,  // ul
+	0xb8:  0x26e04, // form
+	0xb9:  0x12907, // sandbox
+	0xba:  0x8b05,  // frame
+	0xbb:  0x1505,  // value
+	0xbc:  0x66209, // onstorage
+	0xbf:  0xaa07,  // acronym
+	0xc0:  0x19a02, // rt
+	0xc2:  0x202,   // br
+	0xc3:  0x22608, // fieldset
+	0xc4:  0x2900d, // typemustmatch
+	0xc5:  0xa208,  // nomodule
+	0xc6:  0x6c07,  // noembed
+	0xc7:  0x69e0d, // onbeforeprint
+	0xc8:  0x19106, // button
+	0xc9:  0x2f507, // onclick
+	0xca:  0x70407, // summary
+	0xcd:  0xfb04,  // ruby
+	0xce:  0x56405, // class
+	0xcf:  0x3f40b, // ondragstart
+	0xd0:  0x23107, // caption
+	0xd4:  0xdd0e,  // allowusermedia
+	0xd5:  0x4cf0b, // onloadstart
+	0xd9:  0x16b03, // div
+	0xda:  0x4a904, // list
+	0xdb:  0x32e04, // math
+	0xdc:  0x44b05, // input
+	0xdf:  0x3ea0a, // ondragover
+	0xe0:  0x2de02, // h2
+	0xe2:  0x1b209, // plaintext
+	0xe4:  0x4f30c, // onmouseenter
+	0xe7:  0x47907, // checked
+	0xe8:  0x47003, // pre
+	0xea:  0x35f08, // multiple
+	0xeb:  0xba03,  // bdi
+	0xec:  0x33d09, // maxlength
+	0xed:  0xcf01,  // q
+	0xee:  0x61f0a, // onauxclick
+	0xf0:  0x57c03, // wbr
+	0xf2:  0x3b04,  // base
+	0xf3:  0x6e306, // option
+	0xf5:  0x41310, // ondurationchange
+	0xf7:  0x8908,  // noframes
+	0xf9:  0x40508, // dropzone
+	0xfb:  0x67505, // scope
+	0xfc:  0x8008,  // reversed
+	0xfd:  0x3ba0b, // ondragenter
+	0xfe:  0x3fa05, // start
+	0xff:  0x12f03, // xmp
+	0x100: 0x5f907, // srclang
+	0x101: 0x30703, // img
+	0x104: 0x101,   // b
+	0x105: 0x25403, // for
+	0x106: 0x10705, // aside
+	0x107: 0x44907, // oninput
+	0x108: 0x35604, // area
+	0x109: 0x2a40a, // formmethod
+	0x10a: 0x72604, // wrap
+	0x10c: 0x23c02, // rp
+	0x10d: 0x46b0a, // onkeypress
+	0x10e: 0x6802,  // tt
+	0x110: 0x34702, // mi
+	0x111: 0x36705, // muted
+	0x112: 0xf303,  // alt
+	0x113: 0x5c504, // code
+	0x114: 0x6e02,  // em
+	0x115: 0x3c50a, // ondragexit
+	0x117: 0x9f04,  // span
+	0x119: 0x6d708, // manifest
+	0x11a: 0x38708, // menuitem
+	0x11b: 0x58b07, // content
+	0x11d: 0x6c109, // onwaiting
+	0x11f: 0x4c609, // onloadend
+	0x121: 0x37e0d, // oncontextmenu
+	0x123: 0x56d06, // onblur
+	0x124: 0x3fc07, // article
+	0x125: 0x9303,  // dir
+	0x126: 0xef04,  // ping
+	0x127: 0x24c08, // required
+	0x128: 0x45509, // oninvalid
+	0x129: 0xb105,  // align
+	0x12b: 0x58a04, // icon
+	0x12c: 0x64d02, // h6
+	0x12d: 0x1c404, // cols
+	0x12e: 0x22e0a, // figcaption
+	0x12f: 0x45e09, // onkeydown
+	0x130: 0x66b08, // onsubmit
+	0x131: 0x14d09, // oncanplay
+	0x132: 0x70b03, // sup
+	0x133: 0xc01,   // p
+	0x135: 0x40a09, // onemptied
+	0x136: 0x39106, // oncopy
+	0x137: 0x19c04, // cite
+	0x138: 0x3a70a, // ondblclick
+	0x13a: 0x50b0b, // onmousemove
+	0x13c: 0x66d03, // sub
+	0x13d: 0x48703, // rel
+	0x13e: 0x5f08,  // optgroup
+	0x142: 0x9c07,  // rowspan
+	0x143: 0x37806, // source
+	0x144: 0x21608, // noscript
+	0x145: 0x1a304, // open
+	0x146: 0x20403, // ins
+	0x147: 0x2540d, // foreignObject
+	0x148: 0x5ad0a, // onpopstate
+	0x14a: 0x28d07, // enctype
+	0x14b: 0x2760e, // onautocomplete
+	0x14c: 0x35208, // textarea
+	0x14e: 0x2780c, // autocomplete
+	0x14f: 0x15702, // hr
+	0x150: 0x1de08, // controls
+	0x151: 0x10902, // id
+	0x153: 0x2360c, // onafterprint
+	0x155: 0x2610d, // foreignobject
+	0x156: 0x32707, // marquee
+	0x157: 0x59a07, // onpause
+	0x158: 0x5e602, // dl
+	0x159: 0x5206,  // height
+	0x15a: 0x34703, // min
+	0x15b: 0x9307,  // dirname
+	0x15c: 0x1f209, // translate
+	0x15d: 0x5604,  // html
+	0x15e: 0x34709, // minlength
+	0x15f: 0x48607, // preload
+	0x160: 0x71408, // template
+	0x161: 0x3df0b, // ondragleave
+	0x162: 0x3a02,  // rb
+	0x164: 0x5c003, // src
+	0x165: 0x6dd06, // strong
+	0x167: 0x7804,  // samp
+	0x168: 0x6f307, // address
+	0x169: 0x55108, // ononline
+	0x16b: 0x1310b, // placeholder
+	0x16c: 0x2c406, // target
+	0x16d: 0x20605, // small
+	0x16e: 0x6ca07, // onwheel
+	0x16f: 0x1c90a, // annotation
+	0x170: 0x4740a, // spellcheck
+	0x171: 0x7207,  // details
+	0x172: 0x10306, // canvas
+	0x173: 0x12109, // autofocus
+	0x174: 0xc05,   // param
+	0x176: 0x46308, // download
+	0x177: 0x45203, // del
+	0x178: 0x36c07, // onclose
+	0x179: 0xb903,  // kbd
+	0x17a: 0x31906, // applet
+	0x17b: 0x2e004, // href
+	0x17c: 0x5f108, // onresize
+	0x17e: 0x49d0c, // onloadeddata
+	0x180: 0xcc02,  // tr
+	0x181: 0x2c00a, // formtarget
+	0x182: 0x11005, // title
+	0x183: 0x6ff05, // style
+	0x184: 0xd206,  // strike
+	0x185: 0x59e06, // usemap
+	0x186: 0x2fc06, // iframe
+	0x187: 0x1004,  // main
+	0x189: 0x7b07,  // picture
+	0x18c: 0x31605, // ismap
+	0x18e: 0x4a504, // data
+	0x18f: 0x5905,  // label
+	0x191: 0x3d10e, // referrerpolicy
+	0x192: 0x15602, // th
+	0x194: 0x53606, // prompt
+	0x195: 0x56807, // section
+	0x197: 0x6d107, // optimum
+	0x198: 0x2db04, // high
+	0x199: 0x15c02, // h1
+	0x19a: 0x65909, // onstalled
+	0x19b: 0x16d03, // var
+	0x19c: 0x4204,  // time
+	0x19e: 0x67402, // ms
+	0x19f: 0x33106, // header
+	0x1a0: 0x4da09, // onmessage
+	0x1a1: 0x1a605, // nonce
+	0x1a2: 0x26e0a, // formaction
+	0x1a3: 0x22006, // center
+	0x1a4: 0x3704,  // nobr
+	0x1a5: 0x59505, // table
+	0x1a6: 0x4a907, // listing
+	0x1a7: 0x18106, // legend
+	0x1a9: 0x29b09, // challenge
+	0x1aa: 0x24806, // figure
+	0x1ab: 0xe605,  // media
+	0x1ae: 0xd904,  // type
+	0x1af: 0x3f04,  // font
+	0x1b0: 0x4da0e, // onmessageerror
+	0x1b1: 0x37108, // seamless
+	0x1b2: 0x8703,  // dfn
+	0x1b3: 0x5c705, // defer
+	0x1b4: 0xc303,  // low
+	0x1b5: 0x19a03, // rtc
+	0x1b6: 0x5230b, // onmouseover
+	0x1b7: 0x2b20a, // novalidate
+	0x1b8: 0x71c0a, // workertype
+	0x1ba: 0x3cd07, // itemref
+	0x1bd: 0x1,     // a
+	0x1be: 0x31803, // map
+	0x1bf: 0x400c,  // ontimeupdate
+	0x1c0: 0x15e07, // bgsound
+	0x1c1: 0x3206,  // keygen
+	0x1c2: 0x2705,  // tbody
+	0x1c5: 0x64406, // onshow
+	0x1c7: 0x2501,  // s
+	0x1c8: 0x6607,  // pattern
+	0x1cc: 0x14d10, // oncanplaythrough
+	0x1ce: 0x2d702, // dd
+	0x1cf: 0x6f906, // srcset
+	0x1d0: 0x17003, // big
+	0x1d2: 0x65108, // sortable
+	0x1d3: 0x48007, // onkeyup
+	0x1d5: 0x5a406, // onplay
+	0x1d7: 0x4b804, // meta
+	0x1d8: 0x40306, // ondrop
+	0x1da: 0x60008, // onscroll
+	0x1db: 0x1fb0b, // crossorigin
+	0x1dc: 0x5730a, // onpageshow
+	0x1dd: 0x4,     // abbr
+	0x1de: 0x9202,  // td
+	0x1df: 0x58b0f, // contenteditable
+	0x1e0: 0x27206, // action
+	0x1e1: 0x1400b, // playsinline
+	0x1e2: 0x43107, // onfocus
+	0x1e3: 0x2e008, // hreflang
+	0x1e5: 0x5160a, // onmouseout
+	0x1e6: 0x5ea07, // onreset
+	0x1e7: 0x13c08, // autoplay
+	0x1e8: 0x63109, // onseeking
+	0x1ea: 0x67506, // scoped
+	0x1ec: 0x30a,   // radiogroup
+	0x1ee: 0x3800b, // contextmenu
+	0x1ef: 0x52e09, // onmouseup
+	0x1f1: 0x2ca06, // hgroup
+	0x1f2: 0x2080f, // allowfullscreen
+	0x1f3: 0x4be08, // tabindex
+	0x1f6: 0x30f07, // isindex
+	0x1f7: 0x1a0e,  // accept-charset
+	0x1f8: 0x2ae0e, // formnovalidate
+	0x1fb: 0x1c90e, // annotation-xml
+	0x1fc: 0x6e05,  // embed
+	0x1fd: 0x21806, // script
+	0x1fe: 0xbb06,  // dialog
+	0x1ff: 0x1d707, // command
+}
+
+const atomText = "abbradiogrouparamainavalueaccept-charsetbodyaccesskeygenobrb" +
+	"asefontimeupdateviacacheightmlabelooptgroupatternoembedetail" +
+	"sampictureversedfnoframesetdirnameterowspanomoduleacronymali" +
+	"gnmarkbdialogallowpaymentrequestrikeytypeallowusermediagroup" +
+	"ingaltfooterubyasyncanvasidefaultitleaudioncancelautofocusan" +
+	"dboxmplaceholderautoplaysinlinebdoncanplaythrough1bgsoundisa" +
+	"bledivarbigblinkindraggablegendblockquotebuttonabortcitempro" +
+	"penoncecolgrouplaintextrackcolorcolspannotation-xmlcommandco" +
+	"ntrolshapecoordslotranslatecrossoriginsmallowfullscreenoscri" +
+	"ptfacenterfieldsetfigcaptionafterprintegrityfigurequiredfore" +
+	"ignObjectforeignobjectformactionautocompleteerrorformenctype" +
+	"mustmatchallengeformmethodformnovalidatetimeformtargethgroup" +
+	"osterhiddenhigh2hreflanghttp-equivideonclickiframeimageimgly" +
+	"ph3isindexismappletitemtypemarqueematheadersortedmaxlength4m" +
+	"inlength5mtextareadonlymultiplemutedoncloseamlessourceoncont" +
+	"extmenuitemidoncopyoncuechangeoncutondblclickondragendondrag" +
+	"enterondragexitemreferrerpolicyondragleaveondragoverondragst" +
+	"articleondropzonemptiedondurationchangeonendedonerroronfocus" +
+	"paceronhashchangeoninputmodeloninvalidonkeydownloadonkeypres" +
+	"spellcheckedonkeyupreloadonlanguagechangeonloadeddatalisting" +
+	"onloadedmetadatabindexonloadendonloadstartonmessageerroronmo" +
+	"usedownonmouseenteronmouseleaveonmousemoveonmouseoutputonmou" +
+	"seoveronmouseupromptonmousewheelonofflineononlineonpagehides" +
+	"classectionbluronpageshowbronpastepublicontenteditableonpaus" +
+	"emaponplayingonpopstateonprogressrcdocodeferonratechangeonre" +
+	"jectionhandledonresetonresizesrclangonscrollonsecuritypolicy" +
+	"violationauxclickonseekedonseekingonselectedonshowidth6onsor" +
+	"tableonstalledonstorageonsubmitemscopedonsuspendontoggleonun" +
+	"handledrejectionbeforeprintonunloadonvolumechangeonwaitingon" +
+	"wheeloptimumanifestrongoptionbeforeunloaddressrcsetstylesumm" +
+	"arysupsvgsystemplateworkertypewrap"

vendor/golang.org/x/net/html/const.go

@@ -0,0 +1,111 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package html
+
+// Section 12.2.4.2 of the HTML5 specification says "The following elements
+// have varying levels of special parsing rules".
+// https://html.spec.whatwg.org/multipage/syntax.html#the-stack-of-open-elements
+var isSpecialElementMap = map[string]bool{
+	"address":    true,
+	"applet":     true,
+	"area":       true,
+	"article":    true,
+	"aside":      true,
+	"base":       true,
+	"basefont":   true,
+	"bgsound":    true,
+	"blockquote": true,
+	"body":       true,
+	"br":         true,
+	"button":     true,
+	"caption":    true,
+	"center":     true,
+	"col":        true,
+	"colgroup":   true,
+	"dd":         true,
+	"details":    true,
+	"dir":        true,
+	"div":        true,
+	"dl":         true,
+	"dt":         true,
+	"embed":      true,
+	"fieldset":   true,
+	"figcaption": true,
+	"figure":     true,
+	"footer":     true,
+	"form":       true,
+	"frame":      true,
+	"frameset":   true,
+	"h1":         true,
+	"h2":         true,
+	"h3":         true,
+	"h4":         true,
+	"h5":         true,
+	"h6":         true,
+	"head":       true,
+	"header":     true,
+	"hgroup":     true,
+	"hr":         true,
+	"html":       true,
+	"iframe":     true,
+	"img":        true,
+	"input":      true,
+	"keygen":     true, // "keygen" has been removed from the spec, but are kept here for backwards compatibility.
+	"li":         true,
+	"link":       true,
+	"listing":    true,
+	"main":       true,
+	"marquee":    true,
+	"menu":       true,
+	"meta":       true,
+	"nav":        true,
+	"noembed":    true,
+	"noframes":   true,
+	"noscript":   true,
+	"object":     true,
+	"ol":         true,
+	"p":          true,
+	"param":      true,
+	"plaintext":  true,
+	"pre":        true,
+	"script":     true,
+	"section":    true,
+	"select":     true,
+	"source":     true,
+	"style":      true,
+	"summary":    true,
+	"table":      true,
+	"tbody":      true,
+	"td":         true,
+	"template":   true,
+	"textarea":   true,
+	"tfoot":      true,
+	"th":         true,
+	"thead":      true,
+	"title":      true,
+	"tr":         true,
+	"track":      true,
+	"ul":         true,
+	"wbr":        true,
+	"xmp":        true,
+}
+
+func isSpecialElement(element *Node) bool {
+	switch element.Namespace {
+	case "", "html":
+		return isSpecialElementMap[element.Data]
+	case "math":
+		switch element.Data {
+		case "mi", "mo", "mn", "ms", "mtext", "annotation-xml":
+			return true
+		}
+	case "svg":
+		switch element.Data {
+		case "foreignObject", "desc", "title":
+			return true
+		}
+	}
+	return false
+}

vendor/golang.org/x/net/html/doc.go

@@ -0,0 +1,122 @@
+// Copyright 2010 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+/*
+Package html implements an HTML5-compliant tokenizer and parser.
+
+Tokenization is done by creating a Tokenizer for an io.Reader r. It is the
+caller's responsibility to ensure that r provides UTF-8 encoded HTML.
+
+	z := html.NewTokenizer(r)
+
+Given a Tokenizer z, the HTML is tokenized by repeatedly calling z.Next(),
+which parses the next token and returns its type, or an error:
+
+	for {
+		tt := z.Next()
+		if tt == html.ErrorToken {
+			// ...
+			return ...
+		}
+		// Process the current token.
+	}
+
+There are two APIs for retrieving the current token. The high-level API is to
+call Token; the low-level API is to call Text or TagName / TagAttr. Both APIs
+allow optionally calling Raw after Next but before Token, Text, TagName, or
+TagAttr. In EBNF notation, the valid call sequence per token is:
+
+	Next {Raw} [ Token | Text | TagName {TagAttr} ]
+
+Token returns an independent data structure that completely describes a token.
+Entities (such as "<") are unescaped, tag names and attribute keys are
+lower-cased, and attributes are collected into a []Attribute. For example:
+
+	for {
+		if z.Next() == html.ErrorToken {
+			// Returning io.EOF indicates success.
+			return z.Err()
+		}
+		emitToken(z.Token())
+	}
+
+The low-level API performs fewer allocations and copies, but the contents of
+the []byte values returned by Text, TagName and TagAttr may change on the next
+call to Next. For example, to extract an HTML page's anchor text:
+
+	depth := 0
+	for {
+		tt := z.Next()
+		switch tt {
+		case html.ErrorToken:
+			return z.Err()
+		case html.TextToken:
+			if depth > 0 {
+				// emitBytes should copy the []byte it receives,
+				// if it doesn't process it immediately.
+				emitBytes(z.Text())
+			}
+		case html.StartTagToken, html.EndTagToken:
+			tn, _ := z.TagName()
+			if len(tn) == 1 && tn[0] == 'a' {
+				if tt == html.StartTagToken {
+					depth++
+				} else {
+					depth--
+				}
+			}
+		}
+	}
+
+Parsing is done by calling Parse with an io.Reader, which returns the root of
+the parse tree (the document element) as a *Node. It is the caller's
+responsibility to ensure that the Reader provides UTF-8 encoded HTML. For
+example, to process each anchor node in depth-first order:
+
+	doc, err := html.Parse(r)
+	if err != nil {
+		// ...
+	}
+	for n := range doc.Descendants() {
+		if n.Type == html.ElementNode && n.Data == "a" {
+			// Do something with n...
+		}
+	}
+
+The relevant specifications include:
+https://html.spec.whatwg.org/multipage/syntax.html and
+https://html.spec.whatwg.org/multipage/syntax.html#tokenization
+
+# Security Considerations
+
+Care should be taken when parsing and interpreting HTML, whether full documents
+or fragments, within the framework of the HTML specification, especially with
+regard to untrusted inputs.
+
+This package provides both a tokenizer and a parser, which implement the
+tokenization, and tokenization and tree construction stages of the WHATWG HTML
+parsing specification respectively. While the tokenizer parses and normalizes
+individual HTML tokens, only the parser constructs the DOM tree from the
+tokenized HTML, as described in the tree construction stage of the
+specification, dynamically modifying or extending the document's DOM tree.
+
+If your use case requires semantically well-formed HTML documents, as defined by
+the WHATWG specification, the parser should be used rather than the tokenizer.
+
+In security contexts, if trust decisions are being made using the tokenized or
+parsed content, the input must be re-serialized (for instance by using Render or
+Token.String) in order for those trust decisions to hold, as the process of
+tokenization or parsing may alter the content.
+*/
+package html // import "golang.org/x/net/html"
+
+// The tokenization algorithm implemented by this package is not a line-by-line
+// transliteration of the relatively verbose state-machine in the WHATWG
+// specification. A more direct approach is used instead, where the program
+// counter implies the state, such as whether it is tokenizing a tag or a text
+// node. Specification compliance is verified by checking expected and actual
+// outputs over a test suite rather than aiming for algorithmic fidelity.
+
+// TODO(nigeltao): Does a DOM API belong in this package or a separate one?
+// TODO(nigeltao): How does parsing interact with a JavaScript engine?

vendor/golang.org/x/net/html/doctype.go

@@ -0,0 +1,156 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package html
+
+import (
+	"strings"
+)
+
+// parseDoctype parses the data from a DoctypeToken into a name,
+// public identifier, and system identifier. It returns a Node whose Type
+// is DoctypeNode, whose Data is the name, and which has attributes
+// named "system" and "public" for the two identifiers if they were present.
+// quirks is whether the document should be parsed in "quirks mode".
+func parseDoctype(s string) (n *Node, quirks bool) {
+	n = &Node{Type: DoctypeNode}
+
+	// Find the name.
+	space := strings.IndexAny(s, whitespace)
+	if space == -1 {
+		space = len(s)
+	}
+	n.Data = s[:space]
+	// The comparison to "html" is case-sensitive.
+	if n.Data != "html" {
+		quirks = true
+	}
+	n.Data = strings.ToLower(n.Data)
+	s = strings.TrimLeft(s[space:], whitespace)
+
+	if len(s) < 6 {
+		// It can't start with "PUBLIC" or "SYSTEM".
+		// Ignore the rest of the string.
+		return n, quirks || s != ""
+	}
+
+	key := strings.ToLower(s[:6])
+	s = s[6:]
+	for key == "public" || key == "system" {
+		s = strings.TrimLeft(s, whitespace)
+		if s == "" {
+			break
+		}
+		quote := s[0]
+		if quote != '"' && quote != '\'' {
+			break
+		}
+		s = s[1:]
+		q := strings.IndexRune(s, rune(quote))
+		var id string
+		if q == -1 {
+			id = s
+			s = ""
+		} else {
+			id = s[:q]
+			s = s[q+1:]
+		}
+		n.Attr = append(n.Attr, Attribute{Key: key, Val: id})
+		if key == "public" {
+			key = "system"
+		} else {
+			key = ""
+		}
+	}
+
+	if key != "" || s != "" {
+		quirks = true
+	} else if len(n.Attr) > 0 {
+		if n.Attr[0].Key == "public" {
+			public := strings.ToLower(n.Attr[0].Val)
+			switch public {
+			case "-//w3o//dtd w3 html strict 3.0//en//", "-/w3d/dtd html 4.0 transitional/en", "html":
+				quirks = true
+			default:
+				for _, q := range quirkyIDs {
+					if strings.HasPrefix(public, q) {
+						quirks = true
+						break
+					}
+				}
+			}
+			// The following two public IDs only cause quirks mode if there is no system ID.
+			if len(n.Attr) == 1 && (strings.HasPrefix(public, "-//w3c//dtd html 4.01 frameset//") ||
+				strings.HasPrefix(public, "-//w3c//dtd html 4.01 transitional//")) {
+				quirks = true
+			}
+		}
+		if lastAttr := n.Attr[len(n.Attr)-1]; lastAttr.Key == "system" &&
+			strings.EqualFold(lastAttr.Val, "http://www.ibm.com/data/dtd/v11/ibmxhtml1-transitional.dtd") {
+			quirks = true
+		}
+	}
+
+	return n, quirks
+}
+
+// quirkyIDs is a list of public doctype identifiers that cause a document
+// to be interpreted in quirks mode. The identifiers should be in lower case.
+var quirkyIDs = []string{
+	"+//silmaril//dtd html pro v0r11 19970101//",
+	"-//advasoft ltd//dtd html 3.0 aswedit + extensions//",
+	"-//as//dtd html 3.0 aswedit + extensions//",
+	"-//ietf//dtd html 2.0 level 1//",
+	"-//ietf//dtd html 2.0 level 2//",
+	"-//ietf//dtd html 2.0 strict level 1//",
+	"-//ietf//dtd html 2.0 strict level 2//",
+	"-//ietf//dtd html 2.0 strict//",
+	"-//ietf//dtd html 2.0//",
+	"-//ietf//dtd html 2.1e//",
+	"-//ietf//dtd html 3.0//",
+	"-//ietf//dtd html 3.2 final//",
+	"-//ietf//dtd html 3.2//",
+	"-//ietf//dtd html 3//",
+	"-//ietf//dtd html level 0//",
+	"-//ietf//dtd html level 1//",
+	"-//ietf//dtd html level 2//",
+	"-//ietf//dtd html level 3//",
+	"-//ietf//dtd html strict level 0//",
+	"-//ietf//dtd html strict level 1//",
+	"-//ietf//dtd html strict level 2//",
+	"-//ietf//dtd html strict level 3//",
+	"-//ietf//dtd html strict//",
+	"-//ietf//dtd html//",
+	"-//metrius//dtd metrius presentational//",
+	"-//microsoft//dtd internet explorer 2.0 html strict//",
+	"-//microsoft//dtd internet explorer 2.0 html//",
+	"-//microsoft//dtd internet explorer 2.0 tables//",
+	"-//microsoft//dtd internet explorer 3.0 html strict//",
+	"-//microsoft//dtd internet explorer 3.0 html//",
+	"-//microsoft//dtd internet explorer 3.0 tables//",
+	"-//netscape comm. corp.//dtd html//",
+	"-//netscape comm. corp.//dtd strict html//",
+	"-//o'reilly and associates//dtd html 2.0//",
+	"-//o'reilly and associates//dtd html extended 1.0//",
+	"-//o'reilly and associates//dtd html extended relaxed 1.0//",
+	"-//softquad software//dtd hotmetal pro 6.0::19990601::extensions to html 4.0//",
+	"-//softquad//dtd hotmetal pro 4.0::19971010::extensions to html 4.0//",
+	"-//spyglass//dtd html 2.0 extended//",
+	"-//sq//dtd html 2.0 hotmetal + extensions//",
+	"-//sun microsystems corp.//dtd hotjava html//",
+	"-//sun microsystems corp.//dtd hotjava strict html//",
+	"-//w3c//dtd html 3 1995-03-24//",
+	"-//w3c//dtd html 3.2 draft//",
+	"-//w3c//dtd html 3.2 final//",
+	"-//w3c//dtd html 3.2//",
+	"-//w3c//dtd html 3.2s draft//",
+	"-//w3c//dtd html 4.0 frameset//",
+	"-//w3c//dtd html 4.0 transitional//",
+	"-//w3c//dtd html experimental 19960712//",
+	"-//w3c//dtd html experimental 970421//",
+	"-//w3c//dtd w3 html//",
+	"-//w3o//dtd w3 html 3.0//",
+	"-//webtechs//dtd mozilla html 2.0//",
+	"-//webtechs//dtd mozilla html//",
+}

vendor/golang.org/x/net/html/escape.go

@@ -0,0 +1,339 @@
+// Copyright 2010 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package html
+
+import (
+	"bytes"
+	"strings"
+	"unicode/utf8"
+)
+
+// These replacements permit compatibility with old numeric entities that
+// assumed Windows-1252 encoding.
+// https://html.spec.whatwg.org/multipage/syntax.html#consume-a-character-reference
+var replacementTable = [...]rune{
+	'\u20AC', // First entry is what 0x80 should be replaced with.
+	'\u0081',
+	'\u201A',
+	'\u0192',
+	'\u201E',
+	'\u2026',
+	'\u2020',
+	'\u2021',
+	'\u02C6',
+	'\u2030',
+	'\u0160',
+	'\u2039',
+	'\u0152',
+	'\u008D',
+	'\u017D',
+	'\u008F',
+	'\u0090',
+	'\u2018',
+	'\u2019',
+	'\u201C',
+	'\u201D',
+	'\u2022',
+	'\u2013',
+	'\u2014',
+	'\u02DC',
+	'\u2122',
+	'\u0161',
+	'\u203A',
+	'\u0153',
+	'\u009D',
+	'\u017E',
+	'\u0178', // Last entry is 0x9F.
+	// 0x00->'\uFFFD' is handled programmatically.
+	// 0x0D->'\u000D' is a no-op.
+}
+
+// unescapeEntity reads an entity like "<" from b[src:] and writes the
+// corresponding "<" to b[dst:], returning the incremented dst and src cursors.
+// Precondition: b[src] == '&' && dst <= src.
+// attribute should be true if parsing an attribute value.
+func unescapeEntity(b []byte, dst, src int, attribute bool) (dst1, src1 int) {
+	// https://html.spec.whatwg.org/multipage/syntax.html#consume-a-character-reference
+
+	// i starts at 1 because we already know that s[0] == '&'.
+	i, s := 1, b[src:]
+
+	if len(s) <= 1 {
+		b[dst] = b[src]
+		return dst + 1, src + 1
+	}
+
+	if s[i] == '#' {
+		if len(s) <= 3 { // We need to have at least "&#.".
+			b[dst] = b[src]
+			return dst + 1, src + 1
+		}
+		i++
+		c := s[i]
+		hex := false
+		if c == 'x' || c == 'X' {
+			hex = true
+			i++
+		}
+
+		x := '\x00'
+		for i < len(s) {
+			c = s[i]
+			i++
+			if hex {
+				if '0' <= c && c <= '9' {
+					x = 16*x + rune(c) - '0'
+					continue
+				} else if 'a' <= c && c <= 'f' {
+					x = 16*x + rune(c) - 'a' + 10
+					continue
+				} else if 'A' <= c && c <= 'F' {
+					x = 16*x + rune(c) - 'A' + 10
+					continue
+				}
+			} else if '0' <= c && c <= '9' {
+				x = 10*x + rune(c) - '0'
+				continue
+			}
+			if c != ';' {
+				i--
+			}
+			break
+		}
+
+		if i <= 3 { // No characters matched.
+			b[dst] = b[src]
+			return dst + 1, src + 1
+		}
+
+		if 0x80 <= x && x <= 0x9F {
+			// Replace characters from Windows-1252 with UTF-8 equivalents.
+			x = replacementTable[x-0x80]
+		} else if x == 0 || (0xD800 <= x && x <= 0xDFFF) || x > 0x10FFFF {
+			// Replace invalid characters with the replacement character.
+			x = '\uFFFD'
+		}
+
+		return dst + utf8.EncodeRune(b[dst:], x), src + i
+	}
+
+	// Consume the maximum number of characters possible, with the
+	// consumed characters matching one of the named references.
+
+	for i < len(s) {
+		c := s[i]
+		i++
+		// Lower-cased characters are more common in entities, so we check for them first.
+		if 'a' <= c && c <= 'z' || 'A' <= c && c <= 'Z' || '0' <= c && c <= '9' {
+			continue
+		}
+		if c != ';' {
+			i--
+		}
+		break
+	}
+
+	entityName := string(s[1:i])
+	if entityName == "" {
+		// No-op.
+	} else if attribute && entityName[len(entityName)-1] != ';' && len(s) > i && s[i] == '=' {
+		// No-op.
+	} else if x := entity[entityName]; x != 0 {
+		return dst + utf8.EncodeRune(b[dst:], x), src + i
+	} else if x := entity2[entityName]; x[0] != 0 {
+		dst1 := dst + utf8.EncodeRune(b[dst:], x[0])
+		return dst1 + utf8.EncodeRune(b[dst1:], x[1]), src + i
+	} else if !attribute {
+		maxLen := len(entityName) - 1
+		if maxLen > longestEntityWithoutSemicolon {
+			maxLen = longestEntityWithoutSemicolon
+		}
+		for j := maxLen; j > 1; j-- {
+			if x := entity[entityName[:j]]; x != 0 {
+				return dst + utf8.EncodeRune(b[dst:], x), src + j + 1
+			}
+		}
+	}
+
+	dst1, src1 = dst+i, src+i
+	copy(b[dst:dst1], b[src:src1])
+	return dst1, src1
+}
+
+// unescape unescapes b's entities in-place, so that "a&lt;b" becomes "a<b".
+// attribute should be true if parsing an attribute value.
+func unescape(b []byte, attribute bool) []byte {
+	for i, c := range b {
+		if c == '&' {
+			dst, src := unescapeEntity(b, i, i, attribute)
+			for src < len(b) {
+				c := b[src]
+				if c == '&' {
+					dst, src = unescapeEntity(b, dst, src, attribute)
+				} else {
+					b[dst] = c
+					dst, src = dst+1, src+1
+				}
+			}
+			return b[0:dst]
+		}
+	}
+	return b
+}
+
+// lower lower-cases the A-Z bytes in b in-place, so that "aBc" becomes "abc".
+func lower(b []byte) []byte {
+	for i, c := range b {
+		if 'A' <= c && c <= 'Z' {
+			b[i] = c + 'a' - 'A'
+		}
+	}
+	return b
+}
+
+// escapeComment is like func escape but escapes its input bytes less often.
+// Per https://github.com/golang/go/issues/58246 some HTML comments are (1)
+// meaningful and (2) contain angle brackets that we'd like to avoid escaping
+// unless we have to.
+//
+// "We have to" includes the '&' byte, since that introduces other escapes.
+//
+// It also includes those bytes (not including EOF) that would otherwise end
+// the comment. Per the summary table at the bottom of comment_test.go, this is
+// the '>' byte that, per above, we'd like to avoid escaping unless we have to.
+//
+// Studying the summary table (and T actions in its '>' column) closely, we
+// only need to escape in states 43, 44, 49, 51 and 52. State 43 is at the
+// start of the comment data. State 52 is after a '!'. The other three states
+// are after a '-'.
+//
+// Our algorithm is thus to escape every '&' and to escape '>' if and only if:
+//   - The '>' is after a '!' or '-' (in the unescaped data) or
+//   - The '>' is at the start of the comment data (after the opening "<!--").
+func escapeComment(w writer, s string) error {
+	// When modifying this function, consider manually increasing the
+	// maxSuffixLen constant in func TestComments, from 6 to e.g. 9 or more.
+	// That increase should only be temporary, not committed, as it
+	// exponentially affects the test running time.
+
+	if len(s) == 0 {
+		return nil
+	}
+
+	// Loop:
+	//   - Grow j such that s[i:j] does not need escaping.
+	//   - If s[j] does need escaping, output s[i:j] and an escaped s[j],
+	//     resetting i and j to point past that s[j] byte.
+	i := 0
+	for j := 0; j < len(s); j++ {
+		escaped := ""
+		switch s[j] {
+		case '&':
+			escaped = "&amp;"
+
+		case '>':
+			if j > 0 {
+				if prev := s[j-1]; (prev != '!') && (prev != '-') {
+					continue
+				}
+			}
+			escaped = "&gt;"
+
+		default:
+			continue
+		}
+
+		if i < j {
+			if _, err := w.WriteString(s[i:j]); err != nil {
+				return err
+			}
+		}
+		if _, err := w.WriteString(escaped); err != nil {
+			return err
+		}
+		i = j + 1
+	}
+
+	if i < len(s) {
+		if _, err := w.WriteString(s[i:]); err != nil {
+			return err
+		}
+	}
+	return nil
+}
+
+// escapeCommentString is to EscapeString as escapeComment is to escape.
+func escapeCommentString(s string) string {
+	if strings.IndexAny(s, "&>") == -1 {
+		return s
+	}
+	var buf bytes.Buffer
+	escapeComment(&buf, s)
+	return buf.String()
+}
+
+const escapedChars = "&'<>\"\r"
+
+func escape(w writer, s string) error {
+	i := strings.IndexAny(s, escapedChars)
+	for i != -1 {
+		if _, err := w.WriteString(s[:i]); err != nil {
+			return err
+		}
+		var esc string
+		switch s[i] {
+		case '&':
+			esc = "&amp;"
+		case '\'':
+			// "&#39;" is shorter than "&apos;" and apos was not in HTML until HTML5.
+			esc = "&#39;"
+		case '<':
+			esc = "&lt;"
+		case '>':
+			esc = "&gt;"
+		case '"':
+			// "&#34;" is shorter than "&quot;".
+			esc = "&#34;"
+		case '\r':
+			esc = "&#13;"
+		default:
+			panic("unrecognized escape character")
+		}
+		s = s[i+1:]
+		if _, err := w.WriteString(esc); err != nil {
+			return err
+		}
+		i = strings.IndexAny(s, escapedChars)
+	}
+	_, err := w.WriteString(s)
+	return err
+}
+
+// EscapeString escapes special characters like "<" to become "&lt;". It
+// escapes only five such characters: <, >, &, ' and ".
+// UnescapeString(EscapeString(s)) == s always holds, but the converse isn't
+// always true.
+func EscapeString(s string) string {
+	if strings.IndexAny(s, escapedChars) == -1 {
+		return s
+	}
+	var buf bytes.Buffer
+	escape(&buf, s)
+	return buf.String()
+}
+
+// UnescapeString unescapes entities like "&lt;" to become "<". It unescapes a
+// larger range of entities than EscapeString escapes. For example, "&aacute;"
+// unescapes to "á", as does "&#225;" and "&xE1;".
+// UnescapeString(EscapeString(s)) == s always holds, but the converse isn't
+// always true.
+func UnescapeString(s string) string {
+	for _, c := range s {
+		if c == '&' {
+			return string(unescape([]byte(s), false))
+		}
+	}
+	return s
+}

vendor/golang.org/x/net/html/foreign.go

@@ -0,0 +1,221 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package html
+
+import (
+	"strings"
+)
+
+func adjustAttributeNames(aa []Attribute, nameMap map[string]string) {
+	for i := range aa {
+		if newName, ok := nameMap[aa[i].Key]; ok {
+			aa[i].Key = newName
+		}
+	}
+}
+
+func adjustForeignAttributes(aa []Attribute) {
+	for i, a := range aa {
+		if a.Key == "" || a.Key[0] != 'x' {
+			continue
+		}
+		switch a.Key {
+		case "xlink:actuate", "xlink:arcrole", "xlink:href", "xlink:role", "xlink:show",
+			"xlink:title", "xlink:type", "xml:base", "xml:lang", "xml:space", "xmlns:xlink":
+			j := strings.Index(a.Key, ":")
+			aa[i].Namespace = a.Key[:j]
+			aa[i].Key = a.Key[j+1:]
+		}
+	}
+}
+
+func htmlIntegrationPoint(n *Node) bool {
+	if n.Type != ElementNode {
+		return false
+	}
+	switch n.Namespace {
+	case "math":
+		if n.Data == "annotation-xml" {
+			for _, a := range n.Attr {
+				if a.Key == "encoding" {
+					if strings.EqualFold(a.Val, "text/html") || strings.EqualFold(a.Val, "application/xhtml+xml") {
+						return true
+					}
+				}
+			}
+		}
+	case "svg":
+		switch n.Data {
+		case "desc", "foreignObject", "title":
+			return true
+		}
+	}
+	return false
+}
+
+func mathMLTextIntegrationPoint(n *Node) bool {
+	if n.Namespace != "math" {
+		return false
+	}
+	switch n.Data {
+	case "mi", "mo", "mn", "ms", "mtext":
+		return true
+	}
+	return false
+}
+
+// Section 12.2.6.5.
+var breakout = map[string]bool{
+	"b":          true,
+	"big":        true,
+	"blockquote": true,
+	"body":       true,
+	"br":         true,
+	"center":     true,
+	"code":       true,
+	"dd":         true,
+	"div":        true,
+	"dl":         true,
+	"dt":         true,
+	"em":         true,
+	"embed":      true,
+	"h1":         true,
+	"h2":         true,
+	"h3":         true,
+	"h4":         true,
+	"h5":         true,
+	"h6":         true,
+	"head":       true,
+	"hr":         true,
+	"i":          true,
+	"img":        true,
+	"li":         true,
+	"listing":    true,
+	"menu":       true,
+	"meta":       true,
+	"nobr":       true,
+	"ol":         true,
+	"p":          true,
+	"pre":        true,
+	"ruby":       true,
+	"s":          true,
+	"small":      true,
+	"span":       true,
+	"strong":     true,
+	"strike":     true,
+	"sub":        true,
+	"sup":        true,
+	"table":      true,
+	"tt":         true,
+	"u":          true,
+	"ul":         true,
+	"var":        true,
+}
+
+// Section 12.2.6.5.
+var svgTagNameAdjustments = map[string]string{
+	"altglyph":            "altGlyph",
+	"altglyphdef":         "altGlyphDef",
+	"altglyphitem":        "altGlyphItem",
+	"animatecolor":        "animateColor",
+	"animatemotion":       "animateMotion",
+	"animatetransform":    "animateTransform",
+	"clippath":            "clipPath",
+	"feblend":             "feBlend",
+	"fecolormatrix":       "feColorMatrix",
+	"fecomponenttransfer": "feComponentTransfer",
+	"fecomposite":         "feComposite",
+	"feconvolvematrix":    "feConvolveMatrix",
+	"fediffuselighting":   "feDiffuseLighting",
+	"fedisplacementmap":   "feDisplacementMap",
+	"fedistantlight":      "feDistantLight",
+	"feflood":             "feFlood",
+	"fefunca":             "feFuncA",
+	"fefuncb":             "feFuncB",
+	"fefuncg":             "feFuncG",
+	"fefuncr":             "feFuncR",
+	"fegaussianblur":      "feGaussianBlur",
+	"feimage":             "feImage",
+	"femerge":             "feMerge",
+	"femergenode":         "feMergeNode",
+	"femorphology":        "feMorphology",
+	"feoffset":            "feOffset",
+	"fepointlight":        "fePointLight",
+	"fespecularlighting":  "feSpecularLighting",
+	"fespotlight":         "feSpotLight",
+	"fetile":              "feTile",
+	"feturbulence":        "feTurbulence",
+	"foreignobject":       "foreignObject",
+	"glyphref":            "glyphRef",
+	"lineargradient":      "linearGradient",
+	"radialgradient":      "radialGradient",
+	"textpath":            "textPath",
+}
+
+// Section 12.2.6.1
+var mathMLAttributeAdjustments = map[string]string{
+	"definitionurl": "definitionURL",
+}
+
+var svgAttributeAdjustments = map[string]string{
+	"attributename":       "attributeName",
+	"attributetype":       "attributeType",
+	"basefrequency":       "baseFrequency",
+	"baseprofile":         "baseProfile",
+	"calcmode":            "calcMode",
+	"clippathunits":       "clipPathUnits",
+	"diffuseconstant":     "diffuseConstant",
+	"edgemode":            "edgeMode",
+	"filterunits":         "filterUnits",
+	"glyphref":            "glyphRef",
+	"gradienttransform":   "gradientTransform",
+	"gradientunits":       "gradientUnits",
+	"kernelmatrix":        "kernelMatrix",
+	"kernelunitlength":    "kernelUnitLength",
+	"keypoints":           "keyPoints",
+	"keysplines":          "keySplines",
+	"keytimes":            "keyTimes",
+	"lengthadjust":        "lengthAdjust",
+	"limitingconeangle":   "limitingConeAngle",
+	"markerheight":        "markerHeight",
+	"markerunits":         "markerUnits",
+	"markerwidth":         "markerWidth",
+	"maskcontentunits":    "maskContentUnits",
+	"maskunits":           "maskUnits",
+	"numoctaves":          "numOctaves",
+	"pathlength":          "pathLength",
+	"patterncontentunits": "patternContentUnits",
+	"patterntransform":    "patternTransform",
+	"patternunits":        "patternUnits",
+	"pointsatx":           "pointsAtX",
+	"pointsaty":           "pointsAtY",
+	"pointsatz":           "pointsAtZ",
+	"preservealpha":       "preserveAlpha",
+	"preserveaspectratio": "preserveAspectRatio",
+	"primitiveunits":      "primitiveUnits",
+	"refx":                "refX",
+	"refy":                "refY",
+	"repeatcount":         "repeatCount",
+	"repeatdur":           "repeatDur",
+	"requiredextensions":  "requiredExtensions",
+	"requiredfeatures":    "requiredFeatures",
+	"specularconstant":    "specularConstant",
+	"specularexponent":    "specularExponent",
+	"spreadmethod":        "spreadMethod",
+	"startoffset":         "startOffset",
+	"stddeviation":        "stdDeviation",
+	"stitchtiles":         "stitchTiles",
+	"surfacescale":        "surfaceScale",
+	"systemlanguage":      "systemLanguage",
+	"tablevalues":         "tableValues",
+	"targetx":             "targetX",
+	"targety":             "targetY",
+	"textlength":          "textLength",
+	"viewbox":             "viewBox",
+	"viewtarget":          "viewTarget",
+	"xchannelselector":    "xChannelSelector",
+	"ychannelselector":    "yChannelSelector",
+	"zoomandpan":          "zoomAndPan",
+}

vendor/golang.org/x/net/html/iter.go

@@ -0,0 +1,56 @@
+// Copyright 2024 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build go1.23
+
+package html
+
+import "iter"
+
+// Ancestors returns an iterator over the ancestors of n, starting with n.Parent.
+//
+// Mutating a Node or its parents while iterating may have unexpected results.
+func (n *Node) Ancestors() iter.Seq[*Node] {
+	_ = n.Parent // eager nil check
+
+	return func(yield func(*Node) bool) {
+		for p := n.Parent; p != nil && yield(p); p = p.Parent {
+		}
+	}
+}
+
+// ChildNodes returns an iterator over the immediate children of n,
+// starting with n.FirstChild.
+//
+// Mutating a Node or its children while iterating may have unexpected results.
+func (n *Node) ChildNodes() iter.Seq[*Node] {
+	_ = n.FirstChild // eager nil check
+
+	return func(yield func(*Node) bool) {
+		for c := n.FirstChild; c != nil && yield(c); c = c.NextSibling {
+		}
+	}
+
+}
+
+// Descendants returns an iterator over all nodes recursively beneath
+// n, excluding n itself. Nodes are visited in depth-first preorder.
+//
+// Mutating a Node or its descendants while iterating may have unexpected results.
+func (n *Node) Descendants() iter.Seq[*Node] {
+	_ = n.FirstChild // eager nil check
+
+	return func(yield func(*Node) bool) {
+		n.descendants(yield)
+	}
+}
+
+func (n *Node) descendants(yield func(*Node) bool) bool {
+	for c := range n.ChildNodes() {
+		if !yield(c) || !c.descendants(yield) {
+			return false
+		}
+	}
+	return true
+}

vendor/golang.org/x/net/html/node.go

@@ -0,0 +1,229 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package html
+
+import (
+	"golang.org/x/net/html/atom"
+)
+
+// A NodeType is the type of a Node.
+type NodeType uint32
+
+const (
+	ErrorNode NodeType = iota
+	TextNode
+	DocumentNode
+	ElementNode
+	CommentNode
+	DoctypeNode
+	// RawNode nodes are not returned by the parser, but can be part of the
+	// Node tree passed to func Render to insert raw HTML (without escaping).
+	// If so, this package makes no guarantee that the rendered HTML is secure
+	// (from e.g. Cross Site Scripting attacks) or well-formed.
+	RawNode
+	scopeMarkerNode
+)
+
+// Section 12.2.4.3 says "The markers are inserted when entering applet,
+// object, marquee, template, td, th, and caption elements, and are used
+// to prevent formatting from "leaking" into applet, object, marquee,
+// template, td, th, and caption elements".
+var scopeMarker = Node{Type: scopeMarkerNode}
+
+// A Node consists of a NodeType and some Data (tag name for element nodes,
+// content for text) and are part of a tree of Nodes. Element nodes may also
+// have a Namespace and contain a slice of Attributes. Data is unescaped, so
+// that it looks like "a<b" rather than "a&lt;b". For element nodes, DataAtom
+// is the atom for Data, or zero if Data is not a known tag name.
+//
+// Node trees may be navigated using the link fields (Parent,
+// FirstChild, and so on) or a range loop over iterators such as
+// [Node.Descendants].
+//
+// An empty Namespace implies a "http://www.w3.org/1999/xhtml" namespace.
+// Similarly, "math" is short for "http://www.w3.org/1998/Math/MathML", and
+// "svg" is short for "http://www.w3.org/2000/svg".
+type Node struct {
+	Parent, FirstChild, LastChild, PrevSibling, NextSibling *Node
+
+	Type      NodeType
+	DataAtom  atom.Atom
+	Data      string
+	Namespace string
+	Attr      []Attribute
+}
+
+// InsertBefore inserts newChild as a child of n, immediately before oldChild
+// in the sequence of n's children. oldChild may be nil, in which case newChild
+// is appended to the end of n's children.
+//
+// It will panic if newChild already has a parent or siblings.
+func (n *Node) InsertBefore(newChild, oldChild *Node) {
+	if newChild.Parent != nil || newChild.PrevSibling != nil || newChild.NextSibling != nil {
+		panic("html: InsertBefore called for an attached child Node")
+	}
+	var prev, next *Node
+	if oldChild != nil {
+		prev, next = oldChild.PrevSibling, oldChild
+	} else {
+		prev = n.LastChild
+	}
+	if prev != nil {
+		prev.NextSibling = newChild
+	} else {
+		n.FirstChild = newChild
+	}
+	if next != nil {
+		next.PrevSibling = newChild
+	} else {
+		n.LastChild = newChild
+	}
+	newChild.Parent = n
+	newChild.PrevSibling = prev
+	newChild.NextSibling = next
+}
+
+// AppendChild adds a node c as a child of n.
+//
+// It will panic if c already has a parent or siblings.
+func (n *Node) AppendChild(c *Node) {
+	if c.Parent != nil || c.PrevSibling != nil || c.NextSibling != nil {
+		panic("html: AppendChild called for an attached child Node")
+	}
+	last := n.LastChild
+	if last != nil {
+		last.NextSibling = c
+	} else {
+		n.FirstChild = c
+	}
+	n.LastChild = c
+	c.Parent = n
+	c.PrevSibling = last
+}
+
+// RemoveChild removes a node c that is a child of n. Afterwards, c will have
+// no parent and no siblings.
+//
+// It will panic if c's parent is not n.
+func (n *Node) RemoveChild(c *Node) {
+	if c.Parent != n {
+		panic("html: RemoveChild called for a non-child Node")
+	}
+	if n.FirstChild == c {
+		n.FirstChild = c.NextSibling
+	}
+	if c.NextSibling != nil {
+		c.NextSibling.PrevSibling = c.PrevSibling
+	}
+	if n.LastChild == c {
+		n.LastChild = c.PrevSibling
+	}
+	if c.PrevSibling != nil {
+		c.PrevSibling.NextSibling = c.NextSibling
+	}
+	c.Parent = nil
+	c.PrevSibling = nil
+	c.NextSibling = nil
+}
+
+// reparentChildren reparents all of src's child nodes to dst.
+func reparentChildren(dst, src *Node) {
+	for {
+		child := src.FirstChild
+		if child == nil {
+			break
+		}
+		src.RemoveChild(child)
+		dst.AppendChild(child)
+	}
+}
+
+// clone returns a new node with the same type, data and attributes.
+// The clone has no parent, no siblings and no children.
+func (n *Node) clone() *Node {
+	m := &Node{
+		Type:     n.Type,
+		DataAtom: n.DataAtom,
+		Data:     n.Data,
+		Attr:     make([]Attribute, len(n.Attr)),
+	}
+	copy(m.Attr, n.Attr)
+	return m
+}
+
+// nodeStack is a stack of nodes.
+type nodeStack []*Node
+
+// pop pops the stack. It will panic if s is empty.
+func (s *nodeStack) pop() *Node {
+	i := len(*s)
+	n := (*s)[i-1]
+	*s = (*s)[:i-1]
+	return n
+}
+
+// top returns the most recently pushed node, or nil if s is empty.
+func (s *nodeStack) top() *Node {
+	if i := len(*s); i > 0 {
+		return (*s)[i-1]
+	}
+	return nil
+}
+
+// index returns the index of the top-most occurrence of n in the stack, or -1
+// if n is not present.
+func (s *nodeStack) index(n *Node) int {
+	for i := len(*s) - 1; i >= 0; i-- {
+		if (*s)[i] == n {
+			return i
+		}
+	}
+	return -1
+}
+
+// contains returns whether a is within s.
+func (s *nodeStack) contains(a atom.Atom) bool {
+	for _, n := range *s {
+		if n.DataAtom == a && n.Namespace == "" {
+			return true
+		}
+	}
+	return false
+}
+
+// insert inserts a node at the given index.
+func (s *nodeStack) insert(i int, n *Node) {
+	(*s) = append(*s, nil)
+	copy((*s)[i+1:], (*s)[i:])
+	(*s)[i] = n
+}
+
+// remove removes a node from the stack. It is a no-op if n is not present.
+func (s *nodeStack) remove(n *Node) {
+	i := s.index(n)
+	if i == -1 {
+		return
+	}
+	copy((*s)[i:], (*s)[i+1:])
+	j := len(*s) - 1
+	(*s)[j] = nil
+	*s = (*s)[:j]
+}
+
+type insertionModeStack []insertionMode
+
+func (s *insertionModeStack) pop() (im insertionMode) {
+	i := len(*s)
+	im = (*s)[i-1]
+	*s = (*s)[:i-1]
+	return im
+}
+
+func (s *insertionModeStack) top() insertionMode {
+	if i := len(*s); i > 0 {
+		return (*s)[i-1]
+	}
+	return nil
+}

vendor/golang.org/x/net/html/render.go

@@ -0,0 +1,293 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package html
+
+import (
+	"bufio"
+	"errors"
+	"fmt"
+	"io"
+	"strings"
+)
+
+type writer interface {
+	io.Writer
+	io.ByteWriter
+	WriteString(string) (int, error)
+}
+
+// Render renders the parse tree n to the given writer.
+//
+// Rendering is done on a 'best effort' basis: calling Parse on the output of
+// Render will always result in something similar to the original tree, but it
+// is not necessarily an exact clone unless the original tree was 'well-formed'.
+// 'Well-formed' is not easily specified; the HTML5 specification is
+// complicated.
+//
+// Calling Parse on arbitrary input typically results in a 'well-formed' parse
+// tree. However, it is possible for Parse to yield a 'badly-formed' parse tree.
+// For example, in a 'well-formed' parse tree, no <a> element is a child of
+// another <a> element: parsing "<a><a>" results in two sibling elements.
+// Similarly, in a 'well-formed' parse tree, no <a> element is a child of a
+// <table> element: parsing "<p><table><a>" results in a <p> with two sibling
+// children; the <a> is reparented to the <table>'s parent. However, calling
+// Parse on "<a><table><a>" does not return an error, but the result has an <a>
+// element with an <a> child, and is therefore not 'well-formed'.
+//
+// Programmatically constructed trees are typically also 'well-formed', but it
+// is possible to construct a tree that looks innocuous but, when rendered and
+// re-parsed, results in a different tree. A simple example is that a solitary
+// text node would become a tree containing <html>, <head> and <body> elements.
+// Another example is that the programmatic equivalent of "a<head>b</head>c"
+// becomes "<html><head><head/><body>abc</body></html>".
+func Render(w io.Writer, n *Node) error {
+	if x, ok := w.(writer); ok {
+		return render(x, n)
+	}
+	buf := bufio.NewWriter(w)
+	if err := render(buf, n); err != nil {
+		return err
+	}
+	return buf.Flush()
+}
+
+// plaintextAbort is returned from render1 when a <plaintext> element
+// has been rendered. No more end tags should be rendered after that.
+var plaintextAbort = errors.New("html: internal error (plaintext abort)")
+
+func render(w writer, n *Node) error {
+	err := render1(w, n)
+	if err == plaintextAbort {
+		err = nil
+	}
+	return err
+}
+
+func render1(w writer, n *Node) error {
+	// Render non-element nodes; these are the easy cases.
+	switch n.Type {
+	case ErrorNode:
+		return errors.New("html: cannot render an ErrorNode node")
+	case TextNode:
+		return escape(w, n.Data)
+	case DocumentNode:
+		for c := n.FirstChild; c != nil; c = c.NextSibling {
+			if err := render1(w, c); err != nil {
+				return err
+			}
+		}
+		return nil
+	case ElementNode:
+		// No-op.
+	case CommentNode:
+		if _, err := w.WriteString("<!--"); err != nil {
+			return err
+		}
+		if err := escapeComment(w, n.Data); err != nil {
+			return err
+		}
+		if _, err := w.WriteString("-->"); err != nil {
+			return err
+		}
+		return nil
+	case DoctypeNode:
+		if _, err := w.WriteString("<!DOCTYPE "); err != nil {
+			return err
+		}
+		if err := escape(w, n.Data); err != nil {
+			return err
+		}
+		if n.Attr != nil {
+			var p, s string
+			for _, a := range n.Attr {
+				switch a.Key {
+				case "public":
+					p = a.Val
+				case "system":
+					s = a.Val
+				}
+			}
+			if p != "" {
+				if _, err := w.WriteString(" PUBLIC "); err != nil {
+					return err
+				}
+				if err := writeQuoted(w, p); err != nil {
+					return err
+				}
+				if s != "" {
+					if err := w.WriteByte(' '); err != nil {
+						return err
+					}
+					if err := writeQuoted(w, s); err != nil {
+						return err
+					}
+				}
+			} else if s != "" {
+				if _, err := w.WriteString(" SYSTEM "); err != nil {
+					return err
+				}
+				if err := writeQuoted(w, s); err != nil {
+					return err
+				}
+			}
+		}
+		return w.WriteByte('>')
+	case RawNode:
+		_, err := w.WriteString(n.Data)
+		return err
+	default:
+		return errors.New("html: unknown node type")
+	}
+
+	// Render the <xxx> opening tag.
+	if err := w.WriteByte('<'); err != nil {
+		return err
+	}
+	if _, err := w.WriteString(n.Data); err != nil {
+		return err
+	}
+	for _, a := range n.Attr {
+		if err := w.WriteByte(' '); err != nil {
+			return err
+		}
+		if a.Namespace != "" {
+			if _, err := w.WriteString(a.Namespace); err != nil {
+				return err
+			}
+			if err := w.WriteByte(':'); err != nil {
+				return err
+			}
+		}
+		if _, err := w.WriteString(a.Key); err != nil {
+			return err
+		}
+		if _, err := w.WriteString(`="`); err != nil {
+			return err
+		}
+		if err := escape(w, a.Val); err != nil {
+			return err
+		}
+		if err := w.WriteByte('"'); err != nil {
+			return err
+		}
+	}
+	if voidElements[n.Data] {
+		if n.FirstChild != nil {
+			return fmt.Errorf("html: void element <%s> has child nodes", n.Data)
+		}
+		_, err := w.WriteString("/>")
+		return err
+	}
+	if err := w.WriteByte('>'); err != nil {
+		return err
+	}
+
+	// Add initial newline where there is danger of a newline beging ignored.
+	if c := n.FirstChild; c != nil && c.Type == TextNode && strings.HasPrefix(c.Data, "\n") {
+		switch n.Data {
+		case "pre", "listing", "textarea":
+			if err := w.WriteByte('\n'); err != nil {
+				return err
+			}
+		}
+	}
+
+	// Render any child nodes
+	if childTextNodesAreLiteral(n) {
+		for c := n.FirstChild; c != nil; c = c.NextSibling {
+			if c.Type == TextNode {
+				if _, err := w.WriteString(c.Data); err != nil {
+					return err
+				}
+			} else {
+				if err := render1(w, c); err != nil {
+					return err
+				}
+			}
+		}
+		if n.Data == "plaintext" {
+			// Don't render anything else. <plaintext> must be the
+			// last element in the file, with no closing tag.
+			return plaintextAbort
+		}
+	} else {
+		for c := n.FirstChild; c != nil; c = c.NextSibling {
+			if err := render1(w, c); err != nil {
+				return err
+			}
+		}
+	}
+
+	// Render the </xxx> closing tag.
+	if _, err := w.WriteString("</"); err != nil {
+		return err
+	}
+	if _, err := w.WriteString(n.Data); err != nil {
+		return err
+	}
+	return w.WriteByte('>')
+}
+
+func childTextNodesAreLiteral(n *Node) bool {
+	// Per WHATWG HTML 13.3, if the parent of the current node is a style,
+	// script, xmp, iframe, noembed, noframes, or plaintext element, and the
+	// current node is a text node, append the value of the node's data
+	// literally. The specification is not explicit about it, but we only
+	// enforce this if we are in the HTML namespace (i.e. when the namespace is
+	// "").
+	// NOTE: we also always include noscript elements, although the
+	// specification states that they should only be rendered as such if
+	// scripting is enabled for the node (which is not something we track).
+	if n.Namespace != "" {
+		return false
+	}
+	switch n.Data {
+	case "iframe", "noembed", "noframes", "noscript", "plaintext", "script", "style", "xmp":
+		return true
+	default:
+		return false
+	}
+}
+
+// writeQuoted writes s to w surrounded by quotes. Normally it will use double
+// quotes, but if s contains a double quote, it will use single quotes.
+// It is used for writing the identifiers in a doctype declaration.
+// In valid HTML, they can't contain both types of quotes.
+func writeQuoted(w writer, s string) error {
+	var q byte = '"'
+	if strings.Contains(s, `"`) {
+		q = '\''
+	}
+	if err := w.WriteByte(q); err != nil {
+		return err
+	}
+	if _, err := w.WriteString(s); err != nil {
+		return err
+	}
+	if err := w.WriteByte(q); err != nil {
+		return err
+	}
+	return nil
+}
+
+// Section 12.1.2, "Elements", gives this list of void elements. Void elements
+// are those that can't have any contents.
+var voidElements = map[string]bool{
+	"area":   true,
+	"base":   true,
+	"br":     true,
+	"col":    true,
+	"embed":  true,
+	"hr":     true,
+	"img":    true,
+	"input":  true,
+	"keygen": true, // "keygen" has been removed from the spec, but are kept here for backwards compatibility.
+	"link":   true,
+	"meta":   true,
+	"param":  true,
+	"source": true,
+	"track":  true,
+	"wbr":    true,
+}

vendor/golang.org/x/sync/LICENSE

@@ -0,0 +1,27 @@
+Copyright 2009 The Go Authors.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+   * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+   * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+   * Neither the name of Google LLC nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

vendor/golang.org/x/sync/PATENTS

@@ -0,0 +1,22 @@
+Additional IP Rights Grant (Patents)
+
+"This implementation" means the copyrightable works distributed by
+Google as part of the Go project.
+
+Google hereby grants to You a perpetual, worldwide, non-exclusive,
+no-charge, royalty-free, irrevocable (except as stated in this section)
+patent license to make, have made, use, offer to sell, sell, import,
+transfer and otherwise run, modify and propagate the contents of this
+implementation of Go, where such license applies only to those patent
+claims, both currently owned or controlled by Google and acquired in
+the future, licensable by Google that are necessarily infringed by this
+implementation of Go.  This grant does not include claims that would be
+infringed only as a consequence of further modification of this
+implementation.  If you or your agent or exclusive licensee institute or
+order or agree to the institution of patent litigation against any
+entity (including a cross-claim or counterclaim in a lawsuit) alleging
+that this implementation of Go or any code incorporated within this
+implementation of Go constitutes direct or contributory patent
+infringement, or inducement of patent infringement, then any patent
+rights granted to you under this License for this implementation of Go
+shall terminate as of the date such litigation is filed.

vendor/golang.org/x/sync/semaphore/semaphore.go

@@ -0,0 +1,160 @@
+// Copyright 2017 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package semaphore provides a weighted semaphore implementation.
+package semaphore // import "golang.org/x/sync/semaphore"
+
+import (
+	"container/list"
+	"context"
+	"sync"
+)
+
+type waiter struct {
+	n     int64
+	ready chan<- struct{} // Closed when semaphore acquired.
+}
+
+// NewWeighted creates a new weighted semaphore with the given
+// maximum combined weight for concurrent access.
+func NewWeighted(n int64) *Weighted {
+	w := &Weighted{size: n}
+	return w
+}
+
+// Weighted provides a way to bound concurrent access to a resource.
+// The callers can request access with a given weight.
+type Weighted struct {
+	size    int64
+	cur     int64
+	mu      sync.Mutex
+	waiters list.List
+}
+
+// Acquire acquires the semaphore with a weight of n, blocking until resources
+// are available or ctx is done. On success, returns nil. On failure, returns
+// ctx.Err() and leaves the semaphore unchanged.
+func (s *Weighted) Acquire(ctx context.Context, n int64) error {
+	done := ctx.Done()
+
+	s.mu.Lock()
+	select {
+	case <-done:
+		// ctx becoming done has "happened before" acquiring the semaphore,
+		// whether it became done before the call began or while we were
+		// waiting for the mutex. We prefer to fail even if we could acquire
+		// the mutex without blocking.
+		s.mu.Unlock()
+		return ctx.Err()
+	default:
+	}
+	if s.size-s.cur >= n && s.waiters.Len() == 0 {
+		// Since we hold s.mu and haven't synchronized since checking done, if
+		// ctx becomes done before we return here, it becoming done must have
+		// "happened concurrently" with this call - it cannot "happen before"
+		// we return in this branch. So, we're ok to always acquire here.
+		s.cur += n
+		s.mu.Unlock()
+		return nil
+	}
+
+	if n > s.size {
+		// Don't make other Acquire calls block on one that's doomed to fail.
+		s.mu.Unlock()
+		<-done
+		return ctx.Err()
+	}
+
+	ready := make(chan struct{})
+	w := waiter{n: n, ready: ready}
+	elem := s.waiters.PushBack(w)
+	s.mu.Unlock()
+
+	select {
+	case <-done:
+		s.mu.Lock()
+		select {
+		case <-ready:
+			// Acquired the semaphore after we were canceled.
+			// Pretend we didn't and put the tokens back.
+			s.cur -= n
+			s.notifyWaiters()
+		default:
+			isFront := s.waiters.Front() == elem
+			s.waiters.Remove(elem)
+			// If we're at the front and there're extra tokens left, notify other waiters.
+			if isFront && s.size > s.cur {
+				s.notifyWaiters()
+			}
+		}
+		s.mu.Unlock()
+		return ctx.Err()
+
+	case <-ready:
+		// Acquired the semaphore. Check that ctx isn't already done.
+		// We check the done channel instead of calling ctx.Err because we
+		// already have the channel, and ctx.Err is O(n) with the nesting
+		// depth of ctx.
+		select {
+		case <-done:
+			s.Release(n)
+			return ctx.Err()
+		default:
+		}
+		return nil
+	}
+}
+
+// TryAcquire acquires the semaphore with a weight of n without blocking.
+// On success, returns true. On failure, returns false and leaves the semaphore unchanged.
+func (s *Weighted) TryAcquire(n int64) bool {
+	s.mu.Lock()
+	success := s.size-s.cur >= n && s.waiters.Len() == 0
+	if success {
+		s.cur += n
+	}
+	s.mu.Unlock()
+	return success
+}
+
+// Release releases the semaphore with a weight of n.
+func (s *Weighted) Release(n int64) {
+	s.mu.Lock()
+	s.cur -= n
+	if s.cur < 0 {
+		s.mu.Unlock()
+		panic("semaphore: released more than held")
+	}
+	s.notifyWaiters()
+	s.mu.Unlock()
+}
+
+func (s *Weighted) notifyWaiters() {
+	for {
+		next := s.waiters.Front()
+		if next == nil {
+			break // No more waiters blocked.
+		}
+
+		w := next.Value.(waiter)
+		if s.size-s.cur < w.n {
+			// Not enough tokens for the next waiter.  We could keep going (to try to
+			// find a waiter with a smaller request), but under load that could cause
+			// starvation for large requests; instead, we leave all remaining waiters
+			// blocked.
+			//
+			// Consider a semaphore used as a read-write lock, with N tokens, N
+			// readers, and one writer.  Each reader can Acquire(1) to obtain a read
+			// lock.  The writer can Acquire(N) to obtain a write lock, excluding all
+			// of the readers.  If we allow the readers to jump ahead in the queue,
+			// the writer will starve — there is always one token available for every
+			// reader.
+			break
+		}
+
+		s.cur += w.n
+		s.waiters.Remove(next)
+		close(w.ready)
+	}
+}

vendor/golang.org/x/sys/LICENSE

@@ -0,0 +1,27 @@
+Copyright 2009 The Go Authors.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+   * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+   * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+   * Neither the name of Google LLC nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

vendor/golang.org/x/sys/PATENTS

@@ -0,0 +1,22 @@
+Additional IP Rights Grant (Patents)
+
+"This implementation" means the copyrightable works distributed by
+Google as part of the Go project.
+
+Google hereby grants to You a perpetual, worldwide, non-exclusive,
+no-charge, royalty-free, irrevocable (except as stated in this section)
+patent license to make, have made, use, offer to sell, sell, import,
+transfer and otherwise run, modify and propagate the contents of this
+implementation of Go, where such license applies only to those patent
+claims, both currently owned or controlled by Google and acquired in
+the future, licensable by Google that are necessarily infringed by this
+implementation of Go.  This grant does not include claims that would be
+infringed only as a consequence of further modification of this
+implementation.  If you or your agent or exclusive licensee institute or
+order or agree to the institution of patent litigation against any
+entity (including a cross-claim or counterclaim in a lawsuit) alleging
+that this implementation of Go or any code incorporated within this
+implementation of Go constitutes direct or contributory patent
+infringement, or inducement of patent infringement, then any patent
+rights granted to you under this License for this implementation of Go
+shall terminate as of the date such litigation is filed.

vendor/golang.org/x/sys/cpu/asm_aix_ppc64.s

@@ -0,0 +1,17 @@
+// Copyright 2018 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build gc
+
+#include "textflag.h"
+
+//
+// System calls for ppc64, AIX are implemented in runtime/syscall_aix.go
+//
+
+TEXT ·syscall6(SB),NOSPLIT,$0-88
+	JMP	syscall·syscall6(SB)
+
+TEXT ·rawSyscall6(SB),NOSPLIT,$0-88
+	JMP	syscall·rawSyscall6(SB)

vendor/golang.org/x/sys/cpu/asm_darwin_x86_gc.s

@@ -0,0 +1,17 @@
+// Copyright 2024 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build darwin && amd64 && gc
+
+#include "textflag.h"
+
+TEXT libc_sysctl_trampoline<>(SB),NOSPLIT,$0-0
+	JMP	libc_sysctl(SB)
+GLOBL	·libc_sysctl_trampoline_addr(SB), RODATA, $8
+DATA	·libc_sysctl_trampoline_addr(SB)/8, $libc_sysctl_trampoline<>(SB)
+
+TEXT libc_sysctlbyname_trampoline<>(SB),NOSPLIT,$0-0
+	JMP	libc_sysctlbyname(SB)
+GLOBL	·libc_sysctlbyname_trampoline_addr(SB), RODATA, $8
+DATA	·libc_sysctlbyname_trampoline_addr(SB)/8, $libc_sysctlbyname_trampoline<>(SB)

vendor/golang.org/x/sys/cpu/byteorder.go

@@ -0,0 +1,66 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package cpu
+
+import (
+	"runtime"
+)
+
+// byteOrder is a subset of encoding/binary.ByteOrder.
+type byteOrder interface {
+	Uint32([]byte) uint32
+	Uint64([]byte) uint64
+}
+
+type littleEndian struct{}
+type bigEndian struct{}
+
+func (littleEndian) Uint32(b []byte) uint32 {
+	_ = b[3] // bounds check hint to compiler; see golang.org/issue/14808
+	return uint32(b[0]) | uint32(b[1])<<8 | uint32(b[2])<<16 | uint32(b[3])<<24
+}
+
+func (littleEndian) Uint64(b []byte) uint64 {
+	_ = b[7] // bounds check hint to compiler; see golang.org/issue/14808
+	return uint64(b[0]) | uint64(b[1])<<8 | uint64(b[2])<<16 | uint64(b[3])<<24 |
+		uint64(b[4])<<32 | uint64(b[5])<<40 | uint64(b[6])<<48 | uint64(b[7])<<56
+}
+
+func (bigEndian) Uint32(b []byte) uint32 {
+	_ = b[3] // bounds check hint to compiler; see golang.org/issue/14808
+	return uint32(b[3]) | uint32(b[2])<<8 | uint32(b[1])<<16 | uint32(b[0])<<24
+}
+
+func (bigEndian) Uint64(b []byte) uint64 {
+	_ = b[7] // bounds check hint to compiler; see golang.org/issue/14808
+	return uint64(b[7]) | uint64(b[6])<<8 | uint64(b[5])<<16 | uint64(b[4])<<24 |
+		uint64(b[3])<<32 | uint64(b[2])<<40 | uint64(b[1])<<48 | uint64(b[0])<<56
+}
+
+// hostByteOrder returns littleEndian on little-endian machines and
+// bigEndian on big-endian machines.
+func hostByteOrder() byteOrder {
+	switch runtime.GOARCH {
+	case "386", "amd64", "amd64p32",
+		"alpha",
+		"arm", "arm64",
+		"loong64",
+		"mipsle", "mips64le", "mips64p32le",
+		"nios2",
+		"ppc64le",
+		"riscv", "riscv64",
+		"sh":
+		return littleEndian{}
+	case "armbe", "arm64be",
+		"m68k",
+		"mips", "mips64", "mips64p32",
+		"ppc", "ppc64",
+		"s390", "s390x",
+		"shbe",
+		"sparc", "sparc64":
+		return bigEndian{}
+	}
+	panic("unknown architecture")
+}

vendor/golang.org/x/sys/cpu/cpu.go

@@ -0,0 +1,315 @@
+// Copyright 2018 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package cpu implements processor feature detection for
+// various CPU architectures.
+package cpu
+
+import (
+	"os"
+	"strings"
+)
+
+// Initialized reports whether the CPU features were initialized.
+//
+// For some GOOS/GOARCH combinations initialization of the CPU features depends
+// on reading an operating specific file, e.g. /proc/self/auxv on linux/arm
+// Initialized will report false if reading the file fails.
+var Initialized bool
+
+// CacheLinePad is used to pad structs to avoid false sharing.
+type CacheLinePad struct{ _ [cacheLineSize]byte }
+
+// X86 contains the supported CPU features of the
+// current X86/AMD64 platform. If the current platform
+// is not X86/AMD64 then all feature flags are false.
+//
+// X86 is padded to avoid false sharing. Further the HasAVX
+// and HasAVX2 are only set if the OS supports XMM and YMM
+// registers in addition to the CPUID feature bit being set.
+var X86 struct {
+	_                   CacheLinePad
+	HasAES              bool // AES hardware implementation (AES NI)
+	HasADX              bool // Multi-precision add-carry instruction extensions
+	HasAVX              bool // Advanced vector extension
+	HasAVX2             bool // Advanced vector extension 2
+	HasAVX512           bool // Advanced vector extension 512
+	HasAVX512F          bool // Advanced vector extension 512 Foundation Instructions
+	HasAVX512CD         bool // Advanced vector extension 512 Conflict Detection Instructions
+	HasAVX512ER         bool // Advanced vector extension 512 Exponential and Reciprocal Instructions
+	HasAVX512PF         bool // Advanced vector extension 512 Prefetch Instructions
+	HasAVX512VL         bool // Advanced vector extension 512 Vector Length Extensions
+	HasAVX512BW         bool // Advanced vector extension 512 Byte and Word Instructions
+	HasAVX512DQ         bool // Advanced vector extension 512 Doubleword and Quadword Instructions
+	HasAVX512IFMA       bool // Advanced vector extension 512 Integer Fused Multiply Add
+	HasAVX512VBMI       bool // Advanced vector extension 512 Vector Byte Manipulation Instructions
+	HasAVX5124VNNIW     bool // Advanced vector extension 512 Vector Neural Network Instructions Word variable precision
+	HasAVX5124FMAPS     bool // Advanced vector extension 512 Fused Multiply Accumulation Packed Single precision
+	HasAVX512VPOPCNTDQ  bool // Advanced vector extension 512 Double and quad word population count instructions
+	HasAVX512VPCLMULQDQ bool // Advanced vector extension 512 Vector carry-less multiply operations
+	HasAVX512VNNI       bool // Advanced vector extension 512 Vector Neural Network Instructions
+	HasAVX512GFNI       bool // Advanced vector extension 512 Galois field New Instructions
+	HasAVX512VAES       bool // Advanced vector extension 512 Vector AES instructions
+	HasAVX512VBMI2      bool // Advanced vector extension 512 Vector Byte Manipulation Instructions 2
+	HasAVX512BITALG     bool // Advanced vector extension 512 Bit Algorithms
+	HasAVX512BF16       bool // Advanced vector extension 512 BFloat16 Instructions
+	HasAMXTile          bool // Advanced Matrix Extension Tile instructions
+	HasAMXInt8          bool // Advanced Matrix Extension Int8 instructions
+	HasAMXBF16          bool // Advanced Matrix Extension BFloat16 instructions
+	HasBMI1             bool // Bit manipulation instruction set 1
+	HasBMI2             bool // Bit manipulation instruction set 2
+	HasCX16             bool // Compare and exchange 16 Bytes
+	HasERMS             bool // Enhanced REP for MOVSB and STOSB
+	HasFMA              bool // Fused-multiply-add instructions
+	HasOSXSAVE          bool // OS supports XSAVE/XRESTOR for saving/restoring XMM registers.
+	HasPCLMULQDQ        bool // PCLMULQDQ instruction - most often used for AES-GCM
+	HasPOPCNT           bool // Hamming weight instruction POPCNT.
+	HasRDRAND           bool // RDRAND instruction (on-chip random number generator)
+	HasRDSEED           bool // RDSEED instruction (on-chip random number generator)
+	HasSSE2             bool // Streaming SIMD extension 2 (always available on amd64)
+	HasSSE3             bool // Streaming SIMD extension 3
+	HasSSSE3            bool // Supplemental streaming SIMD extension 3
+	HasSSE41            bool // Streaming SIMD extension 4 and 4.1
+	HasSSE42            bool // Streaming SIMD extension 4 and 4.2
+	HasAVXIFMA          bool // Advanced vector extension Integer Fused Multiply Add
+	HasAVXVNNI          bool // Advanced vector extension Vector Neural Network Instructions
+	HasAVXVNNIInt8      bool // Advanced vector extension Vector Neural Network Int8 instructions
+	_                   CacheLinePad
+}
+
+// ARM64 contains the supported CPU features of the
+// current ARMv8(aarch64) platform. If the current platform
+// is not arm64 then all feature flags are false.
+var ARM64 struct {
+	_           CacheLinePad
+	HasFP       bool // Floating-point instruction set (always available)
+	HasASIMD    bool // Advanced SIMD (always available)
+	HasEVTSTRM  bool // Event stream support
+	HasAES      bool // AES hardware implementation
+	HasPMULL    bool // Polynomial multiplication instruction set
+	HasSHA1     bool // SHA1 hardware implementation
+	HasSHA2     bool // SHA2 hardware implementation
+	HasCRC32    bool // CRC32 hardware implementation
+	HasATOMICS  bool // Atomic memory operation instruction set
+	HasFPHP     bool // Half precision floating-point instruction set
+	HasASIMDHP  bool // Advanced SIMD half precision instruction set
+	HasCPUID    bool // CPUID identification scheme registers
+	HasASIMDRDM bool // Rounding double multiply add/subtract instruction set
+	HasJSCVT    bool // Javascript conversion from floating-point to integer
+	HasFCMA     bool // Floating-point multiplication and addition of complex numbers
+	HasLRCPC    bool // Release Consistent processor consistent support
+	HasDCPOP    bool // Persistent memory support
+	HasSHA3     bool // SHA3 hardware implementation
+	HasSM3      bool // SM3 hardware implementation
+	HasSM4      bool // SM4 hardware implementation
+	HasASIMDDP  bool // Advanced SIMD double precision instruction set
+	HasSHA512   bool // SHA512 hardware implementation
+	HasSVE      bool // Scalable Vector Extensions
+	HasSVE2     bool // Scalable Vector Extensions 2
+	HasASIMDFHM bool // Advanced SIMD multiplication FP16 to FP32
+	HasDIT      bool // Data Independent Timing support
+	HasI8MM     bool // Advanced SIMD Int8 matrix multiplication instructions
+	_           CacheLinePad
+}
+
+// ARM contains the supported CPU features of the current ARM (32-bit) platform.
+// All feature flags are false if:
+//  1. the current platform is not arm, or
+//  2. the current operating system is not Linux.
+var ARM struct {
+	_           CacheLinePad
+	HasSWP      bool // SWP instruction support
+	HasHALF     bool // Half-word load and store support
+	HasTHUMB    bool // ARM Thumb instruction set
+	Has26BIT    bool // Address space limited to 26-bits
+	HasFASTMUL  bool // 32-bit operand, 64-bit result multiplication support
+	HasFPA      bool // Floating point arithmetic support
+	HasVFP      bool // Vector floating point support
+	HasEDSP     bool // DSP Extensions support
+	HasJAVA     bool // Java instruction set
+	HasIWMMXT   bool // Intel Wireless MMX technology support
+	HasCRUNCH   bool // MaverickCrunch context switching and handling
+	HasTHUMBEE  bool // Thumb EE instruction set
+	HasNEON     bool // NEON instruction set
+	HasVFPv3    bool // Vector floating point version 3 support
+	HasVFPv3D16 bool // Vector floating point version 3 D8-D15
+	HasTLS      bool // Thread local storage support
+	HasVFPv4    bool // Vector floating point version 4 support
+	HasIDIVA    bool // Integer divide instruction support in ARM mode
+	HasIDIVT    bool // Integer divide instruction support in Thumb mode
+	HasVFPD32   bool // Vector floating point version 3 D15-D31
+	HasLPAE     bool // Large Physical Address Extensions
+	HasEVTSTRM  bool // Event stream support
+	HasAES      bool // AES hardware implementation
+	HasPMULL    bool // Polynomial multiplication instruction set
+	HasSHA1     bool // SHA1 hardware implementation
+	HasSHA2     bool // SHA2 hardware implementation
+	HasCRC32    bool // CRC32 hardware implementation
+	_           CacheLinePad
+}
+
+// MIPS64X contains the supported CPU features of the current mips64/mips64le
+// platforms. If the current platform is not mips64/mips64le or the current
+// operating system is not Linux then all feature flags are false.
+var MIPS64X struct {
+	_      CacheLinePad
+	HasMSA bool // MIPS SIMD architecture
+	_      CacheLinePad
+}
+
+// PPC64 contains the supported CPU features of the current ppc64/ppc64le platforms.
+// If the current platform is not ppc64/ppc64le then all feature flags are false.
+//
+// For ppc64/ppc64le, it is safe to check only for ISA level starting on ISA v3.00,
+// since there are no optional categories. There are some exceptions that also
+// require kernel support to work (DARN, SCV), so there are feature bits for
+// those as well. The struct is padded to avoid false sharing.
+var PPC64 struct {
+	_        CacheLinePad
+	HasDARN  bool // Hardware random number generator (requires kernel enablement)
+	HasSCV   bool // Syscall vectored (requires kernel enablement)
+	IsPOWER8 bool // ISA v2.07 (POWER8)
+	IsPOWER9 bool // ISA v3.00 (POWER9), implies IsPOWER8
+	_        CacheLinePad
+}
+
+// S390X contains the supported CPU features of the current IBM Z
+// (s390x) platform. If the current platform is not IBM Z then all
+// feature flags are false.
+//
+// S390X is padded to avoid false sharing. Further HasVX is only set
+// if the OS supports vector registers in addition to the STFLE
+// feature bit being set.
+var S390X struct {
+	_         CacheLinePad
+	HasZARCH  bool // z/Architecture mode is active [mandatory]
+	HasSTFLE  bool // store facility list extended
+	HasLDISP  bool // long (20-bit) displacements
+	HasEIMM   bool // 32-bit immediates
+	HasDFP    bool // decimal floating point
+	HasETF3EH bool // ETF-3 enhanced
+	HasMSA    bool // message security assist (CPACF)
+	HasAES    bool // KM-AES{128,192,256} functions
+	HasAESCBC bool // KMC-AES{128,192,256} functions
+	HasAESCTR bool // KMCTR-AES{128,192,256} functions
+	HasAESGCM bool // KMA-GCM-AES{128,192,256} functions
+	HasGHASH  bool // KIMD-GHASH function
+	HasSHA1   bool // K{I,L}MD-SHA-1 functions
+	HasSHA256 bool // K{I,L}MD-SHA-256 functions
+	HasSHA512 bool // K{I,L}MD-SHA-512 functions
+	HasSHA3   bool // K{I,L}MD-SHA3-{224,256,384,512} and K{I,L}MD-SHAKE-{128,256} functions
+	HasVX     bool // vector facility
+	HasVXE    bool // vector-enhancements facility 1
+	_         CacheLinePad
+}
+
+// RISCV64 contains the supported CPU features and performance characteristics for riscv64
+// platforms. The booleans in RISCV64, with the exception of HasFastMisaligned, indicate
+// the presence of RISC-V extensions.
+//
+// It is safe to assume that all the RV64G extensions are supported and so they are omitted from
+// this structure. As riscv64 Go programs require at least RV64G, the code that populates
+// this structure cannot run successfully if some of the RV64G extensions are missing.
+// The struct is padded to avoid false sharing.
+var RISCV64 struct {
+	_                 CacheLinePad
+	HasFastMisaligned bool // Fast misaligned accesses
+	HasC              bool // Compressed instruction-set extension
+	HasV              bool // Vector extension compatible with RVV 1.0
+	HasZba            bool // Address generation instructions extension
+	HasZbb            bool // Basic bit-manipulation extension
+	HasZbs            bool // Single-bit instructions extension
+	_                 CacheLinePad
+}
+
+func init() {
+	archInit()
+	initOptions()
+	processOptions()
+}
+
+// options contains the cpu debug options that can be used in GODEBUG.
+// Options are arch dependent and are added by the arch specific initOptions functions.
+// Features that are mandatory for the specific GOARCH should have the Required field set
+// (e.g. SSE2 on amd64).
+var options []option
+
+// Option names should be lower case. e.g. avx instead of AVX.
+type option struct {
+	Name      string
+	Feature   *bool
+	Specified bool // whether feature value was specified in GODEBUG
+	Enable    bool // whether feature should be enabled
+	Required  bool // whether feature is mandatory and can not be disabled
+}
+
+func processOptions() {
+	env := os.Getenv("GODEBUG")
+field:
+	for env != "" {
+		field := ""
+		i := strings.IndexByte(env, ',')
+		if i < 0 {
+			field, env = env, ""
+		} else {
+			field, env = env[:i], env[i+1:]
+		}
+		if len(field) < 4 || field[:4] != "cpu." {
+			continue
+		}
+		i = strings.IndexByte(field, '=')
+		if i < 0 {
+			print("GODEBUG sys/cpu: no value specified for \"", field, "\"\n")
+			continue
+		}
+		key, value := field[4:i], field[i+1:] // e.g. "SSE2", "on"
+
+		var enable bool
+		switch value {
+		case "on":
+			enable = true
+		case "off":
+			enable = false
+		default:
+			print("GODEBUG sys/cpu: value \"", value, "\" not supported for cpu option \"", key, "\"\n")
+			continue field
+		}
+
+		if key == "all" {
+			for i := range options {
+				options[i].Specified = true
+				options[i].Enable = enable || options[i].Required
+			}
+			continue field
+		}
+
+		for i := range options {
+			if options[i].Name == key {
+				options[i].Specified = true
+				options[i].Enable = enable
+				continue field
+			}
+		}
+
+		print("GODEBUG sys/cpu: unknown cpu feature \"", key, "\"\n")
+	}
+
+	for _, o := range options {
+		if !o.Specified {
+			continue
+		}
+
+		if o.Enable && !*o.Feature {
+			print("GODEBUG sys/cpu: can not enable \"", o.Name, "\", missing CPU support\n")
+			continue
+		}
+
+		if !o.Enable && o.Required {
+			print("GODEBUG sys/cpu: can not disable \"", o.Name, "\", required CPU feature\n")
+			continue
+		}
+
+		*o.Feature = o.Enable
+	}
+}

vendor/golang.org/x/sys/cpu/cpu_aix.go

@@ -0,0 +1,33 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build aix
+
+package cpu
+
+const (
+	// getsystemcfg constants
+	_SC_IMPL     = 2
+	_IMPL_POWER8 = 0x10000
+	_IMPL_POWER9 = 0x20000
+)
+
+func archInit() {
+	impl := getsystemcfg(_SC_IMPL)
+	if impl&_IMPL_POWER8 != 0 {
+		PPC64.IsPOWER8 = true
+	}
+	if impl&_IMPL_POWER9 != 0 {
+		PPC64.IsPOWER8 = true
+		PPC64.IsPOWER9 = true
+	}
+
+	Initialized = true
+}
+
+func getsystemcfg(label int) (n uint64) {
+	r0, _ := callgetsystemcfg(label)
+	n = uint64(r0)
+	return
+}

vendor/golang.org/x/sys/cpu/cpu_arm.go

@@ -0,0 +1,73 @@
+// Copyright 2018 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package cpu
+
+const cacheLineSize = 32
+
+// HWCAP/HWCAP2 bits.
+// These are specific to Linux.
+const (
+	hwcap_SWP       = 1 << 0
+	hwcap_HALF      = 1 << 1
+	hwcap_THUMB     = 1 << 2
+	hwcap_26BIT     = 1 << 3
+	hwcap_FAST_MULT = 1 << 4
+	hwcap_FPA       = 1 << 5
+	hwcap_VFP       = 1 << 6
+	hwcap_EDSP      = 1 << 7
+	hwcap_JAVA      = 1 << 8
+	hwcap_IWMMXT    = 1 << 9
+	hwcap_CRUNCH    = 1 << 10
+	hwcap_THUMBEE   = 1 << 11
+	hwcap_NEON      = 1 << 12
+	hwcap_VFPv3     = 1 << 13
+	hwcap_VFPv3D16  = 1 << 14
+	hwcap_TLS       = 1 << 15
+	hwcap_VFPv4     = 1 << 16
+	hwcap_IDIVA     = 1 << 17
+	hwcap_IDIVT     = 1 << 18
+	hwcap_VFPD32    = 1 << 19
+	hwcap_LPAE      = 1 << 20
+	hwcap_EVTSTRM   = 1 << 21
+
+	hwcap2_AES   = 1 << 0
+	hwcap2_PMULL = 1 << 1
+	hwcap2_SHA1  = 1 << 2
+	hwcap2_SHA2  = 1 << 3
+	hwcap2_CRC32 = 1 << 4
+)
+
+func initOptions() {
+	options = []option{
+		{Name: "pmull", Feature: &ARM.HasPMULL},
+		{Name: "sha1", Feature: &ARM.HasSHA1},
+		{Name: "sha2", Feature: &ARM.HasSHA2},
+		{Name: "swp", Feature: &ARM.HasSWP},
+		{Name: "thumb", Feature: &ARM.HasTHUMB},
+		{Name: "thumbee", Feature: &ARM.HasTHUMBEE},
+		{Name: "tls", Feature: &ARM.HasTLS},
+		{Name: "vfp", Feature: &ARM.HasVFP},
+		{Name: "vfpd32", Feature: &ARM.HasVFPD32},
+		{Name: "vfpv3", Feature: &ARM.HasVFPv3},
+		{Name: "vfpv3d16", Feature: &ARM.HasVFPv3D16},
+		{Name: "vfpv4", Feature: &ARM.HasVFPv4},
+		{Name: "half", Feature: &ARM.HasHALF},
+		{Name: "26bit", Feature: &ARM.Has26BIT},
+		{Name: "fastmul", Feature: &ARM.HasFASTMUL},
+		{Name: "fpa", Feature: &ARM.HasFPA},
+		{Name: "edsp", Feature: &ARM.HasEDSP},
+		{Name: "java", Feature: &ARM.HasJAVA},
+		{Name: "iwmmxt", Feature: &ARM.HasIWMMXT},
+		{Name: "crunch", Feature: &ARM.HasCRUNCH},
+		{Name: "neon", Feature: &ARM.HasNEON},
+		{Name: "idivt", Feature: &ARM.HasIDIVT},
+		{Name: "idiva", Feature: &ARM.HasIDIVA},
+		{Name: "lpae", Feature: &ARM.HasLPAE},
+		{Name: "evtstrm", Feature: &ARM.HasEVTSTRM},
+		{Name: "aes", Feature: &ARM.HasAES},
+		{Name: "crc32", Feature: &ARM.HasCRC32},
+	}
+
+}

vendor/golang.org/x/sys/cpu/cpu_arm64.go

@@ -0,0 +1,194 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package cpu
+
+import "runtime"
+
+// cacheLineSize is used to prevent false sharing of cache lines.
+// We choose 128 because Apple Silicon, a.k.a. M1, has 128-byte cache line size.
+// It doesn't cost much and is much more future-proof.
+const cacheLineSize = 128
+
+func initOptions() {
+	options = []option{
+		{Name: "fp", Feature: &ARM64.HasFP},
+		{Name: "asimd", Feature: &ARM64.HasASIMD},
+		{Name: "evstrm", Feature: &ARM64.HasEVTSTRM},
+		{Name: "aes", Feature: &ARM64.HasAES},
+		{Name: "fphp", Feature: &ARM64.HasFPHP},
+		{Name: "jscvt", Feature: &ARM64.HasJSCVT},
+		{Name: "lrcpc", Feature: &ARM64.HasLRCPC},
+		{Name: "pmull", Feature: &ARM64.HasPMULL},
+		{Name: "sha1", Feature: &ARM64.HasSHA1},
+		{Name: "sha2", Feature: &ARM64.HasSHA2},
+		{Name: "sha3", Feature: &ARM64.HasSHA3},
+		{Name: "sha512", Feature: &ARM64.HasSHA512},
+		{Name: "sm3", Feature: &ARM64.HasSM3},
+		{Name: "sm4", Feature: &ARM64.HasSM4},
+		{Name: "sve", Feature: &ARM64.HasSVE},
+		{Name: "sve2", Feature: &ARM64.HasSVE2},
+		{Name: "crc32", Feature: &ARM64.HasCRC32},
+		{Name: "atomics", Feature: &ARM64.HasATOMICS},
+		{Name: "asimdhp", Feature: &ARM64.HasASIMDHP},
+		{Name: "cpuid", Feature: &ARM64.HasCPUID},
+		{Name: "asimrdm", Feature: &ARM64.HasASIMDRDM},
+		{Name: "fcma", Feature: &ARM64.HasFCMA},
+		{Name: "dcpop", Feature: &ARM64.HasDCPOP},
+		{Name: "asimddp", Feature: &ARM64.HasASIMDDP},
+		{Name: "asimdfhm", Feature: &ARM64.HasASIMDFHM},
+		{Name: "dit", Feature: &ARM64.HasDIT},
+		{Name: "i8mm", Feature: &ARM64.HasI8MM},
+	}
+}
+
+func archInit() {
+	switch runtime.GOOS {
+	case "freebsd":
+		readARM64Registers()
+	case "linux", "netbsd", "openbsd":
+		doinit()
+	default:
+		// Many platforms don't seem to allow reading these registers.
+		setMinimalFeatures()
+	}
+}
+
+// setMinimalFeatures fakes the minimal ARM64 features expected by
+// TestARM64minimalFeatures.
+func setMinimalFeatures() {
+	ARM64.HasASIMD = true
+	ARM64.HasFP = true
+}
+
+func readARM64Registers() {
+	Initialized = true
+
+	parseARM64SystemRegisters(getisar0(), getisar1(), getpfr0())
+}
+
+func parseARM64SystemRegisters(isar0, isar1, pfr0 uint64) {
+	// ID_AA64ISAR0_EL1
+	switch extractBits(isar0, 4, 7) {
+	case 1:
+		ARM64.HasAES = true
+	case 2:
+		ARM64.HasAES = true
+		ARM64.HasPMULL = true
+	}
+
+	switch extractBits(isar0, 8, 11) {
+	case 1:
+		ARM64.HasSHA1 = true
+	}
+
+	switch extractBits(isar0, 12, 15) {
+	case 1:
+		ARM64.HasSHA2 = true
+	case 2:
+		ARM64.HasSHA2 = true
+		ARM64.HasSHA512 = true
+	}
+
+	switch extractBits(isar0, 16, 19) {
+	case 1:
+		ARM64.HasCRC32 = true
+	}
+
+	switch extractBits(isar0, 20, 23) {
+	case 2:
+		ARM64.HasATOMICS = true
+	}
+
+	switch extractBits(isar0, 28, 31) {
+	case 1:
+		ARM64.HasASIMDRDM = true
+	}
+
+	switch extractBits(isar0, 32, 35) {
+	case 1:
+		ARM64.HasSHA3 = true
+	}
+
+	switch extractBits(isar0, 36, 39) {
+	case 1:
+		ARM64.HasSM3 = true
+	}
+
+	switch extractBits(isar0, 40, 43) {
+	case 1:
+		ARM64.HasSM4 = true
+	}
+
+	switch extractBits(isar0, 44, 47) {
+	case 1:
+		ARM64.HasASIMDDP = true
+	}
+
+	// ID_AA64ISAR1_EL1
+	switch extractBits(isar1, 0, 3) {
+	case 1:
+		ARM64.HasDCPOP = true
+	}
+
+	switch extractBits(isar1, 12, 15) {
+	case 1:
+		ARM64.HasJSCVT = true
+	}
+
+	switch extractBits(isar1, 16, 19) {
+	case 1:
+		ARM64.HasFCMA = true
+	}
+
+	switch extractBits(isar1, 20, 23) {
+	case 1:
+		ARM64.HasLRCPC = true
+	}
+
+	switch extractBits(isar1, 52, 55) {
+	case 1:
+		ARM64.HasI8MM = true
+	}
+
+	// ID_AA64PFR0_EL1
+	switch extractBits(pfr0, 16, 19) {
+	case 0:
+		ARM64.HasFP = true
+	case 1:
+		ARM64.HasFP = true
+		ARM64.HasFPHP = true
+	}
+
+	switch extractBits(pfr0, 20, 23) {
+	case 0:
+		ARM64.HasASIMD = true
+	case 1:
+		ARM64.HasASIMD = true
+		ARM64.HasASIMDHP = true
+	}
+
+	switch extractBits(pfr0, 32, 35) {
+	case 1:
+		ARM64.HasSVE = true
+
+		parseARM64SVERegister(getzfr0())
+	}
+
+	switch extractBits(pfr0, 48, 51) {
+	case 1:
+		ARM64.HasDIT = true
+	}
+}
+
+func parseARM64SVERegister(zfr0 uint64) {
+	switch extractBits(zfr0, 0, 3) {
+	case 1:
+		ARM64.HasSVE2 = true
+	}
+}
+
+func extractBits(data uint64, start, end uint) uint {
+	return (uint)(data>>start) & ((1 << (end - start + 1)) - 1)
+}

vendor/golang.org/x/sys/cpu/cpu_arm64.s

@@ -0,0 +1,39 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build gc
+
+#include "textflag.h"
+
+// func getisar0() uint64
+TEXT ·getisar0(SB),NOSPLIT,$0-8
+	// get Instruction Set Attributes 0 into x0
+	// mrs x0, ID_AA64ISAR0_EL1 = d5380600
+	WORD	$0xd5380600
+	MOVD	R0, ret+0(FP)
+	RET
+
+// func getisar1() uint64
+TEXT ·getisar1(SB),NOSPLIT,$0-8
+	// get Instruction Set Attributes 1 into x0
+	// mrs x0, ID_AA64ISAR1_EL1 = d5380620
+	WORD	$0xd5380620
+	MOVD	R0, ret+0(FP)
+	RET
+
+// func getpfr0() uint64
+TEXT ·getpfr0(SB),NOSPLIT,$0-8
+	// get Processor Feature Register 0 into x0
+	// mrs x0, ID_AA64PFR0_EL1 = d5380400
+	WORD	$0xd5380400
+	MOVD	R0, ret+0(FP)
+	RET
+
+// func getzfr0() uint64
+TEXT ·getzfr0(SB),NOSPLIT,$0-8
+	// get SVE Feature Register 0 into x0
+	// mrs	x0, ID_AA64ZFR0_EL1 = d5380480
+	WORD $0xd5380480
+	MOVD	R0, ret+0(FP)
+	RET

vendor/golang.org/x/sys/cpu/cpu_darwin_x86.go

@@ -0,0 +1,61 @@
+// Copyright 2024 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build darwin && amd64 && gc
+
+package cpu
+
+// darwinSupportsAVX512 checks Darwin kernel for AVX512 support via sysctl
+// call (see issue 43089). It also restricts AVX512 support for Darwin to
+// kernel version 21.3.0 (MacOS 12.2.0) or later (see issue 49233).
+//
+// Background:
+// Darwin implements a special mechanism to economize on thread state when
+// AVX512 specific registers are not in use. This scheme minimizes state when
+// preempting threads that haven't yet used any AVX512 instructions, but adds
+// special requirements to check for AVX512 hardware support at runtime (e.g.
+// via sysctl call or commpage inspection). See issue 43089 and link below for
+// full background:
+// https://github.com/apple-oss-distributions/xnu/blob/xnu-11215.1.10/osfmk/i386/fpu.c#L214-L240
+//
+// Additionally, all versions of the Darwin kernel from 19.6.0 through 21.2.0
+// (corresponding to MacOS 10.15.6 - 12.1) have a bug that can cause corruption
+// of the AVX512 mask registers (K0-K7) upon signal return. For this reason
+// AVX512 is considered unsafe to use on Darwin for kernel versions prior to
+// 21.3.0, where a fix has been confirmed. See issue 49233 for full background.
+func darwinSupportsAVX512() bool {
+	return darwinSysctlEnabled([]byte("hw.optional.avx512f\x00")) && darwinKernelVersionCheck(21, 3, 0)
+}
+
+// Ensure Darwin kernel version is at least major.minor.patch, avoiding dependencies
+func darwinKernelVersionCheck(major, minor, patch int) bool {
+	var release [256]byte
+	err := darwinOSRelease(&release)
+	if err != nil {
+		return false
+	}
+
+	var mmp [3]int
+	c := 0
+Loop:
+	for _, b := range release[:] {
+		switch {
+		case b >= '0' && b <= '9':
+			mmp[c] = 10*mmp[c] + int(b-'0')
+		case b == '.':
+			c++
+			if c > 2 {
+				return false
+			}
+		case b == 0:
+			break Loop
+		default:
+			return false
+		}
+	}
+	if c != 2 {
+		return false
+	}
+	return mmp[0] > major || mmp[0] == major && (mmp[1] > minor || mmp[1] == minor && mmp[2] >= patch)
+}

vendor/golang.org/x/sys/cpu/cpu_gc_arm64.go

@@ -0,0 +1,12 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build gc
+
+package cpu
+
+func getisar0() uint64
+func getisar1() uint64
+func getpfr0() uint64
+func getzfr0() uint64

vendor/golang.org/x/sys/cpu/cpu_gc_s390x.go

@@ -0,0 +1,21 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build gc
+
+package cpu
+
+// haveAsmFunctions reports whether the other functions in this file can
+// be safely called.
+func haveAsmFunctions() bool { return true }
+
+// The following feature detection functions are defined in cpu_s390x.s.
+// They are likely to be expensive to call so the results should be cached.
+func stfle() facilityList
+func kmQuery() queryResult
+func kmcQuery() queryResult
+func kmctrQuery() queryResult
+func kmaQuery() queryResult
+func kimdQuery() queryResult
+func klmdQuery() queryResult

vendor/golang.org/x/sys/cpu/cpu_gc_x86.go

@@ -0,0 +1,15 @@
+// Copyright 2018 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build (386 || amd64 || amd64p32) && gc
+
+package cpu
+
+// cpuid is implemented in cpu_gc_x86.s for gc compiler
+// and in cpu_gccgo.c for gccgo.
+func cpuid(eaxArg, ecxArg uint32) (eax, ebx, ecx, edx uint32)
+
+// xgetbv with ecx = 0 is implemented in cpu_gc_x86.s for gc compiler
+// and in cpu_gccgo.c for gccgo.
+func xgetbv() (eax, edx uint32)

vendor/golang.org/x/sys/cpu/cpu_gc_x86.s

@@ -0,0 +1,26 @@
+// Copyright 2018 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build (386 || amd64 || amd64p32) && gc
+
+#include "textflag.h"
+
+// func cpuid(eaxArg, ecxArg uint32) (eax, ebx, ecx, edx uint32)
+TEXT ·cpuid(SB), NOSPLIT, $0-24
+	MOVL eaxArg+0(FP), AX
+	MOVL ecxArg+4(FP), CX
+	CPUID
+	MOVL AX, eax+8(FP)
+	MOVL BX, ebx+12(FP)
+	MOVL CX, ecx+16(FP)
+	MOVL DX, edx+20(FP)
+	RET
+
+// func xgetbv() (eax, edx uint32)
+TEXT ·xgetbv(SB), NOSPLIT, $0-8
+	MOVL $0, CX
+	XGETBV
+	MOVL AX, eax+0(FP)
+	MOVL DX, edx+4(FP)
+	RET

vendor/golang.org/x/sys/cpu/cpu_gccgo_arm64.go

@@ -0,0 +1,11 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build gccgo
+
+package cpu
+
+func getisar0() uint64 { return 0 }
+func getisar1() uint64 { return 0 }
+func getpfr0() uint64  { return 0 }

vendor/golang.org/x/sys/cpu/cpu_gccgo_s390x.go

@@ -0,0 +1,22 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build gccgo
+
+package cpu
+
+// haveAsmFunctions reports whether the other functions in this file can
+// be safely called.
+func haveAsmFunctions() bool { return false }
+
+// TODO(mundaym): the following feature detection functions are currently
+// stubs. See https://golang.org/cl/162887 for how to fix this.
+// They are likely to be expensive to call so the results should be cached.
+func stfle() facilityList     { panic("not implemented for gccgo") }
+func kmQuery() queryResult    { panic("not implemented for gccgo") }
+func kmcQuery() queryResult   { panic("not implemented for gccgo") }
+func kmctrQuery() queryResult { panic("not implemented for gccgo") }
+func kmaQuery() queryResult   { panic("not implemented for gccgo") }
+func kimdQuery() queryResult  { panic("not implemented for gccgo") }
+func klmdQuery() queryResult  { panic("not implemented for gccgo") }

vendor/golang.org/x/sys/cpu/cpu_gccgo_x86.c

@@ -0,0 +1,37 @@
+// Copyright 2018 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build (386 || amd64 || amd64p32) && gccgo
+
+#include <cpuid.h>
+#include <stdint.h>
+#include <x86intrin.h>
+
+// Need to wrap __get_cpuid_count because it's declared as static.
+int
+gccgoGetCpuidCount(uint32_t leaf, uint32_t subleaf,
+                   uint32_t *eax, uint32_t *ebx,
+                   uint32_t *ecx, uint32_t *edx)
+{
+	return __get_cpuid_count(leaf, subleaf, eax, ebx, ecx, edx);
+}
+
+#pragma GCC diagnostic ignored "-Wunknown-pragmas"
+#pragma GCC push_options
+#pragma GCC target("xsave")
+#pragma clang attribute push (__attribute__((target("xsave"))), apply_to=function)
+
+// xgetbv reads the contents of an XCR (Extended Control Register)
+// specified in the ECX register into registers EDX:EAX.
+// Currently, the only supported value for XCR is 0.
+void
+gccgoXgetbv(uint32_t *eax, uint32_t *edx)
+{
+	uint64_t v = _xgetbv(0);
+	*eax = v & 0xffffffff;
+	*edx = v >> 32;
+}
+
+#pragma clang attribute pop
+#pragma GCC pop_options

vendor/golang.org/x/sys/cpu/cpu_gccgo_x86.go

@@ -0,0 +1,25 @@
+// Copyright 2018 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build (386 || amd64 || amd64p32) && gccgo
+
+package cpu
+
+//extern gccgoGetCpuidCount
+func gccgoGetCpuidCount(eaxArg, ecxArg uint32, eax, ebx, ecx, edx *uint32)
+
+func cpuid(eaxArg, ecxArg uint32) (eax, ebx, ecx, edx uint32) {
+	var a, b, c, d uint32
+	gccgoGetCpuidCount(eaxArg, ecxArg, &a, &b, &c, &d)
+	return a, b, c, d
+}
+
+//extern gccgoXgetbv
+func gccgoXgetbv(eax, edx *uint32)
+
+func xgetbv() (eax, edx uint32) {
+	var a, d uint32
+	gccgoXgetbv(&a, &d)
+	return a, d
+}

vendor/golang.org/x/sys/cpu/cpu_linux.go

@@ -0,0 +1,15 @@
+// Copyright 2018 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+//go:build !386 && !amd64 && !amd64p32 && !arm64
+
+package cpu
+
+func archInit() {
+	if err := readHWCAP(); err != nil {
+		return
+	}
+	doinit()
+	Initialized = true
+}

vendor/golang.org/x/sys/cpu/cpu_linux_arm.go

@@ -0,0 +1,39 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package cpu
+
+func doinit() {
+	ARM.HasSWP = isSet(hwCap, hwcap_SWP)
+	ARM.HasHALF = isSet(hwCap, hwcap_HALF)
+	ARM.HasTHUMB = isSet(hwCap, hwcap_THUMB)
+	ARM.Has26BIT = isSet(hwCap, hwcap_26BIT)
+	ARM.HasFASTMUL = isSet(hwCap, hwcap_FAST_MULT)
+	ARM.HasFPA = isSet(hwCap, hwcap_FPA)
+	ARM.HasVFP = isSet(hwCap, hwcap_VFP)
+	ARM.HasEDSP = isSet(hwCap, hwcap_EDSP)
+	ARM.HasJAVA = isSet(hwCap, hwcap_JAVA)
+	ARM.HasIWMMXT = isSet(hwCap, hwcap_IWMMXT)
+	ARM.HasCRUNCH = isSet(hwCap, hwcap_CRUNCH)
+	ARM.HasTHUMBEE = isSet(hwCap, hwcap_THUMBEE)
+	ARM.HasNEON = isSet(hwCap, hwcap_NEON)
+	ARM.HasVFPv3 = isSet(hwCap, hwcap_VFPv3)
+	ARM.HasVFPv3D16 = isSet(hwCap, hwcap_VFPv3D16)
+	ARM.HasTLS = isSet(hwCap, hwcap_TLS)
+	ARM.HasVFPv4 = isSet(hwCap, hwcap_VFPv4)
+	ARM.HasIDIVA = isSet(hwCap, hwcap_IDIVA)
+	ARM.HasIDIVT = isSet(hwCap, hwcap_IDIVT)
+	ARM.HasVFPD32 = isSet(hwCap, hwcap_VFPD32)
+	ARM.HasLPAE = isSet(hwCap, hwcap_LPAE)
+	ARM.HasEVTSTRM = isSet(hwCap, hwcap_EVTSTRM)
+	ARM.HasAES = isSet(hwCap2, hwcap2_AES)
+	ARM.HasPMULL = isSet(hwCap2, hwcap2_PMULL)
+	ARM.HasSHA1 = isSet(hwCap2, hwcap2_SHA1)
+	ARM.HasSHA2 = isSet(hwCap2, hwcap2_SHA2)
+	ARM.HasCRC32 = isSet(hwCap2, hwcap2_CRC32)
+}
+
+func isSet(hwc uint, value uint) bool {
+	return hwc&value != 0
+}